Jump to content
SAU Community

Recommended Posts

Hey guys, wondering if anyone has got a way of securing external mods (body kits ect.) against theft.

I picked up my r33 last night And sadly the only parking I have is open set. Anyway got woken up at 4am by someone from my apartment block saying he scared off 4 guys in black hoodies around the wheels of my new car!!

Upon inspection sure enough the pricks undid about 3 screws from my gtr sideskirt and broke the sealant away from the body!

Not a good first night of skyline ownership for me.

My point being, does anyone have any method of making their bodykit for lack of a better word un-removable??

Urgent help!! I am keeping it locked up at work tonight but I need a quickfix!

Cheers guys

Not a good idea to make body parts unremovable. Get a good alarm system that has level sensors that will set off the alarm if the car is jacked up. Better to wake up your whole neighborhood then to have your shit stolen.

Could also try hiding what type of car it is by getting a car blanket, bit tedious taking it on and off everyday so guess it depends on how motivated you are to stop them.

Could also try hiding what type of car it is by getting a car blanket, bit tedious taking it on and off everyday so guess it depends on how motivated you are to stop them.

Whenever I see car's with blankets over them I was always go "hrmmm what's under there" :turned: There going to look under it regardless I would think.

Just get a good alarm system and a sniper.

Well they didn't jack it up so what in thinkin is puttin hex screws in, getting two perfect lengths of chain and padlocking then around the whole car just near the wheels and then putting a cover over it?

Yeh it's gunna be hell tedious getting in to my car every morning and lockin up with protecting the paintwork from the chain but hopefully they won't be able to get the skirts.. At least until I find a new place with a proper garage

There are a few ways to deter a thief, but as above, if the c***s want something badly enough... sad.gif

1. Regarding the body kit. You could try a good sikaflex/urethane and the "one-way" screws that you can buy for number plates, problem being if you ever want to remove any part of the kit, you'd have to cut it off to remove the "glue", and there's an increased risk of it being broken and left on the car if they have another dig at it.

2. Security nuts, providing they're the type that use an INTERNAL socket, not external (ie. a pattern on the inside and round on the outer, so that no-one can just hammer a plain socket on) are a good idea to help protect your wheels. And don't chuck the socket to un-do them in the glovebox as it defies the point, attach it to your keys where possible. But again, it'll raise the risk of someone breaking in or breaking a window to find the socket.

3. As above, a decent alarm with shock/level sensors will help.

Yeh had the idea kinda like the siklaflex one, maybe drilling the heads of the screws so they are bured out to not work then slapping some bog over them to kinda hide the position, n if I do need to take it off one day just crack the bog away and drill out the screws?

I like the idea of one way screws however...

It was in yokine ahh33, I'm surprised at how quick they were to pick up on it bein there as it was the first night of having it

Its parked right next to the apartment block and the shelter has a normal light right above our car space so I dunno if itd deter them, had an idea for a security camera looking on it though.. Alot of work running cables ect. :s

There are a few ways to deter a thief, but as above, if the c***s want something badly enough... sad.gif

1. Regarding the body kit. You could try a good sikaflex/urethane and the "one-way" screws that you can buy for number plates, problem being if you ever want to remove any part of the kit, you'd have to cut it off to remove the "glue", and there's an increased risk of it being broken and left on the car if they have another dig at it.

2. Security nuts, providing they're the type that use an INTERNAL socket, not external (ie. a pattern on the inside and round on the outer, so that no-one can just hammer a plain socket on) are a good idea to help protect your wheels. And don't chuck the socket to un-do them in the glovebox as it defies the point, attach it to your keys where possible. But again, it'll raise the risk of someone breaking in or breaking a window to find the socket.

3. As above, a decent alarm with shock/level sensors will help.

There it is. Security nuts for the wheels, keep security socket on keyring, quality alarm system professionally installed, security light in carport, dummy security camera could be the go. Body kits, probably accept that they could be ripped off but are replaceable. If you can't go that road get a lockup garage. Attractive items cost money to protect, that's all.

Cheers GW

Yeh had the idea kinda like the siklaflex one, maybe drilling the heads of the screws so they are bured out to not work then slapping some bog over them to kinda hide the position, n if I do need to take it off one day just crack the bog away and drill out the screws?

I like the idea of one way screws however...

It was in yokine ahh33, I'm surprised at how quick they were to pick up on it bein there as it was the first night of having it

Could it be linked to previous owner???

