Jump to content
SAU Community

Recommended Posts

Ive got a C4 auto in my R33 and just want to know what others see on the temp gauge. I dont have one as yet but will order one soon. I have a good size cooler at the moment but dont want to have issues with the auto getting to hot.

What size cooler cores are people running with modified autos...?

Is anyone running a thermo fan to help cooling..?

Also for people running a C4, what have you done to get the speedo to work correct..?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/362844-trans-fluid-temp/
Share on other sites

Below is a chart showing how long your trans will last at different temps (its a US chart so in fahrenheit). It is recommended that you keep atf temps below 80deg centigrade (or say 180 fahr). I had the biggest a/market trans cooler on my Stagea when it was auto but ideally you would have it thermostatically controlled just like an engine oil cooler. You should still run it through the heat exchanger in your radiator to assist in bringing it up to optimum operating temps asap.

heatchrt.jpg

Below is a chart showing how long your trans will last at different temps (its a US chart so in fahrenheit). It is recommended that you keep atf temps below 80deg centigrade (or say 180 fahr). I had the biggest a/market trans cooler on my Stagea when it was auto but ideally you would have it thermostatically controlled just like an engine oil cooler. You should still run it through the heat exchanger in your radiator to assist in bringing it up to optimum operating temps asap.

I have the biggest after market cooler I could get. My car was originally manual so dont have the heat exchanger in the radiator. Where could I find a thermostat kit for the auto..?

I have seen that chart on the protrans site that the auto came from. Im just worried that it will over heat and not have the volume of fluid to keep the auto cool.

Did you have a temp gauge and if so what were cruising temps compared to giving it a hard time..?

No sorry - never had a temp gauge on it. Did a few track days and water temp was never an issue but then went manual.

You could get one of these (I have one for my oil cooler) but may be overkill for atf :

http://www.earls.co.uk/earls/coolers/components/thermostats.html

If you use a good quality synthetic atf maybe just fit the gauge and see how it goes.

i run transcooler from RX7FD built in thermostat,

post-36964-0-55517100-1304501321_thumb.jpg

post-36964-0-90083900-1304502565_thumb.jpg

would look at Derale coolers kits ae good gear,

http://www.summitrac...nk%7cAsc&page=4,

http://www.summitrac...13960/?rtype=10,

http://www.summitrac...arts/DER-15850/,

Good luck with your search,

If you use a good quality synthetic atf maybe just fit the gauge and see how it goes.

+1 Full synth will tolerate higher temperatures than regular fluid. You should be able to get the specs from the manufacturers websites.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...