Jump to content
SAU Community

Recommended Posts

Hey guys,

Just curious how rare and difficult these cars are to obtain. If one were looking for a RX-7 (series 6+) with no major modifications, and in decent condition how difficult would it be to find? Also, how much would one expect to pay. They seem to average around $25,000 here in Australia.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/362101-importing-an-fd-rx-7/
Share on other sites

Ah okay. I was reading through wiki and read that Australia had some RX7s. How do the S7/8 get here then? I thought we couldn't import cars that were Australian delivered.

or sold between certain dates. hence the reason you cannont comply 91 GTRs.

s6 rx7 was sold here. there are a few grey s6 running around but not many.

Kez,

If you are in WA, I will be putting my series 8 on the market in a few months, once my new 370gt gets a little closer to our shores.

Car is basically stock, Cusco Zero 1 Coilovers are the only major mod apart from a panasonic touchscreen Sat Nav/Ipod/DVD player and small amp and sub in the boot, turbo timer and alarm. It is in very good condition mechanically the only issue is the dodgy Mazda paint that they put on is starting to look a little rough around the edges if you look closely. Still has about 2-2.5 years warrenty on it from the Importer i got it from here in WA, send me a pm if you are interested, i havent really thought too much about selling it yet, been more focused on sourcing the 370gt.

I had basically decided to spend $10,000 - $15,000 on it to turn it into the monster that it should have been out of the factory, if Mazda hadnt needed to stick to a budget and make some money on them, but the Missus cant drive it and it does guzzle fuel like a muthaf'er around town. I'm pretty certain that I am going to be pretty devasted once it is gone, the 370gt is going to the a hell of a lot more luxurious but i dont think I will be as confident flicking through round-abouts at 100kph as in the mazda. I used to live in Kalgoorlie and it was great fun seeing v8's try to keep up and dissapearing into the distance as soon as their was any sort of bend in the road. Nothing funier than seeing someone shit themselves in the rear view mirror when they realise than they shouldnt have followed me into a round-about at 100.

Al

Be prepared to rebuild a S8 even if its super clean when you bring it in, I was looking for one before i bought my gtr and just found that after about 60000kms its literally a matter of time before a rebuild due to the seals deteriating. Buying one in aus with a rebuilt motor for a little bit more is a near safer option than buying a good standard one then spending 8-10k on a rebuild. The thing that kills them is the heat, the stock twins are terrible and often blow. Good mods to look for are; aftermarket radiator, metal air/water seperator, V mount intercoolers are also good as they provide better air flow to the radiator than a front mount. These mods provide reliability for the 13b. Dont be scared of buying one but do your research into the rx7, like HEAPS of research, there very different to mod to piston turbo cars.

Yeah I'm aware of the rebuild issue, but my understanding is they're a lot cheaper to rebuild than a piston engine anyway.

I've heard all sort of stories, from people rebuilding them every 20,000ks to people have clocked over 300,000km on their old rotary without an issue.

I understand they have their drawbacks, reliability and fuel consumption being two primary ones, but RX-7 itself is a phenomenal car. They rival Silvia's in weight and balance, yet can compete with the 2JZ in outright power. Plus they look and sound amazing. Damn, I sound like a fanboy already.

Kez,

If you are in WA, I will be putting my series 8 on the market in a few months, once my new 370gt gets a little closer to our shores.

Car is basically stock, Cusco Zero 1 Coilovers are the only major mod apart from a panasonic touchscreen Sat Nav/Ipod/DVD player and small amp and sub in the boot, turbo timer and alarm. It is in very good condition mechanically the only issue is the dodgy Mazda paint that they put on is starting to look a little rough around the edges if you look closely. Still has about 2-2.5 years warrenty on it from the Importer i got it from here in WA, send me a pm if you are interested, i havent really thought too much about selling it yet, been more focused on sourcing the 370gt.

I had basically decided to spend $10,000 - $15,000 on it to turn it into the monster that it should have been out of the factory, if Mazda hadnt needed to stick to a budget and make some money on them, but the Missus cant drive it and it does guzzle fuel like a muthaf'er around town. I'm pretty certain that I am going to be pretty devasted once it is gone, the 370gt is going to the a hell of a lot more luxurious but i dont think I will be as confident flicking through round-abouts at 100kph as in the mazda. I used to live in Kalgoorlie and it was great fun seeing v8's try to keep up and dissapearing into the distance as soon as their was any sort of bend in the road. Nothing funier than seeing someone shit themselves in the rear view mirror when they realise than they shouldnt have followed me into a round-about at 100.

