Can Someone Make Me A Oil Temp Sensor Adapter

[SargeRX8]

Ive got a sandwich plate which takes a 3/8 UNF Fine and a oil temp sensor which fits into a M10 x 1.0mm Which I believe is a standard 1/8npt thread. Can anyone here make me one or tell me where to source it from? Obviously $ is to be had.

It needs to screw into the sandwich plate by about 1cm and allow oil to flow through to the sensor.

PM me or post here

Cheers.

[boostn0199]

Why dont you just go to a shop like enzed or something they should have an adaptor or worst case can make you one.

[SargeRX8]

I guess I can but I'm a lazy man and work has had me really really busy... I guess I can ring around or shop online... Just thought id ask here, give some $ to some SAU member.

[Risking]

I can machine up what you need

But I'm not going of those threads you have guessed at. I rekon 2/3 of them are wrong guesses.

If you can give me the parts you want to fit together no problem.

[SargeRX8]

The oil sandwich plate takes a 3/8 UNF Fine bolt. I tested this by going to Bursons and fitting it into a 3/8 UNF Fine nut. The oil temperature sender has been previously installed in one of these:

http://www.justjap.com/store/product.php?productid=17873&cat=&page=1

This unit which are 1/8 NPT. The man at the counter said that all oil temp senders and oil pressure senders use a standard 1/8 npt and its the odd one which is something different. He thought it was m10 x 1.0 as it went about 2 threads into a m10 x 1.0 bolt.

That is the same oil adapter as this:

http://cgi.ebay.com.au/OIL-FILTER-SANDWICH-PLATE-4-OIL-GAUGE-SENSOR-SENDER-BL-/120695420638?pt=AU_Car_Parts_Accessories&hash=item1c1a01f6de

The HKS/Greddy units also use 1/8NPT.

How much to machine an adapter?

[Risking]

Why not drill and tap the sandwich plate to suit the sender you have ???