Jump to content
SAU Community

R33 Gtr Injectors And Aftermarket Intercooler.

GODZ1LLA
 Share

Recommended Posts

GODZ1LLA Proficient

GODZ1LLA

Posted
Posted (edited)

As title got this cooler (made by x racing) when i bought my car, but i doubt i will be using it. size is 780x295x75 with 3" outlets. it is brand new and never been used

$175.

Injectors i have 11 of them, one was leaking so i threw it.

I needed an in jector for my car, but because i am in patient i ordered 2 sets now they are here i only need one set lol

All have been on my car and tested, only one of them out of the 11 weeps very very slightly (new seal will cure that one). some need the seals also.

Anyway $25 each :)

Piccys...

piccys010.jpg

piccys011.jpg

Edited by GODZ1LLA
GODZ1LLA Proficient

GODZ1LLA

Posted
  • Author
Posted

The same place you sent the coilpacks too the other day i bought off ya :)

But for everyone else, same as my profile says...

Western australia in Bunbury :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Fixing exhaust position?

      By Kinkstaah · Posted

      I'd want an even MORE side on view. More or less you want to make sure the outlet is actually square with the outermost part of the bumper. Or you end up getting soot all over your bumper from your hektik exhaust. In any case, it looks pretty close. I think the way to fix this is probably more of an overhaul at an exhaust specialty shop if you want tips that are rounded off or sit nicely with the bumper but have proper clearance and don't move - Probably more of a redesign than a quick fix. I've pencilled in my own exhaust with its own various problems, pinholes, PITA fitment, and other issues and can see myself going to a shop and saying "JUST DO THIS BUT BETTER?"  Which is gonna work better than any more small fixes. I'm gonna chime in here officially with "from an outsider perspective this exhaust looks fine so this is self OCD probably" (which I also suffer from)
    • joshuaho96
      RB25DET Engine Oil Dipstick Length

      By joshuaho96 · Posted

      Reminds me I really need to install that HKS oil cooler I bought years ago.
    • GTSBoy
      RB25DET Engine Oil Dipstick Length

      By GTSBoy · Posted

      It be 40°C outside lately. 10W60 is a good idea here. Well, certainly 10W50.
    • PranK
      Fixing exhaust position?

      By PranK · Posted

      Here are some side on's.
    • joshuaho96
      RB25DET Engine Oil Dipstick Length

      By joshuaho96 · Posted

      I just did an oil change on my daily which used oil that is probably 2-3 years old. Normally I try to follow exact viscosities, but my LS400 is fairly tolerant. Dumped something like half a quart of 0W30 Mobil1 ESP X2 in there, followed by 2 quarts Pennzoil 5W30, followed by ~1.2 quarts of liquimoly 5W30 LL04 spec oil. Then the rest was QS euro 5W40 which is actually so thin it's basically a 30 weight oil. All this is to say it doesn't matter that much. We aren't talking about brake fluid. For an RB I would recommend a high ZDDP oil because it doesn't use rollers in the interface between the cam and valve, but a 5W30 or 5W40 is fine to use for street use. The 10W60 guidance really only applies if you're getting it hot and pushing the engine hard.
×
×
  • Create New...