Jump to content
SAU Community

Recommended Posts

Hi,

I may have the chance to go to europe for an (hopefully) extended period of time and if so would buy a car, namely a TVR T350c

I would want to bring it back,

Anyone know how bringing in one of these beasts can be done?

Rough costs? Hoops I need to jump thru?

Many thanks for any help and understanding :)

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/
Share on other sites

TVR's are the go for personal imports, no problem to register have done a couple over here. High maintenance car with issues but worth a big dollar over here compared to UK prices.

I have had dealings with the person approved under SEVS as he wanted to import under RAWS which wont happen but learnt a lot about them.

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770107
Share on other sites

Cool, ok so a TVR can be done..

My basic browsing of the standards suggests I have to own the car as an ex pat for 12months?

It would be a personal import and I would be in europe for a while but 12 months is a bit to long to be sure if it is worth investing in the car when I get there

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770192
Share on other sites

Pretty much any car can be done with a personal import. I imagine it's the same procedures required in Japan. DOTARS will need a lot of documentation - you're lucky in that you won't need to have any of it translated. You are only allowed 6 weeks out of country where the car is...any more than that you will need to provide legitimate reasons for, and it gives DOTARS grounds to knock you back.

Once you get it back in Oz, you will have to go through the steps of getting a personal import plate from Victoria, and have a workshop fit it, as well as fixing some minor safety stuff.

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770249
Share on other sites

Ok, so far so good,

Car would be purchaced in the UK before or on arrival, I would tour europe with it and have any work done by TVR specialist before bringing it back, would it be an issue if I moved the car to asia for 6months? It would be with me the whole time is what I am saying I guess

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770259
Share on other sites

No...have you read the DOTARS site yet?

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/importing_vehicles/general/personal_imports.aspx

Particular the links on the right, Eligibility Criteria first:

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/importing_vehicles/general/EligibilityCriteria_2.aspx

Purchase documents will have to be in your name. UK might have a different arrangement to Japan due to being so close to EU, but I doubt you could move it to another country, unless you are just taking it for a weekend to Nurburgring or something. It has to be in the country for 12 months, and so do you (with only a few exceptions).

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770264
Share on other sites

Yep I've browsed the criteria its just I am not 100% sure I can be in the UK for a full 12months,

The way I read the criteria the car needs to be rego'd etc and available to drive but doesnt state it needs to be in the same country for the entire 12months. (As long as it is with me and available to drive?)

Depending on finances I would want to be in the UK/Europe for a minimum of 6 months then Vietnam for 6 months.

I guess I should ring them and clarify, a T350c + 4.3L rebuild will come in at around $40k AU, I dont want to get this wrong lol

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770473
Share on other sites

It's fine to leave the country during the 12 month period. If it's longer than about 10 days, then you'd need to own the car longer to make up for any time spent overseas, but that's only if you don't use the car during that time.

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5771877
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 馃槩 
    • Remember this is 1988 tech.
    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
  • Create New...