Jump to content
SAU Community

Recommended Posts

would i be able to get some advise on what to do with my bov? i just got it installed and its pretty loud, am afraid that it will get the cops attention. i am getting a plumb-back adapter for it, any opinions on that?

thanks!

go back to stock, even stock has a fair bit of noise with a pod/highflow filter

Does anyone have a 250-300rwkw gtst / gtt / gtr in Sydney who could take me for a brief spin in their skyline as I am also contemptlating putting on a hypergear turbo down the track??? I would really appreciate that.

Have a read of the nistune website. It lists a number of WA installers:

http://www.nistune.c...istributors.php

Also read the nistune thread on here.

The panel filters are a common size - falcon, evo etc.

I m using a Pipercross Px-PP1128 for about $100 there are K&N many others.

Use the search button and use Google to ask questions (quite often you will be referred to this website!).

may i ask where u bought ur panel filter from?

and also with my current pod filter, if i remove it and replace it with the panel filter, do i need any other adpaters or parts? cos when i bought the car, it already came with the pod filter, don't have the stock parts.

thanks!

Well I bought mine in Auckland so no use to you. You could order one from one of these Aussie suppliers: http://www.pipercross.net/fastroad/stockists_worldwide.asp?country=AU&id=9

From memory the afm bolts to the box and the hose fits the afm but since you have a pod now its not a priority tbh just look out for the bits at the right price when they come up.

Could I get some opinions on leaving out the bov entirely, covering up the valve and run it full surge back without any bov?

It will be noisy and depending on the turbo it can sound really shit or ok, can always block off your current bov so you know what it will sound like. Just make a gasket out of a coke can for now and see.

Edited by Rolls

dumps are the same according to a tuner I spoke to

neo has a different intake manifold, different sensors, ignition etc but exhaust should be identical

neo only came in the R34 afaik so 99% sure you have one

Edited by Rolls

dumps are the same according to a tuner I spoke to

neo has a different intake manifold, different sensors, ignition etc but exhaust should be identical

neo only came in the R34 afaik so 99% sure you have one

cos im getting one and on ebay they're selling a RB25 one and a RB25DET one. Not sure which one to get.

Cheers!

cos im getting one and on ebay they're selling a RB25 one and a RB25DET one. Not sure which one to get.

Cheers!

odd, ask them to clarify before you buy, see if anyone in here chirps up as well, afaik they were all the same, maybe I'm wrong.

edit: oh right, 34 one is probably going to be different due to exhaust mounting etc, the actual dump flange is the same though.

Edited by Rolls

if you're going to upgrade the Turbo (why not when you can get stock like response but a heap more power) go for the Hypergear SS highflow - around 250rwkw and very similar response to stock. You'll prob need a Z32 AFM, but you MIGHT be able to get away with it. I maxed the resolution at around 240'ish rwkw on my old GTT.

You'll need a GOOD intake pipe made up as well if you switch turbos. The old 'shove a metal pipe in' has it's limits, you'll need something custom made up - DON'T go the silicone options, waste of time. Metal, metal, metal.

Injectors are a much easier deal now-a-days, just grab some Injector Dynamics injectors. Start around the 725cc mark, but i'd prob just get 1000's to allow for E85 :D Or get the 'no-name' variety of Bosch EV12 (i think) style injector, that's what the ID's are based off.

I went nistune, hypergear highflow, stock airbox, stock BOv, highflow panel filter, return flow IC (plus other supporting mods) for bout 5+ years with GTT - never any cops drama's at all. Make sure the exhaust isn't too loud, and following all the great advice already in this thread you'll have a mean car that's still quite stealth. 250rwkw in a GTT is a lot of fun :)

But please please look into your tyres/suspension/brakes as well.

Swaybars, do eeet! Cheap and fantastic handling upgrade - Whiteline.

Tyres, my car liked the KU36's, but alternatively i'd prob splash a few hundred more on some AD08's from tirerack

Brake cylinder stopper, check ebay, very cheap.

Check brakes over, bleed, put some good fluid in etc (RBF600)

But yeah, would be a good idea to check the spring rates if you can. Get some swaybars for sure though! :D

have fun

Both are rubbish imo..the outlet is only 2.5" on those style of dump elbows

Better off with something like this

http://www.skylinesaustralia.com/forums/topic/362300-why-are-my-tyre-marks-so-piss-weak/page__pid__5781686#entry5781686

They also have a stainless one

3" all the way through and bolt straight up to the cat

Both are rubbish imo..the outlet is only 2.5" on those style of dump elbows

Better off with something like this

http://www.skylinesa...86#entry5781686

They also have a stainless one

3" all the way through and bolt straight up to the cat

http://justjap.com/store/product.php?productid=17009&cat=276&page=2

what about this one? it doesn't say 2.5" or 3"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...