Jump to content
SAU Community

Recommended Posts

Hey fellas,

Had may car in for a tune recently and was told my boost controller wasn't working. (one of the earlier model HKS EVC's).

So obviously I'm looking to get one back in ASAP and was wondering what's the way to go in ways of value/quality without going full on overkill.

In a brief look through the forums I've heard good things about the G-Reddy Profec B Spec II.

Any +1's or opinions on that, or other option would be much appreciated.

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/361961-electronic-boost-controllers/
Share on other sites

Thanks guys, I'll have a look at these links, from forum opinion the G-Reddy Profec B Spec II seems to be the way to go haven't heard a bad word against it, so I'll look into getting myself one.

Thanks again.

Is this too good to be true?

G-Reddy Profec B Spec II - eBay

I would normally never consider buying anything for my car off eBay, but i thought I'd check.

Money's not the issue, but if given the chance I'd think we'd all like to keep some of what we earn.

hey mate,

got my spec 2 from performance wise, they are on the forums here. after my payment cleared it took two days to get to me (from japan too). trackable post and awesome price i cannot reccomend them strongly enough!

mick

I just bought a Gizzmo ms-ibc.. supposedly the goods after doing a bit of searching on this forum.

The world's fastest gts-t runs the same controller, so i thought why not :P

Anyways, mine gets installed and tuned on saturday. Car already has a boost controller but a crappy one so basically looking for boost ramp rate improvements not peak power (which i expect to remain unchaged as it will still run the same boost).

Apexi AVC-R anyone? Ive got one and i find it to be pretty damn cool,.. even better when u know how to use everything on it :thumbsup:

Pricey but got some pretty cool features, cant remember all the shit it can do so i copied this off RHD

Description APEXi AVC-R Boost Controller. This can be used on virtually all turbo vehicles.

Here is what Apexi has to say about their product:

The AVC-R is a digital boost controller that allows the user to modify the boost pressure level on turbocharged vehicles. While there are many boost controllers on the market, none of the other includes as many features as the AVC-R, period. Despite all of the complex features included the unit, the AVC-R is flexible enough to be used by beginners. Entry level users need only to input a desired boost level and the AVC-R's trademark self learning CPU processor does the rest.

The AVC-R also uses a highly durable, fast action solenoid valve to physically control the boost . The valve movement (Boost Duty Cycle) can also be modified. Raising the duty cycle increases boost response, while lowering the duty cycle will slow boost response. This feature allows boost response adjustment for varying turbo sizes. Since larger turbos take longer to spool up ( bad low end response) the duty cycle should be raised under lower RPM's for better response. The opposite should be done for smaller turbo's ( excellent low - mid range response, but limited top end power.) A'PEXi engineers address this issue by including extra menus for RPM based boost control. Drag racers may want to utilize the Gear based boost control function. Aside from the basic functions above, the AVC-R has a Start Duty Setting (allows the boost to momentarily overshoot according to gear).

The AVC-R also includes a Scramble Boost function which allows the user to momentarily raise or lower the boost level at the push of a button. Raising the boost level is commonly used when an extra burst of power is needed (ex. entering a freeway). This feature can also be used in drag racing. The driver can set the main boost level to a low setting for maximum traction then, once full traction is achieved, the scramble boost can allow the vehicle to boost full power.

The AVC-R displays data in three different modes: Numerical, Analog, and Graph. Numerical Mode allows the user to monitor up to four different parameters in numbers and also shows peak hold values on demand. The Analog Mode displays up to two values in an easy to read meter style display. Peak Hold is also included in this function. The Graph Mode offers real time graph plotting with a Ghost map trace feature built in. The graph can replay movement up to 60 seconds.

Unfortunately the apexi avc-r has no gain setting i don't think...losing precious boost ramp rate.

This is the reason i just purchased the gizzmo.. so i can ditch the PFC boost controller kit.

Several years ago dirt_garage did some testing and found switching from the avc-r to a blitz dual solenoid found gains even when running same boost pressure.

The amount of info it can display is handy though!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jamie does know his stuff , you might just want to give them a call and ask - here is their FB page  -  https://www.facebook.com/profile.php/?id=100063506985512 - you will find the number to call them on.
    • Do you think the guys in Penrith are install the E85 Kit?
    • Thanks Pac!   I will reach out to them!
    • Yes, but 2 things of the top of my head, 1. Legalities of nitrous on a street car. 2. No chop chop. I fully understand that there's much cheaper ways to make power, and whilst a wet 50 shot is fairly cheap to install, bottle fills are expensive, and bottles always need to be refilled, and nitrous also has its own inherent issues with reliability, and tuning, from my experience of others using nitrous, it doesn't take alot to lunch a engine real quick if something goes slightly wrong when spraying, if I wanted a big chunk of additional powers, a spooly boy would make alot more sense, disregarding the additional engineering, supporting mods and other logistical issues of sticking a spooly boy on a car that came naturally aspirated from factory  In the end I'm not racing for sheep stations, and I don't really care if people make more power, or are faster than me, or spend less, or more than me, the only thing the car needs to do is drive around and make me smile, which it is doing now Really, I just want a shiny new intake to look at when I'm cleaning the engine bay, and of course, some more induction doorts, and maybe even that 5kw for that elusive 200hp cherry on top that I might get If the FAB9 intake plenum, TB and air filter box thing doesn't eventuate for whatever reason, Plasmaman do one, not as fancy looking, and a fair chunk of more cash is required when including the TB and other bits and pieces that are required to install it, but, it is another option that is available to me if FAB9 one does fall down (but I really, really.....really, want the FAB9 one though) TL;DR. You want what you want
×
×
  • Create New...