Jump to content
SAU Community

Recommended Posts

How would XR6's be legal then? :mellow:

because they are an australian car brah.

or maybe, just maybe, it is because the restrictions are based off power to weight ratios (or just outright power in some states), the target value being under about 120kw/ton. the 350gt comes in well over this number since it's power output is 206kw (compared to the falcon's 195kw) and it weighs about 300kg less than the 1700kg falcon (based of the FG which comes in at 114kw/ton - the highest for any natro 6 cylinder falcon). in qld though the car must be under 200kw (plus non turbo, etc). this actually rules out the sv6 commodore, since it has 210kw, although it is right on the limit for some other states using the power to weight ratio rule.

  • Replies 165
  • Created
  • Last Reply

Top Posters In This Topic

Well NSW has the restrictions:

NO turbo

NO 8 cylinders or more

plus the following 6 cylinder vehicles

  • BMW M and M3.
  • Honda NSX.
  • Nissan 350Z and 370Z (including private or 'grey' import variants eg. Infiniti G35, Infiniti G37, Skyline 350GT (V35), Skyline 370GT (V36)).
  • All Porsches from 1994 models onwards (except diesel).
  • Mercedes Benz SLK350.

if you do the calculations you will find that pretty much all cars have a power to weight ratio of higher than 120kw/ton (which is what the old rule used to be. obviously they decided to change it to a simple list of restricted cars to stop people complaining because they put their car on the dyno and it made less than 120kw at the wheels so they should be able to drive it.

The smartest thing to do is rip all the things that contribute to the heavy weight of the vehicle. I mean, take out the sound-deadening, carpets, spare wheel. Remove the air-con unit, take all the glass out and just have nothing. Take the wheels and engine out of the car too and it will probably be faster than it was before.

actually fg xr6 goes really hard. my friend has one (auto), it completely demolished my NA R34 from second gear onwards after i dropped the clutch in 1st gear.

What do you expect? You're comparing a milk bottle to a wine cask.

Also, the XR6 is a family car. I'd buy one to tow my 32 to the drifts and take my grandmother out to lunch in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey to anyone that reads this, long time lurker first time posting, sorry if it’s been answered before but I’ve been looking for nearly a year now for answers. ive got a 25det neo in an r32 that works awesome when it works (made 500whp on 21psi) but works 45% of the time, 1st issue there’s a harness that runs under the passengers side front fender that my tire keeps rubbing through and one wire seems to power the fuel pump even though I’ve done the relay “mod” some people like to call it, and when it does rub through it kills the car, yes next time I’m with the car I want to take the fender off and try tuck the harness well out of the way but I’d also like to try and by pass this mysterious wire as well lol, also wouldn’t mind getting power from the alternator as I’ve read it supplies the pump with 13v ? But no idea where to run the power wire too. 2nd issue, when replacing my fuel pump and fuel hanger I managed to break the factory fuel level sender leaving me with no fuel gauge, I’d like to buy the fpg fuel level sender for r32/s13 but the plug it comes with confuses me, I’ve got a detschwerks x1 fuel hanger which has light + pump - level + pump + and a ground, I’m no auto sparky but I’m wondering if I can cut the plug off the fuel level sender and wire the negative to the pump negative and wire the positive to the level positive to get a fuel gauge back ?🥴 3rd and final issue, the reason I want a fuel gauge is because whenever it’s below half a tank, it fuel starves like crazy and runs like a bag of shit even without doing a pull or sloshing the fuel round in the tank, I’d also like to fix this but have no idea what’s causing it, I’ve got a dw420 and a dead head fuel setup meaning the fuel is regulated before it gets to the engine, my only theory is that the return line is to close to the pickup on the pump and when it’s at half a tank the return line is causing the pump to cavitate enough to cause fuel pressure issues, that or the pump isn’t low enough in the tank which I would find strange considering I can’t find a single thing online about it, also if ya wondering how I figured out it happens at half a tank without a fuel gauge, I waited until it started happening and went and filled up and the car took exactly 30 litres every time I tested it, if ya managed to read through this mess I appreciate that and any recommendations , cheers
    • ChatGPT is trash and lies about things I would not expect it to lie about considering many things it's wrong about are very easily verified with google. The S3 R33 GTR shares its steering wheel with R33 GTSTs of the same production year. Part number is 48430-26U17. I'm guessing you have to get it from a car that came with HICAS though, the ER33 is 48430-26U18, but the HR33 diagrams note that part number is still leather vs 48430-26U13 which is not leather-wrapped. They all use the same airbags, so if you need another one you can get it off basically any same year R33 or Stagea.
    • I'm going to run hard lines front to back in the future. That should help dissipate a bit more heat. If not, a fuel cooler might be next 
    • No. The mark is with respect to the cam rotation. None of those things have altered it. When stationary, the cam position stays in sync with the crank position. It doesn't matter if you moved the head 4 feet up. Hence, that mark needs to stay exactly where it is.  
    • Toasty! I was around the same. Around 50 but with a fuel cooler. Got my tuner to dial down the pumps and its so much better.. i think last time I drove it was around 35-40 during summer. PWM makes a huge diff. I have the 1 PWM controller running my feeds.
×
×
  • Create New...