Jump to content
SAU Community

Recommended Posts

The problem with just changing the resistance...

You still have a 15yo AFM that's most than likely going to fail at some point given just about all of them do.

But new ones and you'll never have to worry about it for another 10-15yrs. AFM issues can often being a major pain in the ass.

Link to comment
https://www.sau.com.au/forums/topic/362121-nismo-afms/#findComment-5779385
Share on other sites

I got mine done by the same people mate, havent installed them or run them yet so comment on how well they work

the way i saw it was

1. I can either go to the trouble to sell my standard ones, buy second hand z32 ones, screw around with plugs etc

2. Buy genuine nismo ones that are more then $1000 dollars as a pair from memory

Or 3 get them cleaned recalibrated and have them still looking stock and able to bolt straight back up to my apexi intake system... remember though ull need to pay for postage to send your standard ones off and get them sent back

cheers

Link to comment
https://www.sau.com.au/forums/topic/362121-nismo-afms/#findComment-5779694
Share on other sites

2. Buy genuine nismo ones that are more then $1000 dollars as a pair from memory

Closer to $750 exchange rate depending

Sell old AFM's for $150 - ~$600 for brand new, high resolution AFM.

Not a bad deal if you ask me. Especially if one of your recalibrated old AFM dies... You are immediately behind in both cost and downtime for the car as you now can't use a stocker AFM to get you out of trouble

Link to comment
https://www.sau.com.au/forums/topic/362121-nismo-afms/#findComment-5779761
Share on other sites

agree with r31nismoid

airflow meters can fail with age and are crucial for engine management operation

i see no reason to skimp on them when you can buy brand spanker new nismo's off the shelf readily avaiable guaranteed

Link to comment
https://www.sau.com.au/forums/topic/362121-nismo-afms/#findComment-5792983
Share on other sites

Haha well that's not very comforting! Lol. May have to look into genuine nismo meters then because these re-callibrated ones are $275 or $295 each (exchange for old ones) so like you said if you can pick up a pair of genuine nismos for around $750, sell old ones for $200 you're paying the same for brand new genuine really

Link to comment
https://www.sau.com.au/forums/topic/362121-nismo-afms/#findComment-5792993
Share on other sites

Go for the NEW Nismo AFM's, i was trying to put off getting them because of the cost.

But really, you have to see the benefits

1 - they fit up as stock (air box, apexi pods, etc)

2 - they're new, so they should last a good 10-15years at least

3 - they allow so much more flow to be reliably measured

My missus WRX had the engine go in it, and it was because it was running stupidly lean because the AFM wasn't reading properly and leaned the mixtures out. it cost her $7,500 for the engine and she still had to get a new AFM. the AFM was a $250 part and because it was stuffed it caused over $7k damage.

the question i asked myself is, do i really want to skimp and save a couple hundred dollars and still effectively run a 20 year old AFM or go for a brand newie and not risk having any major issues caused by the AFM's

Link to comment
https://www.sau.com.au/forums/topic/362121-nismo-afms/#findComment-5793549
Share on other sites

Would go for ecu with map sensors but want to retain factory airbox etc and only looking to achieve around 300kw atw. Probably cheaper to go something like d-jetro and not worry about afm's but Unfortunatly cops up this way don't take kindly to pods or made up airbox"s etc and an R34 gtr kinda stands out on country roads lol.

Link to comment
https://www.sau.com.au/forums/topic/362121-nismo-afms/#findComment-5793761
Share on other sites

You just get drama of a different kind to replace it with.

Nothing isn't without drama.

Like what?

Mine's been on map sensor based ecu's since 2 weeks after I bought it in 2005 and havnt had a problem with map sensors.

Link to comment
https://www.sau.com.au/forums/topic/362121-nismo-afms/#findComment-5793789
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car revs up through the gears much better/faster now, and fuel consumption doesn't really seem to have be affected either on a Hwy cruise, which wasn't expected  The FAB9 intake manifold has been problematic sourcing though, I've contacted Plasmaman to ask about their intake, which you can get different runner lengths spec'd, and, their different options for throttle bodies  The only real physical drawback with the Plasmaman intake is how to connect it to my current OEM style airbox, as FAB9 make a OEM style back half of the airbox to suit the larger diameter throttle body, and all that is required is a 30°bend silicone pipe to mate the throttle body to the airbox Car also goes in for some exhaust work in a week or so to fit the biggest resonator they can fit clearance wise in the front pipe to help remove some of the drone, there isn't alot of realestate under there, a rough guesstimation is it will only be about 3-400mm long and maybe 90-100mm diameter, and with a 60mm exhaust that doesn't leave alot of space for the internal volume of the resonator to do its thing I'm thinking I may need to bin the "high flow" 100 cell cat for something a bit more substantial, yeah, and restrictive, like a 200-400 cell, to help, but, I have ample room for a really large bodied cat to replace the current one which has around a 4" diameter body I may look around in the recycling bins and see if I can find a massive newish cat that was "replaced" with some new full exhaust system that the local exhaust shop in Western Sydney is doing
    • Hahah look at that smile 😂 Just like those ones on IG where they compare the husband in family photos vs husband going fishing lol. I don't think I'll participate this time, clutch isn't in and also the last time I went there were too many numpties on the cruise sessions. Nearly caused a few accidents holding up people and a few guys initiating massive kerb to kerb drifts with heaps of cars right behind them. Not to mention, there were guys on the track session using it as a power cruise session.
    • Is there an actual website thingie for peoples who don't have Facebooks? Cheers
    • All Jap Day is coming up again! 13th of July this year. Are you going? Tickets go on sale on Wednesday 6pm. Please let Quang know as well. https://m.facebook.com/photo.php?fbid=1163155775853542   I still get shit from my wife for this photo because it is the happiest she has ever seen me. And it's not with her, it's in someone else's car.   Quang's EVO is sick, but that rotary wagon flying past was absolutely bonkers.  
×
×
  • Create New...