Al

Sounds like an awesome car mate, but I'm in Victoria and not off my P's for a while which is why I'm considering importing as I have time to wait.

Truly epic car. Brought in an S6 about 5 years ago and sold it to a dude from QLD - he flew over one night to check it out, left a deposit and organised a truck to ship it a few days later after sending through a bank cheque. This was a 94 model with just over 40,000km on it, and the engine was fine. Sweet sweet rotary goodness.

Yeah I'm aware of the rebuild issue, but my understanding is they're a lot cheaper to rebuild than a piston engine anyway.

I've heard all sort of stories, from people rebuilding them every 20,000ks to people have clocked over 300,000km on their old rotary without an issue.

I understand they have their drawbacks, reliability and fuel consumption being two primary ones, but RX-7 itself is a phenomenal car. They rival Silvia's in weight and balance, yet can compete with the 2JZ in outright power. Plus they look and sound amazing. Damn, I sound like a fanboy already.

Yes they are cheaper than a piston engine but its still about 8k for someone decent to rebuild them. I did a LOT of research and spoke to many rotary specialists, your honestly better off buying one thats been built with a fresh motor with receipts from a reputable workshop, you will save yourself a lot of time and money. Basically I could get a good stock series 8 for 23-25k (in Aus and imported), I could get a mint Series 8 with a rebuilt motor and bigger turbo for 30k that had 16k worth of receipts for the engine build, turbo upgrade and a lot of the reliability mods such as bigger radiator etc.

Im not trying to turn you off them at all as they are a wicked car (i always wanted a gtr and mine come up at a good price), just research and speak to people that deal with them rather than the stories you have heard, jump on the rotary forums and ask about. I just found anything over 60000kms with a stock motor and it was when it needed a rebuild not if it would need one, the standard seals just let go.

Been considering these lately too...the engine rebuilds are the only thing turning me off them. Such a shame because the engines feel so nice and smooth to rev. Some very nice and clean 2001 examples came up on J-spec a while ago, estimated cost ready to drive on the road was about 21k. They've certainly come down in price since the Australian dollar is doing well against the yen.

yeah they are awesome and yes they are a bit fragile. the turbos on the S8 are actually very good and make an easy 250kw with basic mods. the factory radiator is already V mount of sorts and actually works pretty well. Personally I bought a Series 8 2001 RZ in japan. it had about 30,000kms but engine was already a little tired so I had a full rebuild done on it in japan at a japanese rotary specialist (amazing work, speed and price). it was fantastic. was putting out around 250kw with just a conservative ECU re-tune, little bit of boost and a nice (LOUD!) exhaust. was such a fun car to drive, amazingly well balanced. makes even a hack driver into some kind of drifting virtuoso. I wouldn't hesitate to own one again but it would have to be another RZ (bit hard as they only made 150 of them) or a spirit R (bit easier as they number in the thousands). I sold my RZ for very low 30K range which was a steal. it had an engine with only a handful of km on it, all the original RZ gear (carbon kevlar recaros, BBS wheels, bilstein suspension etc) along with book and receipts for all the work done.

