Jump to content
SAU Community

Recommended Posts

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

No doubt Winton is heaven for EVOs, but a good car punted well will be quick everywhere! They do look mint in silver, and to think it was havinga ew problems but was still so quick. Even with only 2L you put me into the shade :) But I was louder...thats all that is important

Yeah good point, but it does lack top end power, will see next month as I'm thinking of entering the WRX round at Sandown...

and with a damn nice note to boot Troy. Glad to see you actually got to enjoy the thing for the whole day.

Had a fantastic day taking 1s off my PB in the cars second outing. Admittedly i dont mind the RWD or lack of front wheel driving force :ninja:

Jack pulling that time in your first outing is just plain silly.

You can talk, doing sub 1:40's on street tyres in a rwd car is very impressive, same goes to ssxRicho, you guys drove the wheels off that thing, on standard brakes!!

Nice vid there Troy, time to get rid of the seat rail and look at getting the seat solid mounted to the floor. I had a Bride seat rail in the GTR and although it didn't slop around like yours it did have a litlle play in it....

Fark that thing sounds insane, good to see your punting the thing and getting more needed seat time....

Jack, with limited seat time, you had the car pegged almost from the get go. The silver with black enkeis looks the part as well.

I can't believe the Femno and Jonny car went through another set of pads. You guys drive the nuts off that car thumbsup.gif

The weather the way it was, PB's were had all around (would have been nice if the sun stayed out mind you and put some heat in the track)

Marty and John in the GTR also got PB's.

Bloody brilliant day. Troy where is the video of you sliding out of the 110deg left corner. I have one of me looking in the rear mirror giggling like a school girl.

But here is the last session of the day.

Me chasing Justin chasing Troy

Thanks for the feedback Jack. I'll ask you the same q when you've spent some more time behind the wheel.

Bris - holy crap that seat is moving around heaps :unsure: I have Bride rails in mine and there is no way they move around like that! Have they been around the block a few times or maybe its the fitment to the car??

WTF?? Jack has an EMO? Brisby did an entire track day in his R32?

What's the world coming too!!?

Oh and Jack - don't write off the EMO straight line capabilities. Blaise's car with an EMO 9 turbo and an E85 tune has my car pegged in a straight line. Drop the weight and get the tune right and they will run a sub 20 no worries.

Thanks for the feedback Jack. I'll ask you the same q when you've spent some more time behind the wheel.

Bris - holy crap that seat is moving around heaps :unsure: I have Bride rails in mine and there is no way they move around like that! Have they been around the block a few times or maybe its the fitment to the car??

Ye but you weigh half as much as Bris dude lol, that's a fair factory in itself :D

How i miss screamer pipe, im gonna be dreaming of external gate tonight for sure!

Me chasing Justin chasing Troy

Good vid! I dont think I have ever seen you drive so straight and accurate! :) You do seem to give away a fair bit in the straights so must have been fun really leaning on it in the corners and under brakes to keep up with us. Can see why it was so much fun :)

Will post up some more vids tonight. There are plenty of my usual bloopers from either trying too hard ot trying something different :)

Bris - holy crap that seat is moving around heaps :unsure: I have Bride rails in mine and there is no way they move around like that! Have they been around the block a few times or maybe its the fitment to the car??

Yours are for the bottom mount seats so are completely different to the side mount rail I am running. Yes, had the seat out on Saturday, it is bent from all the moving around. Straighted the strap on the rear tunnel side mount and welded some 15mm angle iron to strengthen it. But still not good due to the design....I am just going to make another rail like my old one. LOL, I happily gave it to a friend because I thought it was too heavy. Seems with strength comes weight :(

you are kind of asking a lot of it big fella ;)

LOL, yeh I know :)

I have solid rails that I made for me GTR, they work great and doesnt bother me that theyre fixed because im the only one who drives it.

well I didn't make mine, but they are solid mounted.

car vs wall at 50kmh, rail held up fine.

http://www.nzkw.com/nzkw-bolt-on-seat-subframe-skyline-r3233-p-250.html

Cool, thanks. Could well be easier then making my own. I will have to see how I go. I did get these made up when i was going to soldi mount my seats. But holding off because I want to wait until i strip out all the sound deadening and colour code the whole interior.

med_gallery_462_50_67568.jpg

med_gallery_462_50_97867.jpg

Jack, with limited seat time, you had the car pegged almost from the get go. The silver with black enkeis looks the part as well.

I can't believe the Femno and Jonny car went through another set of pads. You guys drive the nuts off that car thumbsup.gif

The weather the way it was, PB's were had all around (would have been nice if the sun stayed out mind you and put some heat in the track)

Marty and John in the GTR also got PB's.

Bloody brilliant day. Troy where is the video of you sliding out of the 110deg left corner. I have one of me looking in the rear mirror giggling like a school girl.

But here is the last session of the day.

Me chasing Justin chasing Troy

Nice vid Richo, what software program you using to sync video with gps data?

racechrono2avi, all you need to do is export the csv data from the gps (not sure if that will work with the qstarz data).

http://www.racechrono.com/news/?p=92

then bring them together with premiere elements.

you got kids? you can get elements student edition, $90. Else $130-140 ish.

and me giggling as Troy gets his sideways on.

WTF?? Jack has an EMO? Brisby did an entire track day in his R32?

What's the world coming too!!?

Oh and Jack - don't write off the EMO straight line capabilities. Blaise's car with an EMO 9 turbo and an E85 tune has my car pegged in a straight line. Drop the weight and get the tune right and they will run a sub 20 no worries.

Serious? I thought it would take more than that to keep up with your car in a straight line, what power is Blaise running?

I'd say there might be a 1:22 in it at Sandown the way my car is at the moment, although I don't know how it will handle the ripple strip abuse.....

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...