Jump to content
SAU Community

Recommended Posts

I have told my insurance company everything that isnt stock, that way they have no way of trying to stop paying me in the event of a claim..

Why bother telling em only half or so of the things if they are gonna class it as void anyway...

best to declare everything generally... firstly to make sure its covered when an incident occurs and secondly and more importantly to make sure they cant use it as an escuse to not pay up. Most insurance companies will want to know everything, some may not need to know. But i guess thats where a phone call to your particular insurance company will answer that question. Depending on who your with though.. once you get to a certain level of mods they may not want to insure you anymore... or at least not for a reasonable price any longer, this is where somewhere like just car is helpful.

Do I have to tell the insurance company that I have made these modifications?

That depends on whether you want to be covered in case of an accident.

As per the policy the insurer may void your claim if you have unlisted mods. Especially those that could cause you to have a higher risk of accident, either because of mechanical failure or making the car more powerful (and theoretically harder to handle or more likely to be driving faster). Or make your car more of a theft target since thieves will want those parts. Which is all of them, really.

At any rate, if you don't declare accessories (i.e. non-mechanical stuff) then even if you get paid out they won't factor their value into the payout figure. Because, as far as they're concerned, you never had them.

This is an insurance question,

with the modifications of the following

1. Pod FIlters

2. Z-tube

3. Grounding Kit

4. Plenum Spacers

5. Strut brace

Do I have to tell the insurance company that I have made these modifications?

You should, if you want to claim the modification costs back when the worst possible thing happen to your car. I am not sure if different insurers have different ways to insuring the modified cars.

I am with HBF. When I called them up 2 years ago about insuring my bodykit, etc, they said I can insure up to about AU$8500 (Which is about 25% of the total agreed insured value of my car.).

So looks like I will be changing the insurer when I past AU$8500 mark in modifications, if my policy stays unchange.

Edited by VNS 24

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around without a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
    • Yep, this bit another local owner. I caught it before putting the transmission back into the car, what I noticed was the pressure plate fingers weren't flat and even. It's more obvious with the pull style clutch because the throwout bearing ring was visibly not flat once everything is put together. Nismo should really update their instructions to call out this specific detail. I'm not even sure the clutch as-shipped orients everything properly.
×
×
  • Create New...