Rb20Det Missing On Boost Help?

[andyyyyyyyyyyyyyyyyy]

hey, i got a problem with my rb20det when you are about to come on full boost it starts missing and not running right, and from a stand still when u put the foot down it dose the same thing, starts missing, but if u ease the power on gently and stay under 3k it is happy and runs fine??? can anyone help

[TJR32GTS-T]

Superspark igniter

Check for cracks in coilpacks

Check plugs/connections

Clean afm 

Check cooler piping

02 sencer

Fuel pump

Leaking injector

Crank angle sensor

Fuel filter

Just to name a few.

What mods do u have?

And if you search thru the forum this has been covered before,

Cheers - trent

[andyyyyyyyyyyyyyyyyy]

Superspark igniter

Check for cracks in coilpacks

Check plugs/connections

Clean afm

Check cooler piping

02 sencer

Fuel pump

Leaking injector

Crank angle sensor

Fuel filter

Just to name a few.

What mods do u have?

And if you search thru the forum this has been covered before,

Cheers - trent

ok ive changed the plugs, inspected the coilpacks, tightened all the hoses, i just had the 02 sencer wired up by a shop so hopefully that was done right, injectors dont seem to be leaking............ how do u know if the fuel pump is not working? and not sure about where the afm is? and yer i have looked through the forms just cant find anythink thats like mine...

[TJR32GTS-T]

The afm is inbetween the turbo and the pod/airbox

You can buy afm cleaner or cleaner specifically for electronics from autobahn/supercheap and the like,

Not to sure about the fuel pump, I know when mine was on the way out it was whigning and carrying on,

Sometimes u can't see the cracks in the coilplacks, either wrap them in good quality electrical tape or a better option is heatproof silicon.hope this helps

-Trent

[Rb1skyline]

Had the same thing happening with my R33 rb25det It was fixed by putting in new coil pack's. My coils had no crack's in them and didn't look to bad but due to old age they just got worn out.

[battery]

coilpacks.... you can't tell if they are faulty by "inspecting"