Jump to content
SAU Community

Recommended Posts

Ok so went for a personal loan as i was going to buy a new ve sv6 black ute for 28G but they would only give me 20G ( first loan ) so i already own a daily tx3 laser and a R32 Gts-T skyline 1989 type m which is currently sitting in storage not gettinv used.

So i then got thinking what i could do to it with 20 grand but wanted some ideas off everyone what you would do to build a good street / odd track car.

Its been resprayed in some kind of blue which im happy with has type m side skirts and rear pods, gtr front bar, n1 boot lip, has work - vs edition rims 17's good offset, nismo adjustable shocks and unknown springs there red guessing pedders, kkr adjustable castor rods.

Brass button clutch, rebuilt rb20det, r34 series one turbo, microtech lt-12's, front mount, 3" exhaust, high flow cat, 3" dump, unknown fuel pump injectors coilpacks, has a direct earth engine kit, also have a high mount mani with tial 38mm gate.

Have fair few guages ive just bought for it and also a short shift kit and $600 worth of hids which i got for $50 off a mate out of his supra.

Have a Few other things for it laying around. but where would i go from here build a rb20 with td-06 or chuck a rb25 in it our build a rb30det??

What would be the best one for a responsive street / occasional drifter

Thanks for any repliez happy to hear all of your thoughts cheers jahn.

Link to comment
https://www.sau.com.au/forums/topic/363346-help-me-spend-20000/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
    • Temu raptor, lol. At least the owner isn't your typical ranger danger lot
×
×
  • Create New...