I don't know but it seems unlikely, he's a fairly genuin guy and loved the car to bits. Was also shocked to hear about it, the chain seemed to work last night but pain in the arse to get in in the morning hahah looks quite funny with a chain around it

I would have to agree with these as well.

1. Security nuts (Expensive ones, different sets for front and rear wheels) for the wheels.

2. Quality alarm system professionally installed.

3. Security light (Movement sensor ones) in carport.

4. Security camera (If you want to spend abit more).

I actually can't think of a reason why they would want to steal a body kit though. :P Maybe they are not capable of stealing other parts?

It's a pain to worry about your pride-and-joy when it's parked out in the open. That's why I waited until I got a house with a lock-up garage. Then, I put on a security flood light (Movement sensor ones). Plus, my car already got a decent alarm system on the car.

Good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When's the rear mounted turbo kit coming? Needs dose and V8 chop idle lol.
    • I was very unimpressed with how the car came up from the A pillar forward, before I hit things (twice). It all has to go. It had to go, but now it has to go... more. So we finally found the very first Shennanigans with the entirely perfectly setup engine that had no problems being pulled apart to improve on 'was perfectly fine'. Cam bearings looked a bit... stock. Which isn't entirely bad given they were stock and this is a ~20 year old engine. So new cam bearings are on the way because it's somewhat difficult to get to this stage to do it later, and it will trash the block. It was quite unusual that it wasn't done when the perfectly new-looking VCM cam was originally installed by [unknown] What IS unusual is the cam that was installed there was advanced SIX degrees. As to why there is no way to know.. however it could have been @Dose Pipe Sutututu's mate who wanted a larger cam sound but also wanted it to come on earlier to be more usable. This is my dyno sheet with the previous setup - This cam is not supposed to peak until 7000+ RPM, according to VCM. This is what lead me down the whole 'my heads/intake setup is running out of puff and can't support the cam' line of thinking to begin with. Anyway too late now - New cam is in! It could be rather funny if this smaller cam acts like a larger cam because it isn't advanced six degrees. In the spirit of everything is working amazingly - the COMP cam required no dialling in whatsoever. It was about 0.5 degrees advanced, which seems pretty bang on. Any adjustment either way would be further out. In the spirit of everything was previously working amazingly - The timing gear that was taken out turned out to be was an N-Motion double timing chain kit, with adjustable cam gear (which is how it was 6 degrees advanced) and all looks entirely perfectly new. It also had a Torrington bearing, which was one of the reasons I ended up getting the Cloyes kit which they used in the C5R 24 hour racecar - Because I couldn't confirm what was in the engine when talking to Tony Mamo. I did believe however it was a Double chain kit of some kind... but found no supporting documentation or evidence for it.
    • I recently did this to my R33 with the full set from Car Mats Direct, they can't do the vinyl anymore that's advertised on the website due to a supplier issue so I ended up with the Black Loop Pile which looks great. I went all out with rubber sound deadening sheets from Repco and also added the sound deadening foam layer option with the carpet. Makes a world of difference and got rid of all the weird smells in the 29 year old interior. It was a bit of work but I'd 100% recommend it, Car Mats Direct had awesome customer service and quick postage. Replaced my seats with some sporty ones from Autotechnia while I was at it, feels like a new car.
    • Got the motor out and torn down. I'll be dropping off the block Monday. Luckily the scoring on Cyl6 is much less pronounced then the pictures made it out to seem. It can barely be felt. If you pass your finger over it 10x you'll barely notice it. Hopefully by some chance it will only require a honing. I'm not in the mood to buy one size larger pistons or another block. Oddly enough my 6th cylinder with the scoring has extremely clean intake valves compared to my other 5 cylinders. I'm worried the scoring was caused by too much fuel or Water/Methanol washing the cylinder. I'll review some old logs to confirm.  This was also the first time I pull an engine with the transmission still attached. It went much better then expected. I was worried my CD009 wouldn't make it easy due to its sheer size but it was much easier this way. 
    • From the pictures I have when doing the job the flywheel is the same diameter, I don't think they're playing weird tricks like putting weights at the outer diameter to increase flywheel inertia or anything like that. The OEM flywheel is definitely heavier, but it's not a huge difference. Quoted weight savings of the clutch is 2 kg so I can't imagine the flywheel being lighter than ~7 kg. Kind of regret not weighing it before the clutch went into the car but as far as driveability goes I have no complaints.
×
×
  • Create New...