Jump to content
SAU Community

Recommended Posts

  • Replies 149
  • Created
  • Last Reply

Top Posters In This Topic

Anyone used a K&N filter?

Picked one up the other day from ABarn and it is a fair bit smaller than the Ryco (as in tiny!)

Then its the wrong one, just because the thread lines up doesnt mean its right (Thus why we were abusing Aaron before)

Then its the wrong one, just because the thread lines up doesnt mean its right (Thus why we were abusing Aaron before)

ah screw you all i've come to terms with and accepted that everyone will give me shit regardless..

Did you end up getting the Greddy filter?

What was the part number?

It should be 13901104 or 13901204 for VQ engine's :)

nah to be honest i went into CBF mode and just got the Ryco. doesnt bother me as i do changes every 5000km anyway

but the one i previously used is 13901104. little blue filter.

what do you think of the HKS ones? saw a few on ebay for $30//

what do you think of the HKS ones? saw a few on ebay for $30//

It is what I'm running at the moment with Sougi.

Will be changing it after 10,000kms (although I might try and stretch it to 12,500) so will let you know.

I tried out a Power Enterprise filer last time and have to say that all future filters will definitely include a magnet in them.

When I looked in the PE filter, I could see quite a few tiny "bits" stuck to the magnet.

As an aside, the HKS and PE filters could be one and the same... just the HKS is purple and the PE is white.

They both state the same features with very similar advertising. Look the same internally and about the same weight.

It is what I'm running at the moment with Sougi.

Will be changing it after 10,000kms (although I might try and stretch it to 12,500) so will let you know.

I tried out a Power Enterprise filer last time and have to say that all future filters will definitely include a magnet in them.

When I looked in the PE filter, I could see quite a few tiny "bits" stuck to the magnet.

As an aside, the HKS and PE filters could be one and the same... just the HKS is purple and the PE is white.

They both state the same features with very similar advertising. Look the same internally and about the same weight.

yeh but where other than ebay(or the net) would you get em?

i know the Drift ones have a magnet, but without an anti drainback valve i dont think they're the greatest of designs..

yeh but where other than ebay(or the net) would you get em?

i know the Drift ones have a magnet, but without an anti drainback valve i dont think they're the greatest of designs..

HKS from ebay.

PE from VisionR

The filter medium used in the Drift filters is shithouse and with no anti drainback = fail.

Edited by iamhe77

LOL

Why do you make it hard on yourself?

Look at the menu on the left of the screen and scroll down to Power Enterprise, then scroll down to Oil Filter.

Alternatively, from the middle section select 'ENGINE" and then "Oil Filter".

You will need the OFII-02A filter

LOL

Why do you make it hard on yourself?

Look at the menu on the left of the screen and scroll down to Power Enterprise, then scroll down to Oil Filter.

Alternatively, from the middle section select 'ENGINE" and then "Oil Filter".

You will need the OFII-02A filter

ok found it!

i shall try this out next service being in perth should only be a few days shipping right.

i'm trying to find an oil leak i have somewhere..around the filter area..

i lose a good 1.5 - 2 litres every service..

probably half the reason im doing them every 5000km.

and this is sougi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for that.... If only I could do something once and be happy with that, like some people do....
    • I had no transmission at all so I managed to find a big box manual gearbox from an R34 GTT for an insanely good price in EU. I converted it to push type which cost more than the transmission almost, with parts from Amayama! These engines are very strong and can put out decent power with a properly sized turbo. You can save on money from parts like pistons and rods, and invest those in the transmission and other parts. I suggest you join the RB20 Enthusiasts facebook group, plenty of info and almost daily posts there about 20DE/DET/Neo+T builds. (I hope I'm not breaking any forum rules by mentioning third party platforms, just trying to help the buddy out)
    • Yeah, having tried all of those methods including BBQ+recipro/hacksaw, I ended up buying a bush press kit under $150 that works well, like this: https://www.ebay.com.au/itm/355967727167?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=sfmmuhxgqhm&sssrc=2047675&ssuid=dJvnaZ11TB-&widget_ver=artemis&media=COPY It basically has a range of pushers and cups with threaded rods between to press out a range of large bushes. The problem with any sawing solution is minimising damage to the subframe side, although it probably needs a quick sand afterwards no matter what solution you try due to damage
    • Hi. Thanks for the answer. I do not have instagram 😄 I too considering turbo the RB20DE NEO 🙂 But i think i upgrade the gearbox first or at least buy new.  
    • Just pulled the passenger apart so got a good idea, also the side bracket that pivots the top half is completely cooked.. how I don’t know.. haha and paid $400 also included a photo of the passenger seat! She is mint
×
×
  • Create New...