Jump to content
SAU Community

Recommended Posts

Hi,

New to here (get drag to here by ONARUN), just say "HELLO" to all of you!! :)

I know nothing about stereo, however want to install a JVC MP3 head unit in my R33 (at moment all stock stereo and speakers), but at moment I feel the sound mostly comes from back. I'm wondering should I get a new set of front speakers somrthing like 6.5", a bit more power split into front or...whatever is more ideal you think..

Link to comment
https://www.sau.com.au/forums/topic/363-will-65-splits-fit-into-r33-front/
Share on other sites

  • 2 weeks later...

If u want really clear quality sound from the front i recommend u get splits, they will set u back about $300 for kenwood splits, the great thing about spilts is that is a 2 way speaker which is split in 2 , one goes in the door and the other a tiny little tweeter sits on the dash somewhere or where ever else u decide to put, it the sound is crystal clear and it sounds as if the singer is actually by ur side singing in ur ear.

At the back either 3 way speakers or you go splits again and then of course a Sub 12" probaly in the boot for the base. And u should great sound

Guest [ryan]

I reccomend you do not get Sony or Kenwood splits. If 6" splits do not fit in the stock locations you can easily make them fit by making door pods. When installing them i suggest you put a MDF ring around the hole before screwing the speaker in. Door pods would be the best for Sound Quality as you can make them on an angle to face the speaker towards you. I suggest you save a bit more and spend at least $500+ on front speakers and an amp for them, you will thank me later :)

Hi,

I have a set of MB Quart 6.5" splits in the front doors. The mids fit perfectly into the stock locations, and I have the tweeters on the sails next to the side mirrors. Sounds awsome....

Brett[/quote:c98b0df73f]

Sorry, let me ask a stupid question; what's brand name of MB Quart? thanks!!

Guest [ryan]

I've heard alot of splits

Alot side by side

and alot in fully tuned SQ sysetms

i am talking 50 channels per speaker is how fine tuned they are

and i can honestly say

If you are in the market for splits around the $1k mark, Boston Pro 2-ways are the definate way to go. Focal Utopias are OK, overrated though. Dynaudio System 260 and 360 are also very sweet, but the Bostons are slightly better.

Mb Quarts are good, But i would not call them the best. They sound sweet, tweeters are a bit harsh tho. A thing you will like about the boston pros is that they can absoloutely scream with about 40wrms going into them, and not lose a single bit of quality at high volume. Although they can go very loud and sound very good with only 40wrms i would reccomend at least 90wrms going into them.

Usually it will just come down to user preference. You're probrably not a SQ junkie like i, so none of the things i mentioned above will matter to you much.

MB Quarts are great quality, but do not sound the best.

Cheers

Ryan

  • 4 weeks later...

Splits are the go, for sure. Everyone's made some good suggestions here, but it depends on a few main things:

* Are you gonna run them straight off the head unit? If you have a high power unit you should be able to get away with this, but look for a speaker with high sensitivity (i.e. good efficiency so that the speaker runs loudly AND efficiently from the small amount of power a head unit pushes out, compared to the amount an amp puts out). Remember that the power ratings on a deck are almost always measured in PMPO (Peak Music Power Output - the amount of power that is able to be pushed out in small bursts, and usually with at least some distortion) which is far less accurate than an amp's power output when measured in RMS (Root Mean Square - the amount of power that is CONSTANTLY being produced with minimal distortion). If you're using an amp to run your speakers, then you can sacrifice efficiency a bit to get better sound and build quality in exchange.

If you're gonna be running your speakers directly off the deck at high volume levels, there's a good chance that they'll be distorting and will therefore be damaged a lot more easily. :D

* The most important thing: do the speakers you sample sound good to YOU? Everyone's ears and tastes are different, so only YOU can decide if YOU like the way a speaker sounds. (When you hear some speakers you like, but are still shopping around, get EXACT model numbers so you can compare apples with apples.) After all, they're going in YOUR car, and primarily for YOUR enjoyment. If you like the sound of the speaker(s) you've sampled, then you can decide on the next point.

