Jump to content
SAU Community

Recommended Posts

Hey guys,

As above, when changing from Drive to Reverse and vice versa, the car jerks, also when driving the car it doesn't change gears smoothly, it does a little jerk.

When I went to pickup my spare key from Nissan, I asked the Mechanic and he said the timing belt was probably spinning too fast, but doing some research online, most seem to say it's either the Transmission Fluid or bad gearbox (Which I am dreading).

I was just going to wait until the next service, but thought I would ask you guys first.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/363528-car-jerks-when-changing-gears/
Share on other sites

Hey guys, sorry for the late response, I checked it before, while the engine was running, and warmed up and on a level surface, it seems to be between the highest hump on the stick and the top of the crosshatches, so it's a little over, but I noticed every time I pull it out, there are little bubbles on it?

Also what color should it be, it looks darkish.

EDIT:

Would having too much fluid cause the transmission to slip?

I read if there is too much it will cause the fluid to foam up?

There aren't many bubbles on the dipstick, like 1-4 little ones, but it could still mean the fluid is foaming up yea?

Edited by Converge

Ok, I think there is definitely too much transmission oil, I let the car sit out side for a good 3 hours before, engine was cold to the touch, took the dipstick out and it was nowhere between or on the crosshatching, it goes way past it on the cold side and even the hot side, where the crosshatching is further up.<br><br>But would this cause the transmission to slip/make the car jerk?

Edited by Converge

What was the verdict?

Was going to make a post about it before, but didn't think anyone was interested, so didn't bother.

But anyway, I went to a few places, was a bit odd, 1 said it was perfect, just on the line and the other said it was a little bit over, they did recommend me to get it serviced as the fluid looked pretty dark (Should be Pink to almost clear), so I will drop it off this week sometime to get it flushed. Hope it fixes the problem, but not going to get my hopes up. :(

Will report back later this week?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...