Jump to content
SAU Community

Fitting R34 V Spec 2 Pedal Boots (Aluminium) Onto Pedals

GTR600

By GTR600,
in Exterior & Interior Styling

 Share

Recommended Posts

GTR600 Proficient

GTR600

Posted
Posted

All,

Iv bought the V Spec2, R34 Pedal set and I am having trouble installing the clutch and brake pedals. Given the originals are rubber they are easily "rolled" onto the pedal assembly however given the new pedals are aluminium they are not as easy to install. Any Tips?

Secondly,

Is anyone aware of the Part No. required for the bushes required to fit V Spec 2 R34 Pedals onto V Spec Model?

Thanks :)

Charles89 Grand Master

Charles89

Posted
Posted

I installed mine a week or 2 ago, it was absolutely pain in the ass to install the brake and clutch pedals.

It took me about an hour to get them both fitted.... lol

At the end, I just used a heat gun to heat up the rubber on the back, to make it a bit softer, then quickly try and stretch it around the pedals. Might take a few goes but it will work.

As for the bushes, I have a bush from the accelerator pedal that I don't need for my GTT.

GTR600 Proficient

GTR600

Posted
  • Author
Posted

Ha Ha! Thought I might of been doing something wrong! Lost skin on my finger tips trying to get these on! I'll try the heat gun!

Mate if thats the only part required can you please PM me a price incl postage to 4122.

Ta Charles

Charles89 Grand Master

Charles89

Posted
Posted

Haha yeah, its a f***ing pain!

But what I also realise is that you can actually bend the pedals if you aren't careful, the aluminium is bendable.

I also sent you a PM :)

  • 2 years later...
Wongy Proficient

Wongy

Posted
Posted

Is the Accelerator pedal hard to install? it doesn't look hard just from looking at the pedal, but looks can be deceiving, what would i need to take off in order to install the accelerator pedal?

Thanks :)

Shoujiki Proficient

Shoujiki

Posted
Posted

^ If you have a GTT, you need to trim off some of the pedal (after you remove the old plastic cover of course). I took about 10mm off the top left edge and files it down, painted it and then the GTR pedal cover went on nicely. There must be a difference between BNR and ER 34 accell pedal's.

75coupe Grand Master

75coupe

Posted
Posted

hmmm I cant remember specifically installing the footrest but I do know that the accellerator was the hardest part for me, thats in a r33gtst...

I would of thought 34gtr would be easy considering its made for that car...

Shoota_77 Veteran

Shoota_77

Posted
Posted

It's a poofter of a job doing the clutch and brake pedals...

I sweated and huffed and puffed and cursed and cried a little inside before mine were on.

My fingers felt like I'd smacked them with a hammer for 5 minutes straight after it.

A good looking simple upgrade though!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JoVo
      Auto Electrician Workshop Recommendation for Reverse Camera Not Working CKV36 (SYD or WOL)

      By JoVo · Posted

      Update: Tunehouse looked into the problem and identified a wiring issue between the camera unit and the connector. They managed to get it working , but did warn me at some point it will stop working again. From their perspective it is unserviceable and will need replacement. They did some research and found that the new replacement camera would be Approx $1400 supply only (their fitting cost would be $190) . They did provide the part number (28442-JL05B) and a quick google of the part number shows that these are rather expensive brand new (seemingly no longer in manufacture) for the places that still have them in stock, with the used option potentially presenting  the same issue down the track at some unknown point. They are happy for me to supply the part so that they can fit it. Decisions, decisions... I can definitely recommend Tunehouse (thankyou Vee37!). Cost for the diagnosis was as quoted  ($190) , car was ready on time and communication was top notch. Their workshop is super clean and modern, and there was plenty of car candy parked out the front on the day I went.   Would definitely go back.   
    • r32-25t
      R32 Gtr Long Term Love, Now Project

      By r32-25t · Posted

      to fix the voltage drop issue I swapped out the old 150amp alternator which turns out is a brand known for having issues and replaced it with the black 180amp alternator beside it 
    • S1_C34
      A31 Digital Climate Control

      By S1_C34 · Posted

      For anyone interested, the Way Back Machine has that Japanese website archived with pictures, etc: https://web.archive.org/web/20051023225805fw_/http://www.a31cefiro.com/air_con.htm "Simply swapping the wiring of the harness will not allow it to function properly. For the outdoor air sensor and sunlight sensor, disconnect the wiring connected to CN1-11 of the air conditioning harness from the harness and connect the sensor side wiring to earth. For the indoor air sensor, disconnect the wiring connected to CN2-3 of the air conditioning harness from the harness and connect the sensor side wiring to earth. The connector PIN numbers listed here are the genuine A31 PIN numbers. To avoid incorrect wiring, check with a tester before wiring. Also, disconnect the wiring in a location close to the sensor. The disconnected harness side wiring will not be used, so be sure to insulate it." Wish someone sold a conversion harness to just plug-and-play a Kouki 180sx digital climate control into C33/A31. I'm decent with wiring but feeling kinda lazy about taking this on. Edit: Did some more digging and found a helpful Minkara blog post about the conversion as well: https://minkara.carview.co.jp/userid/1831116/car/1360568/2284209/note.aspx "After installation is complete or the battery is replaced, you need to go into self-diagnosis mode and set the internal air recirculation. The way to do it is to "hold OFF with the key on for more than 5 seconds, set the number to 5, then press 卍→C." ↑↑↑It probably won't make sense unless you actually try it (・∀・)." Lol wtf
    • MBS206
      Skid pans in/around Sydney?

      By MBS206 · Posted

      Maybe SAUNSW could see howany members would do a motorkhana day if Schofield's is still available for a reasonable price...
    • MBS206
      Skid pans in/around Sydney?

      By MBS206 · Posted

      Skip the concrete, we just need to smooth a field. Mark knows how to drive a grader Duncan   I reckon 100x100 flat area for skid pan style, and then some sort tracks for rally... Duncan's already got a rally car on the premises to...
×
×
  • Create New...