Jump to content
SAU Community

Recommended Posts

Hey guys,

I just got defected and it won't pass the inspection unless I have got rid of the gearbox leak.

There was a shit load of oil under the car and I've already replaced the rear seal behind the tailshaft and the shifter seal too. I have cable tied both ends of the shifter seal to seal it even better.

I cleaned up all of the oil and it still appears to be coming from the shifter area. I took it for a 15min drive after cleaning everything and let it cool down, then checked it after a few hours and there was about 4-5 big drops of oil ready to fall from the chassis.

What do you guys suggest I do? Should I just fork out and take it to a gearbox specialist or does anyone have any other suggestions? It's really frustrating me.

I have read it may tend to leak if it's a bit full but I haven't replaced it for months and it's been leaking a while, I doubt it would be still overfull if it was previously.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/361732-r32-leaking-gearbox-oil/
Share on other sites

This thread I came across seems to be a similar problem to what I have.

http://www.gmh-torana.com.au/forums/topic/36631-oil-leak-in-tail-shaft/

I had the tailshaft custom made (1 piece) by someone just like this guy.

It may be the Welch plug that needs replacing?

The thing is, I had it looked at by a gearbox place and they said it will be the welch plug, so I took it back to the place where I got the 1pc tailshaft made up and they said it'd be the rear seal, however I replaced that and it still leaks.

It makes sense now because now I remember it started leaking around that time I had the tailshaft done...

I might drop the tailshaft out and just seal it up temporarily, I really need this fixed for the pits inspection.

It must have moved a bit or something to make it leak, i personally havent seen those plugs leak (not saying they can't tho). Temporary glue i would look at rtv blue or ultra blue. The ultra blue sticks like shit to fur and i use it often in gearboxes as a gasket. Don't use the clear stuff as it doesnt last. Probly clean the area with a good carby/brake cleaner as it dries clean

Cheers mate, yeah I thought it was a bit odd, I haven't seen it happen on any factory nissan parts but being a custom tailshaft might have something to do with it and I can't think of any other place where it would be leaking.

I'll give that a try after the easter period when I can get out to the shops again.

Hey mate, I'm currently sorting the same problem.

Consider:

* Aftermarket tailsahft might have a slightly thinner yoke than the factory one.

I went to a place that sells just oil seals, o-rings etc, gave them the seal, and got one with a smaller inside diameter

(factory is 50 x 35 x 12, I got a 50 x 34 x 11 (12 not available))

I actually had to try a few different sizes, I eventually got one in that size, that had a metal sleeve on the outside, requiring it to be tapped/pressed into the gearbox (this gave it a tigher seal on the inside diameter).

* O-Ring on the speedo drive.

I replaced this as well, the same time as the metal sleeved output seal. Mine was flat, so I got a new one, it was alot harder to slide the drive back into the gearbox.

I couldnt see exactly where the leak was coming from, because soo much oil was leaking out of the gearbox, pretty much everything was drenched (even the exhaust, tunnel, floorpan had oil spilt all over)

Seems to have fixed the problem, whatever it was. But now I got another leak coming from a hairline crack on the gearbox housing :\

K so I took the tailshaft out today and had a bit of a look. Took a pic just to show you the welch plug.

002azo.jpg

I filled the yoke with water to the top and put my hand over the top to put some pressure down on the water and surely enough it started leaking water out of the welch plug. So what I'm going to do is now seal it and hope it's a good enough temporary fix so I can pass the inspection.

Edited by -Jimmy-

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah this was also my suspicion, that pineapples exist to reinforce the OEM bushes because people CBF taking the subframe out to do it. Basically that pineapples and subframe lock collars perform the same intended task. The cup still bolts in under the bush/crush tube.. as to how it'll go I don't know. Two of the bushes at the back look mostly the right shape. The ones up front clearly have the impressions left by the pineapples. Time will tell whether this will work/make any difference. Ideally I would not want any lock collars or pineapples, I'd just want the bush to do the job of the bush. Time will tell if the car works correctly with only the poly bushes in the state they're in. Worth seeing, I think.  What panel work are you looking at? I'm shelving everything from the A pillar forward because it's shit/doesn't function and this was before I drove off at the track and then drove into somebody! A second hand Reo and brackets is $1000, which is just cray when Mr.Hammer turns this piece of metal in regular metal shape.. considering it needs to be drilled to be adapted to the GTR headlight brackets anyway... So I'm all for $0 instead of $2000 (new 34 GTR reo) for the same result lol.
    • I think he's already demonstrated that that's the way he's treating it post the paint jail release.
    • Yep that makes sense, thanks! I guess flogging these turbos in winter is more preferrable lol.
    • Bahahaha, bloody hell Greg. You've got bent and broken things, but instead, you're replacing perfectly good items. This story keeps getting more gregged!   Also, I'd 100% replace that reo if I were in your shoes, unless you panel beater is REALLY good. Even if you put another GTT one on there. Just because you've done so much nice body work lately, I'd say repair the body work fully  If it were more drift car spec, I'd be all "Hit it with a hammer and send it!"
    • There's a fair chance that my bushes are Nismo, because I'm reasonably sure that when asked the question (when putting the subframe into the car in ~2012) "What bushes do you want to run?", I'm pretty sure I would have answered "The stiff ones!". I had to put some silicone grease onto the GKTech inserts I jammed into them last week, because the bushes were quite resistant to having something jammed up their jacksies. So, I reckon you'll be best off doing Nismo + inserts. And, if I'd known you had PU bushes in the subframe AND PU pineapples, I perhaps would have said earlier that that's probably not a good idea. The pineapples are only intended to work with the stock type bushes, because those have a crush tube (which is what makes it end up looking like there is sloppy space in there - but doesn't, because the crush tube does make contact steel to steel) and the pineapples live in the space between the subframe's outer tube and the lower washer/bracket. But the PU bushes don't leave the space in the same way that the stock format ones do, and they do end up fighting for space. Order some bushes and collars and get to it.
×
×
  • Create New...