Jump to content
SAU Community

Recommended Posts

Lol such hate...

Exempt...

you need to spin the tyres faster for darker lines. Or stay in one spot for longer to leave more rubber on the ground. Try 3rd or 4th gear for more rubber on the ground. In stock form an r32 will hate this... Id reccomend a better clutch and then a bigger turbo and supporting mods.

Softer compound tyres with lower treadwear ratings might also help

have fun and remeber, theres a time and a place. Up the mountain at 3 am is fine but dont go busting huge skids in the shopping mall car park on a thursday arvo...

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

Mate are you just d%^& or what can't you take a hint.

bought mine so i had a decent car to be able to avoid silly little boys who think they can drive.

if ya can't do , save us all the greef.

buy yourself the wheelchair now , leave the rest of us , the tax payer and the light poles alone.

i can bet 99% of skyline owners have done a skid in there car lol, does matter what tyre you have, its heat what causes the rubber to melt and leave the marks, a skid with no wheel speed will just take rubber off and leave no mark, go to a skid pan and practice or at home in your shed, keep it off the roads, im over getting pulled up because the copper hunts skyline because there hoon cars.

pull off the line to the wastegate actuator and enjoy the next week.

OP, this is the key to making darker lines on the road!

More boost = more power = more black marks on the road.

Simple as that!

Remove the wastegate line and go nuts! Nissan only installed a wastegate as an emissions control device, like the carbon canister, it's not really necessary...

pouring a bottle of metho in the tank helps as well

Who the f**k doesn't lay the occasional snakey???

You must all have baby seats in your skylines ay.

yes i do have a baby seat, how did you know..

Oh and it will lay a way better snakey than yours too but I prefer not to ruin my car for your amusement....

EDIT..actually my work ute would lay a way better snakey than your car, man you really are a loser..

LOL so much hate, poor guy lol

Ask a stupid question, Get a stupid answer lol simple as that

I dont do static burnouts, I snapped a halfshaft last time I did one (which was the first one I'd done in ages anyway) so no I rarely do them

I find it more enjoyable when the car grips and takes off quick and drives nicely rather then sitting with my bogan friends comparing black marks.....

Eat heaps of vindaloo currys and a box of laxatives and wait 30minutes then go do skid marks galore :thumbsup:

Lol I don't think they are the sort if skid marks you can be proud of and show your friends... Then again it depends on who your friends are

I don't have a problem with burnouts, each to their own in that department, but the cops/law do have a problem with it...and every twit they catch doing burnouts on the street in a Skyline is another step back for Jap car enthusiasts who don't want the negative cop attention / the canary.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...