Jump to content
SAU Community

Recommended Posts

hey guys just thought i would pass on a little info to help out people deciding on buying second hand pop out dvd players/car audio units instead of new.

i bought it second hand off a forum member for what i thought was a bargin 300ish dollars. lasted a good year-year and half with no dramas.

i recently have been experiencing problems with it, the screen would not function sometimes coming out when the button pressed other times not moving or only coming out half way then pausing. I eventually took it to a car audio place to find out the mechanism was gone and neded to be replaced. payed the $80 standard fee to have it sent away and looked at thinking it might cost me 100 or so dollars to fix it. got the call from the guys to find out just to replace parts in the screen and nothing else was going to cost $850 obviously this was >_<>_<>_< (due to the parts not being easily available anymore.)

when you factor in a brand new one with more applications cost less.

even the guy at the car audio place said to me it was pretty outrageous. so while buying a second hand dvd player/unit is great for the cheaper price just be weary of the replacement cost if the pop out screen mechanism fails which is going to be an arm and a leg

yt

And you generally get a year warranty with a new one....so lasting a year and half second hand plus the previous usage isnt that bad at all, even if you got new it would be out of warranty.

Also if your buying something that has a lot more mechanical moving parts like a pop out screen you would expect more issues as time goes on and hand in hand is the cost to fix it.

Its bad luck you have to get a new one, but there really wasnt much point to this thread.

Bought one New about 2 weeks ago off a 31 forum member, wired it all up.. and no display on the screen, tried wiring the H.brake ground to the chassis, batt, and H.brake.. still nothing.

also it didnt accept CDs for a few mins. bit annoying as i have been trying to contact him and getting no reply.. tho he is on just about everyday. im not saying its his fault, but im sure if i buy something new it should work.

And you generally get a year warranty with a new one....so lasting a year and half second hand plus the previous usage isnt that bad at all, even if you got new it would be out of warranty.

Also if your buying something that has a lot more mechanical moving parts like a pop out screen you would expect more issues as time goes on and hand in hand is the cost to fix it.

Its bad luck you have to get a new one, but there really wasnt much point to this thread.

depends on where you go and what you get in terms of warranty. i am not saying that i didnt get my money's worth, i believe i did but getting it fixed is a whole different story, if this advice was here for me to read at least i would have had the knowledge to choose. if it helps one person make a better decision than in my opinion it is worth it

depends on where you go and what you get in terms of warranty. i am not saying that i didnt get my money's worth, i believe i did but getting it fixed is a whole different story, if this advice was here for me to read at least i would have had the knowledge to choose. if it helps one person make a better decision than in my opinion it is worth it

mosr radios arent worth fixing, unless its a easy fix, the cost of radios has fallen so much and so many new features its not worth fixing old junk, imo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks Duncan! Yeah it's street use for me only. Maybe occasional track day. Any difference in noise when running with the two pumps? I would expect the lift pump to be more quiet than the main pump so hopefully not? And yes, unfortunately quite a big price difference to the simple hanger setup. Though I'm usually willing to trade money for better reliability and future-proofing. Buy once, cry once and all that. I'd be very happy to never have to deal with fuel pump / wiring issues again  
    • The old manifold was quite under the GTR strut brace.  The new manifold is quite [unknown] the GTR strut brace. The GTR strut brace was needed to clear the bonnet vents. The Old strut brace will almost certainly clear the new manifold, but not the bonnet vents. The old strut brace will almost certainly clear the new manifold, and the new bonnet without vents. But I am hoping the GTR strut brace clears the new manifold :p
    • On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
×
×
  • Create New...