Jump to content
SAU Community

Recommended Posts

I need some semi slicks in 255x35x18 size to fit my 9.5" rims.

I've got 18x9.5 rims currently with shitty street 255x35x18 tyres, 265's will fit the rear but the front will most likely hit on the upper suspension arm.

What are equivalent semi slicks to the Yokohama A048's that are available in 255/35/18, 245/35/18 or 245/40/18 ?

Thanks

Recovered after Andrew gave your ear the what-for? :D

What rims do you currently have offset wise, that's probably more the issue than tyres.

245 is a bit small for a GTR.

Still some ringing in the right ear :D

I'm looking from a dollar/performance ratio - 265x35x18 A048's delivered are ~$335 ea from www.tirerack.com, I can't justify an extra $200 per tyre to buy a newer model from elsewhere for probably less than a second per lap improvement. I'm running Hankook street tyres now so anything is an improvement.

Current rims have a poor offset - 18x9.5 @ +30mm so the track is too narrow. After some more thought, I think I should do the following:

Buy 9.5" track rims with around +18-22mm offset so the 265x35x18's fit,

Buy a set of R34 GTR rims for street use, since they're 18x9 @ +30mm,

Sell my existing wheels.

Another option for track use, are bolt on spacers safe if I use them on my existing rims?

Cheers

lol very good :D

Well my car was using bolt on spacers and did 2 years of solid track work before i purchased, and it was fine. No issues to speak of and you are talking PI/Sandown so high speed no problems.

I've since taken them off after putting 18's on. So based upon that i think it would be fine.

Or just get some cheap shitter track rims in the right offset. That could easily be done and probably the better overall otherwise you are going to be swapping tyres on rims rather than just rims! (or drive around semis constantly on-street)

RE: tyre choice - ye fair enough. I meant if you were going to spend that amount on those 'other' tyres, you'd be better off buying better ex-US kinda thing on a dollar per dollar basis.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys, Just thought it might be of interest to owners of the RB25 det NEO motor, that awesomeness Nitto are in the late process to produce an engine gasket kit by end of Jan 25.  I think obviously there will be an 25det kit too. cheers, Ian
    • He is around but doesn’t really do automotive stuff anymore, mainly does commercial work now 
    • Shortly after I do the usual full exhaust/ fmic/fuel pump/ R33 turbo and still get flogged at the lights by i30Ns
    • Is Chris from Craved Coatings still around? He is an ex SAU guy and did great powder coating (back in the day at least)
    • Bumping this thread yet again, has anyone ever tried putting yet another vacuum regulating valve on the hose that goes between the turbo inlet? Something local owners have mentioned is the Radium breather pipes de-restrict the valve cover but it actually produces an undesirable outcome in practice, way too much air is sucked out of the crankcase and a ton of oil comes with it as well. As far as I can tell the PCV diaphragm in these modern euro wet sump performance engines is active during boost as well, there's just a check valve to block boost from entering the valve cover and crankcase as there's no inherent check valve function in these diaphragm-type valves. Hopefully I'll be able to try some of this out soon. The Volvo XC90 4.4 V8 has a nice external version of these things.
×
×
  • Create New...