* How much do you wanna spend? Ryan suggested some nice gear, but if you're on a budget these may not suit you (then again they might - some people are lucky enough to be able to spend $250,000 on a pair of speakers for their living room, along with their $25,000 CD player, $30,000 amplifier/receiver and another $30,000 on their plasma TV or projector and screen. I wish I had these options!!!). You never know, you might end up being happy with a pair of ReSponse speakers from JayCar.

Set yourself a budget and work around that.

MB Quart's and Boston's are nice, I have never heard Dynaudio's so I can't comment. Focals: a lot of specialist home and studio speaker manufacturers use Focal drivers in their gear, so that should give you some indication on how highly their products are regarded...

Focal? Overrated?

Hmmm.... someone wants to get into a debate.....

Seriously though, I will sound like a broken record... but go the splits and a decent amplifier. If you spend a little time setting them up, you can get surprisingly good bass response from them. And unlike most systems, which have "thump and scream" tendencies, a good set of splits will really fill the car with loud clear sound that doesn't become fatiguing to the ears.

Anyway, my personal faves are the Focal range. Utopia are awesome (the World IASCA Champion used focal) and the PolyKevlar are awesome too. Bostons are sweet, Dynaudio phenomonal. If you want good sound quality at a lower price, from my experience the lower Focal range is awesome value for money. Polyflex splits are about $350 and in a comparison, beat the top of the line Sony, Alpine and JL audio....

Bottom line, go somewhere where you can hear them, and have a listen yourself. Best test there is. It is your sound, so make sure you pick something you like....

Cheers,

Slaz....:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I just got to work and skimmed through 61508 and 61511. I was surprised the CSA adopted both, but neither are enforced. To recap what I read, it states that in a perfect world, they should be segregated but they acknowledge that this is not industry standard and clearly mention that they allow mixing of safety and non-safety. 61511 also mentions software segregation like AB does in their safety PLC's.   Now if only I could go back to control, let alone safety over comms. In my current line of work, we're only allowed monitoring and basic control over comms. Everything critical must still be hard wired as much as possible. 
    • I've unfortunately never been as they're on the complete other side of the continent and another country that isn't currently letting us in as easily as they use to. I even heard their stop signs over there actually say "Stop" instead of "Arret". If I decided to trek the 48h drive, I wouldn't know when or where to stop haha. Whenever I order parts from UP Garage, I order from Japan as it's cheaper. Same with GKTech... oddly enough, it's cheaper shipped from Australia then it is the US.  UP Garage Japan operates their US leg though, unlike Tomei. If Tomei JPN had the power to close down Tomei USA, I'm sure it would be done in a day. They're two completely separate entities. Tomei JPN messed up somewhere originally agreeing to its creation and got sacked big time. 
    • I asked someone about this and he told me about the Audi 1.8T engine. But I think it would be difficult to swap
    • I don't know that machine specifically, but I'd personally go for something with a little more kick than 130amp. Around up to 180 would be good. At the 6mm range, you're really pushing the machine hard and don't have a long period you can run for with out needing to give it a rest. Lots of MIG machines come with a regulator and hose. A lot will come with a starter roll of wire too, but it isn't too expensive to buy. I'd recommend NOT buying a massive roll too, as you don't want it sitting around FOREVER in the machine between uses and potentially going to shit. For thin sheet metal, get a roll of 0.6mm if you're doing over 3mm and above, switch over to 0.8mm wire. Even by 2mm you'd probably really want to switch. As for gas battle, it's all swap and go style now. You'll pay a bottle deposit, and then X amount to swap for a full one. I think it's like $200 or $300 for a D Size bottle upfront as "deposit", and like $110 to $150 per swap. My D size CO2/argon bottle lasts a fair bit of welding on the MIG. And I run an E size bottle on the TIG. For DIY MIG, stick with a D size bottle. If you really start to get into a LOT of welding and doing it really regularly, then upgrade. If you're like most DIY car guys, one D bottle will last you 2 or 3 years easily. I think I've been on my current bottle about 5 years. It is starting to get low, but I've been smashing it a lot more the last 6 months.
    • SR20s came with cars like the Bluebird and Primera, but the RB20 never came. The ones in Turkey were either brought in specially or from abroad. That's why RBs aren't as common as SRs. And if a part breaks or I need to replace it when doing maintenance, it's harder to find parts for RBs.
×
×
  • Create New...