great car but you need to be prepared to spend the money up front to buy a good one, and then spend the money maintaining it and most likely rebuilding it. if you're after a 'bargain' or a 'cheap one' then they are not the car for you. it will just bring heart ache. if you're buying an FD you should be looking at the top end of the market as tha's where the cars worth buying are. or buy a cheaper one and rebuild immediately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My first car was a HG. I'm very familiar with them. A mild cam upgrade is a good idea. The 186 is a very flexible engine - meaning it has good torque from down low. You can give up a little torque down low for quite a lot more excitement in the mid range, and a bit more up top - but they are not exactly a rev monster. You need to upgrade valve springs at the minimum. For a bigger cam, you'd want to make sure it wasn't still running the original fibre cam gear. That would be unlikely, given that most of them shat themselves in the 70s and 80s, but still within the realms of possibility. Metal cam gear required. Carbies are a huge issue. The classic upgrade was always a Holley 350, which works, but is usually pretty bad for fuel consumption. The 186S had a 2 barrel Stromberg on it that was very similar to the one on the 253, and is a reasonable thing if you can find one, and find someone to help you get it set up (which is the same issue with setting up a 350 to work nice). The more classic upgrade was twin sidedraught CD type carbs, or triples of same, or triple Webers. The XU-1 triple Webers being the best example. You can still buy all this stuff new, I think, but it's a lot of coin to drop. And then the people able to set them up are getting fewer and further in between. There's still some, but it used to be everyone's** dad and uncle could do it. **Not everyone's! But a lot. All in all, I wouldn't get too carried away with the engine. Anything you do to it without a full rebuild for power and revs will only make it slightly faster. I am all in favour of a complete teardown rebuild, with nice rods and pistons, 10 or 10.5:1 compression, and a clean port job with at least a big enough cam to run 98 with that compression, if not bigger. And if I did that to a dirty old red motor, I'd want to inject it too, which I'd struggle to fight against the devil on my shoulder that would argue for ITBs and trumpets. But the bills would start to mount up, and it will still never make stupid power. OK, a few people still know how to build absolutely mental red motors, courtesy of the work that went into HQ racing and modern knowledge being applied. But even a 300HP red motor is no match for an RB20 with a TD06. So you have to decide what it's worth to you. I'd just put a set of 6>2>1 extractors, a 2.5" exhaust and an electronic ignition conversion/dizzy on it and just run the old girl like the fairly slow old girl that she really is.
    • Thank you so much for the comments.  This is very interesting and gives me some great ideas to think about. Keen to keep it simple and relatively classic looking. That said, i am not too worried about staying 100% period correct.  A little extra performance and relatively good (or improved) economy is just what i am looking for. Ill be keeping any parts i swap out so if i get nostalgic i can always swap it all back in.  Right now just trying to get some good ideas from people in the know (I still have a lot to learn in this space). Thank you again!  
    • Wrt the engine, you're very much limited by 'production quality' as to how much extra power you can extract from them (I'm talking i6 red-motor) -- a lot here depends on how 'authentic' or 'period correct' you want the modifications to be... ...I'm too old... <grin>...the first true performance engine Holden made, was in the HD/HR models ~ this was the 'X2' performance pack...it came with twin downdraft strombergs on an otherwise unimproved intake manifold, with a two piece exhaust manifold (reckoned to be as good as extractors)... ....these engines were built upon the '179HP' cylinder block, which included extra webbing in the casting to make it stronger and less susceptible to block distortion... The next performance i6 came out with the HK Monaro (also found it's way into the LJ GTR Torana ... the car I wish I hadn't sold)...it had pretty much the same manifold setup, but was built against the '186S' block...this block retained all the extra webbing of the 179HP block, but added a forged steel crankshaft (instead of the stock cast crankshaft), because it was possible to snap the crank... ...apart from the inherent weaknesses in the stock (cast crank) blocks, the next limiting factor is the cylinder head porting & combustion chamber design, and the actual valve sizes. Back in the day, you could buy a 'yella terra' cylinder head (from stage 1 to stage 5 gradients), and this was the way to get serious power out of them -- with the extra breathing of these heads, you could fit a triple SU or DCOE Weber setup... ...obviously, these mods were a waste of time on a stock cylinder head/camshaft grind. My housemate rebuilt the i6 in his VH dunnydore about 6 months back -- this is a 186S block with the 12port 2850 blue motor head and intake/exhaust manifolds, with a dual throat Weber off an XF Falcon mounted on an adapter plate ; it's not a bad makeup...got more torque & fuel economy just light-footing it about on the first throat, but stand on it and it makes more giddy-up than the standard 2850 blue motor that it replaced. Personal note: I'd just fit an RB30 and be done it it 馃槂  
    • Thanks for sharing. That's a great video! My buddy is doing the same thing on his build (S chassis struts and towers). He's building an S14 with billet RB30 shooting for 2000whp... a race car with a TH400 just like this video. For a road car I just couldn't go this route as the strut has to be almost vertical and the caster is not going to pivot correctly (let alone camber gain). You think the R32 frontend is bad, wait till you put a MacPherson strut on without modeling it all in Solidworks to check geometry. I'm not saying it's a bad way to do it but I'd be really curious to see how it affects the geometry.
    • Hey Christof and welcome!  Sounds like an awesome project! I'm not sure many of the regular users on here would know much about the HK but I could be wrong.  Looking forward to updates.
  • Create New...