R34 Arc Smic Leaking Through Bolt Holes

[steveR34gtt]

I have just bought a 2nd hand ARC SMIC of off ebay for my R34 GTT. Before installing it I have have my mate who works at an intercooler manufacturer to check it out for me. He has set it up for a pressure test and it is leaking out all the bolt holes. I have tlked to the guy who sold it to me and he keeps trying to convince me that this is how it was produced. I find it extremenly hard to believe that a reputable company like arc would manufacture an intercooler which has bolt holes going into the tank and requires you to seal up bolts when you install.

IIf anyone has had any experience with these coolers or ARC and can shed some light on this for me it would be much appreciated.

[R31Nismoid]

on my phone so hard to see pics... but looks like its not bolt holes, and leaking from the core/end tank area?

If so... its probably been dropped or something.

It's possible it came like that and owner never knew as its not leaking heaps by the look of it.

[steveR34gtt]

on my phone so hard to see pics... but looks like its not bolt holes, and leaking from the core/end tank area?

If so... its probably been dropped or something.

It's possible it came like that and owner never knew as its not leaking heaps by the look of it.

It is definitely the bolt holes you can see they have been drilled through or retapped through into the tank when you look in the inlet and outlet.

The guy who sold it to me keeps harping on about making sure I seal the bolts correctly when I install it. Question is was the ARC SMIC manufactured with the bolt holes drilled through into the tank? I doubt that any intercooler manufacture would design an intercooler this way.

[zebra]

Just seal the holes and be done with it.

[Room42]

I work in a place that makes massive radiators and also repairs/services them and intercoolers. When we test them if there are any leaks we get them welded up. Then we test them again etc. Sounds like they stuffed up yours mate and I would send it back and get one that doesn't leak. P.s. I just bought a 600x300x100 (core size) intercooler from ebay. Only $240 to the door and doesn't even get hot . No leaks either

[Harey]

I work in a place that makes massive radiators and also repairs/services them and intercoolers. When we test them if there are any leaks we get them welded up. Then we test them again etc. Sounds like they stuffed up yours mate and I would send it back and get one that doesn't leak. P.s. I just bought a 600x300x100 (core size) intercooler from ebay. Only $240 to the door and doesn't even get hot . No leaks either

What pressure drop though?

[Adriano]

Is it really an issue?

[steveR34gtt]

Problem is, I was sold an item that was supposedly it great condition and it is obviously not.

The intercooler manufacturer where I have had it tested does not recommend using sealant in the bolt holes due to the possibility that it will come off inside the cooler and enter the engine.

He has recommended drilling out the existing threads and welding in a new section of round bar which can be tapped properly.

To me this sounds like the best and most professional way to rectify the problem.

Back to my original question, There is no way an intercooler manufacturer would intentionally drill there mounting points through into the tank? I gather this is a correct statement.

[zebra]

Of course they are saying that...it makes them money.

Lol at sealent not working...wtf do you think is stopping air leaks in your turbo compressor housing where it bolts to the CHRA.

[steveR34gtt]

Of course they are saying that...it makes them money.

Lol at sealent not working...wtf do you think is stopping air leaks in your turbo compressor housing where it bolts to the CHRA.

They are not making any money. They are going to fix pro bono as I know the supervisor there.

And they never said that sealant wouldn't work. Sealant can fix a multitude of problems.

But my question still remains unanswered.

Would ARC make an intercooler that requires you to seal the bolt holes as they are drilled through into the tank?

[zebra]

Well,

You have an ARC cooler with holes through the tanks.

Why are you still asking the question?

[R31Nismoid]

^

I've just had an idea, You should call/ask ARC and ask them i think.

[Moodles2]

ARC went belly up 2 months ago

[Room42]

What pressure drop though?

2 psi less pressure drop than the r34 smic that was on there. I got 2 psi more on the gauge after I fitted it. A mate has the same one on his 45 psi 600hp plus sr20 drag car

[Room42]

Mate the easy way out is to put thread sealant (white crap) on the bolts and fit it up. We use the same crap at work for fitting plugs into big steel and copper intercoolers (called aftercoolers but whatever) and they are good to 50 psi. Sounds like someone put bolts into your cooler that were too long and wrecked it. Get it fixed if its free but other than that don't stress

[R31 POWER]

If it's leaking through the bolt holes NOW wont it be fine once your cooler bracket is bolted to it???

[Room42]

2 psi less pressure drop than the r34 smic that was on there. I got 2 psi more on the gauge after I fitted it. A mate has the same one on his 45 psi 600hp plus sr20 drag car

but to answer your question entirely, I haven't measured it

[steveR34gtt]

The bolt threads are also stuffed so like Room42 suggested I reckon that the previous owner has used bolts which are too long and has overtightened and stuffed them up.

As the going says don't treat the symptoms fix the cause.

I'll be getting the unit repaired professionally with new bolt stubs installed.

Didn't really get an answer to whether or not intercoolers are manufactured with bolt holes through into the tanks or not but thanks for your help anyway.

[Duncan]

at the risk of trying to answer the original question.....I do not know for sure, but I cannot imagine any circumstance where a professional manufacturer would drill open holes through a sealed part of the intake.

sounds much more like dodgy prior installation than original build