Jump to content
SAU Community

Recommended Posts

I have just bought a 2nd hand ARC SMIC of off ebay for my R34 GTT. Before installing it I have have my mate who works at an intercooler manufacturer to check it out for me. He has set it up for a pressure test and it is leaking out all the bolt holes. I have tlked to the guy who sold it to me and he keeps trying to convince me that this is how it was produced. I find it extremenly hard to believe that a reputable company like arc would manufacture an intercooler which has bolt holes going into the tank and requires you to seal up bolts when you install.

IIf anyone has had any experience with these coolers or ARC and can shed some light on this for me it would be much appreciated.

post-69558-0-67795300-1304559517_thumb.jpg

post-69558-0-25845300-1304559532_thumb.jpg

on my phone so hard to see pics... but looks like its not bolt holes, and leaking from the core/end tank area?

If so... its probably been dropped or something.

It's possible it came like that and owner never knew as its not leaking heaps by the look of it.

on my phone so hard to see pics... but looks like its not bolt holes, and leaking from the core/end tank area?

If so... its probably been dropped or something.

It's possible it came like that and owner never knew as its not leaking heaps by the look of it.

It is definitely the bolt holes you can see they have been drilled through or retapped through into the tank when you look in the inlet and outlet.

The guy who sold it to me keeps harping on about making sure I seal the bolts correctly when I install it. Question is was the ARC SMIC manufactured with the bolt holes drilled through into the tank? I doubt that any intercooler manufacture would design an intercooler this way.

I work in a place that makes massive radiators and also repairs/services them and intercoolers. When we test them if there are any leaks we get them welded up. Then we test them again etc. Sounds like they stuffed up yours mate and I would send it back and get one that doesn't leak. P.s. I just bought a 600x300x100 (core size) intercooler from ebay. Only $240 to the door and doesn't even get hot :D. No leaks either :no:

I work in a place that makes massive radiators and also repairs/services them and intercoolers. When we test them if there are any leaks we get them welded up. Then we test them again etc. Sounds like they stuffed up yours mate and I would send it back and get one that doesn't leak. P.s. I just bought a 600x300x100 (core size) intercooler from ebay. Only $240 to the door and doesn't even get hot :D. No leaks either :no:

What pressure drop though? :)

Problem is, I was sold an item that was supposedly it great condition and it is obviously not.

The intercooler manufacturer where I have had it tested does not recommend using sealant in the bolt holes due to the possibility that it will come off inside the cooler and enter the engine.

He has recommended drilling out the existing threads and welding in a new section of round bar which can be tapped properly.

To me this sounds like the best and most professional way to rectify the problem.

Back to my original question, There is no way an intercooler manufacturer would intentionally drill there mounting points through into the tank? I gather this is a correct statement.

Of course they are saying that...it makes them money.

Lol at sealent not working...wtf do you think is stopping air leaks in your turbo compressor housing where it bolts to the CHRA.

They are not making any money. They are going to fix pro bono as I know the supervisor there.

And they never said that sealant wouldn't work. Sealant can fix a multitude of problems.

But my question still remains unanswered.

Would ARC make an intercooler that requires you to seal the bolt holes as they are drilled through into the tank?

Mate the easy way out is to put thread sealant (white crap) on the bolts and fit it up. We use the same crap at work for fitting plugs into big steel and copper intercoolers (called aftercoolers but whatever) and they are good to 50 psi. Sounds like someone put bolts into your cooler that were too long and wrecked it. Get it fixed if its free but other than that don't stress :thumbsup:

2 psi less pressure drop than the r34 smic that was on there. I got 2 psi more on the gauge after I fitted it. A mate has the same one on his 45 psi 600hp plus sr20 drag car :thumbsup:

but to answer your question entirely, I haven't measured it

The bolt threads are also stuffed so like Room42 suggested I reckon that the previous owner has used bolts which are too long and has overtightened and stuffed them up.

As the going says don't treat the symptoms fix the cause.

I'll be getting the unit repaired professionally with new bolt stubs installed.

Didn't really get an answer to whether or not intercoolers are manufactured with bolt holes through into the tanks or not but thanks for your help anyway.

at the risk of trying to answer the original question.....I do not know for sure, but I cannot imagine any circumstance where a professional manufacturer would drill open holes through a sealed part of the intake.

sounds much more like dodgy prior installation than original build

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • Something coarse-ish. 180 is good.
×
×
  • Create New...