Jump to content
SAU Community

2008 Holden Ssv Ute Swap For Turbo Skyline.

DJMannix
 Share

Recommended Posts

DJMannix Enthusiast

DJMannix

Posted
Posted

Hey guys, just wondering if anyone would be interested in swapping their turbo skyline( preferably a r33 ) for my 2008 Holden ssv ute.

It's black and has 115000 k's. Runs incredible not a proem with it. Reason is a little tight for money and can't really afford to keep it so want a skyline and a daily driver instead.

Any cars will be concidered :) cheers

Link to comment
Share on other sites
DJMannix Enthusiast

DJMannix

Posted
  • Author
Posted

You wanna swap on 08 ssv ute for a skyline without a cash adjustment on top? how does this make you any less tight for money? Surely a skyline would cost similar if not more to upkeep then your ute?

Actually yes your right really should have put that in there! Definatly cash my way if it's needed. And it depends how your drive it really. Ve as will sit at about 16L/100k's.

And most lightly modified skylines I would imagine would be be between 11 and 12L/100k's. But I do want to work on my cars so skylines are easier and cheaper to do so cause there is heaps out there :)

Cheers

Link to comment
Share on other sites
  • 3 weeks later...
DJMannix Enthusiast

DJMannix

Posted
  • Author
Posted

What about an Evo 7 with a Tomei 2.3ltr engine, RS gearbox, HKS 3037S turbo kit, HKS IC, HKS Oil cooler,

Haltech PS1000, Evo 9 rear bar, tail lights and wing, E9 headlights, e9 interior.

The list goes on.

Makes 316kw atw on pump fuel with plenty more there if you want.

How much would you be asking for the evo? Pm me.

Link to comment
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      There is a LOT of stuff that can be done, it all depends on how much time and money you want to spend on doing in.  Not all ECUs will be able to do it, and the more control you need the more time and knowledge needs to be put into making it work.  If you're willing to spend the time and money and have the right hardware and skills involved there's a lot that can be done. 
    • thx78
      Boost level and torque curve

      By thx78 · Posted

      I am impressed with all this level of adjustment. I didn't expect all this possibility
    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      Correct.  In the case of the 500kw dyno plot I showed you the car actually runs two boost control solenoids for boost control and a 5psi wastegate spring.  It allows me to control how much boost pressure is applied to both sides of the wastegate valve at any point and fairly accurately control boost target as a result. I've tuned it so that it's able to target anywhere from 5psi to 25psi depending on what's needed.  The target tables I've set up in that car are Gear vs RPM, so every gear has potential for a different boost (and torque) curve.   First and second gear have quite low boost targets, third gear actually has different target boost all the way through the rpm range as it's a stock RB25 gearbox - the boost targets have been chosen to maintain a peak of 600nm (what the owner has set as the maximum torque he's happy with putting through the stock 3rd gear) but it carries that to the rev limiter.   The boost curve to achieve that is something of a ramp up, then hold, then ramp up again and the power curve looks more like a flat line haha.  
    • thx78
      Boost level and torque curve

      By thx78 · Posted

      so you can decrease or increase the boost depending on the diet as you wish?     by acting on the wastegate?
    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      That's torque and power, it's all from a single run.  The boost curve is "held back" from it's peak target in the 3500rpm to 5000rpm range from memory, so it ramps hard to something like 18psi then climbs more progressively to 23psi nearer 5000rpm.   It makes the torque (and power) ramp more "natural" and less hard on parts and traction, it doesn't feel artificially held back.   
×
×
  • Create New...