Jump to content
SAU Community

Recommended Posts

i rang up redlineperformance today an quoted me $3061 for -5 and $3061for -9 both the same price.cheers for the help guys

Was the -9 price with or without actuators? AFAIK -5 and -7 come with actuators and -9s dont (unless you get the alternative part number which includes them)

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Mrstabby if you dont mine could you write up the list of mods of your GTR.

Im thinking about getting a denso fuel pump http://www.trademe.co.nz/Browse/Listing.aspx?id=371561757 what you guys think ?

tomei type S FPR will be ok ?

You won't need an aftermarket FPR for a GTR as the factory one works really well.

The only reason you might want one is to squeeze a bit more fuel out of injectors rather than upgrading them, but that's about it.

Anything bigger than stock will be enough mate.

You only need a tiny bit more. Hence you could just bump the rail pressure a bit if you wanted to save cash but it *might* not be enough and is probably a good idea to get new ones anyway or at least your existing ones cleaned + fuel pump

Go on Ebay, OS and Nismo twin plates come up all the time for between 500 and 800 (used)

Be warned they might require a rebuild thouhg, but still a good deal since these clutches cost minimum $2000 new.

Hey GTR33NZ check these out http://www.trademe.c...n-371575845.htm

Will i need to replace my coil packs at 300kw ? the head gasket will handle 300kw yea ?

Edited by nitestage32

Mrstabby if you dont mine could you write up the list of mods of your GTR.

Here you go: from the RB26 sticky.

http://www.skylinesaustralia.com/forums/topic/93880-rb26-turbo-upgrade-all-dyno-results/page__view__findpost__p__5137973

Since you've got the 700s use them instead of an FPR. My standard coilpacks are fine with iridiums at 0.8mm.

Depends on what you want and stuff mate.

Nothing wrong with running -9s on a built motor. It'll make a solid 330rwkw, be responsive as all buggery and be an absolute street weapon. So if thats all you want then you'll not need to change turbos!

I've got 370rwkw now with -5s... I'd rather the response of -9s and 330-340rwkw. Admittedly I'm running less boost on the -5s than i could but response is king for a street car and makes it so much nicer to drive.

I don't dislike my -5 setup. However nothing really happens until 150km/h where the -9s were much more exciting between 60-150km/h

+1 on R31nismoid comment...

i had stock engine and changed mine to -9's....i WAS not impressed with my 286kW, but now, after sitting in a gtr with -5's on stock motor, i am proud to say that i made a good choice of getting -9's!!!!!it is so much responsive....

and also thanks to R31nismoid for all the info that you gave me...

I personally think, it is better to start from the begining rather than taking shortcuts to do any mods....take stage's of mod at a time and you will notice the difference....

now i am going to see the difference of stock GTR compare to mine and i will see the difference....

Down side is i just got EPA for exhaust been too loud and i noticed that its gone louder compare to the sound i had when i had stock exhaust....better turbo's i guess...

Stay off ebay man. It's far too dangerous, especially injectors which are important.

Buy reputable brands, from reputable businesses.

I have had rc 550cc for over 5 years now. There fine, big enough / reputable brand in the states. Came with a flow report of each injector in the box, which was good.

But I didn't buy them off ebay, was through a workshop in sydney.

We can source -9's at very competitive prices (Competitive based off all the price info on this thread anyhow!)

Matt

Highly recommend going through matt very competitive prices!!

keep an eye out on the for sale section you may find a good bargain

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...