Jump to content
SAU Community

Recommended Posts

Hi all,

I'm selling my 1989 R32 GTR which i have owned for a little over a year. It was previously owned by 'YAWN' (Melbourne). It has spent 90% of the time i have owned it in the shop with the engine stripped back and re made to what is listed below and what you see in the pictures. All engine gear is brand new with top quality parts.

I'm selling it due to other commitments including the purchase of a new car & boat - I'm not interested in swaping for anything, thanks.

As i dont care much for computers, i dont own one, so i'm writing this with the help from a mate.

125,000 Km’s on the clock – less than 5,000 on the new motor

All engine gear is brand new!!

· Tomei 2.8L Kit

· New R34 N1 Crank

· Tomei Pistons & Rods

· Jun oil pump (Billet)

· 9L extended sump

· ACL race serves main + big end bearings

· BAL rotating assembly

· Studs through out / ARP rod bolt

· Tomei pro cams

· Heavy duty springs (Valve)

· Ported head

· Adjustable cam gears

· Garret T042 Roller turbo

· Turbosmart 50mm gate (screamer)

· Exhaust manifold

· 3 Inch exhaust – Jazima

· Blitz BOV

· Exedy twin plate clutch / billet flywheel combo

· Dog box

· Apexi Power FC / Detro conversion

· Ray’s wheels

· Ohlins coilovers

· Brembo brakes

· Slotted rotters

· Dephi Gauges

· Momo steering wheel

· Nismo dash

· 4 Point harness

· Sony head unit

  • Bride bucket seat
  • Oil Catch can
  • Carbon Fibre hood
  • Front mount intercooler

There is probably a few more things not listed that i cant remember.

Car makes 400 KW ATW on 20 PSI – 98 Ron Fuel

Looking for $33,000 ONO

Car located on the north shore in Sydney.

Best to call to discuss.

Call me to come organise a time to come see the car -Damon 0406 819 511

Thanks.

post-65218-0-65662300-1304654530_thumb.jpgpost-65218-0-46415100-1304655270_thumb.jpgpost-65218-0-62442200-1304655276_thumb.jpgpost-65218-0-68495700-1304655286_thumb.jpgpost-65218-0-02039300-1304655292_thumb.jpgpost-65218-0-91007400-1304655300_thumb.jpgpost-65218-0-34868300-1304655307_thumb.jpgpost-65218-0-92617900-1304655313_thumb.jpgpost-65218-0-01307200-1304655320_thumb.jpgpost-65218-0-69830500-1304655326_thumb.jpgpost-65218-0-12556600-1304655333_thumb.jpgpost-65218-0-24236300-1304655341_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/363317-1989-r32-gtr-400kw-atw/
Share on other sites

Get Set:

2 oil pumps (N1) blew as they couldn't handle the power & the bearings seized to the crank, therfore the crank was replaced to the R34.

Dog box - straight cut gear set - syncro

Cams - Pro Cams.

If you want full specifications , You will have to give Tomei a call to retrieve off them as i dont have them.

Tony @ Boostech in Five Dock built and tuned the car.

Cheers!

Oh Dear Arab Skidder, "im confused on how does a r34 crank fit in a block now honned to 2.8ltrs?" Does anyone want to explain to this serial pest how wrong his comment is and why it makes him look like a uneducated twat? Hey AB, leave this thread alone, I think we can all make up our own minds about it.

:pirate:

update:

1000cc injectors - i believe they are siemans

Walbro internal pump - no surge tank

Unaware of the brand gear set sorry.

Car needs to go.

I will be putting it on carsales hopefully tomorrow to get it sold.

Thanks.

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Details: Turbo Borg Warner EFR 9180 with 1.05 rear housing Upgraded TurboSmart integrated BOV Sanded and powdercoated compressor cover in gloss black Elbow welded with wiggins clamp Speed Sensor(Not included) (Can include oil drain(heat wrapped + titanium intake pipe with almost new filter for a tad extra). Manifold: 6 Boost RB26/30 twin scroll manifold  e-MAP ports drilled into both scrolls(I was using the TAARKS EMAP KIT) Turbo is in excellent condition. Always used Penrite 15w50 Racing oil(Changed less then 2000ks). Also using the Turbosmart OP regulator and filter. Downpipe: 4inch Stainless steel with VBand inlet and outlet clamps(included) Heat wrapped Dual ports for Dyno/Wideband usage Will throw in free 2.5 inch intercooler pipe(2.5inch From turbo outlet to 3.5 inch intercooler) - Powder coated black. Turbo made 563rwkw on mainline hub dyno at around 24-25psi boost - Pump fuel. Will def make over 600kw on e85. Didn't bother as my e-MAP was through the roof with my setup sitting past the choke line. I have a cnc ported and fully built head on my 3.2. Turbine speed saw max of around 109k rpm. I'm running this on my R32 GTR, with AC, and the original power steering pump. The manifold clears the AC lines, ABS, and everything else. Although I had new AC lines because I just wanted new ones and I heat wrapped them as well. This will make more power on a slightly lower capacity motor with a higher PR. And I have since upgraded to a G45-1500. Have pics and videos if need be.  Absolutely nothing wrong with setup. Turbo is in perfect condition. No shaft play or oil leaks at all. All the work was professionally done. The transient response of this is fkn amazing. I cannot rave more about this turbo. If I wasn't chasing 4 figures, I would have kept it. $5000 NZ. Located: Auckland, New Zealand.    
    • I particularly like the look of the John Player Special team. (Thumbnail isn't different but hit play for the clip)  
    • Such a cool collection of cars back then.  
    • Mystery solved, thanks bro Bit of a strange mix, but i dont mind it, still looks good. 
    • nah no problems with bearings or hubs.  just the water pump leak and my AC death
×
×
  • Create New...