Jump to content
SAU Community

Recommended Posts

  • Replies 149
  • Created
  • Last Reply

Top Posters In This Topic

nah its not. no blue smoke at all.

i can actually see its coming from the filter area.. just not sure exactly where.. might degrease the whole lot a couple of days before the next service to see where it is..

turbo's getting fixed once we finish scottys GTX i got a cheap quote from Hypergear so will get it done!

and if theres anymore problems im gonna buy scottys or another stock one and start again.. what choice would i have.

Hey Aaron, I hear Craig's got a good one for sale :P

Why go Hypergear? Don't want to go GTX?

Does the HKS filter have the magnet in it? Time to get ready for my next service I think, stacked on the K's since I got it!

why would i want craigs? mine puts out more power nyaanyaa.gif and im not even tuned properly yet...

i only need a bigger wastegate, ive got a stage 2 sierra and its boost creeping up top.. proves our housings are good!

i take it u dont know much about my car in particular lol

Its not the turbo's fault, or the car really. The banjo bolt restrictor would have been partially blocked in Aaron's car causing the bearings to fail. Can you imagine how easy it is to block a 1mm hole with crud? I bet most of the turbo failures have been caused by oil starvation as im running 19psi on the stock turbo for 3 months now without an issue, and at 225kw so the shaft speed is right up there...

buy craigs because its broken down less and killed fewer turbos :P

How is craigs broken Down less? His is broken more than all of us. Remember he does have a different engine coz he brokeded his other one.. Not to mention the trabsmission flaring through every gear..

Stop trying to sell the mexicans your dodgy yank products we all know anything the yanks make don't really last

Yep, Carlton. "Melbourne Business School".

Hangman's Tour at the Gaol tonight. Gonna bag me a ghost!

BTW I did actually as a question related to this thread, that got lost in the bullshit... does the HKS oil filter have a magnet in it? I'm running the Nismo at the moment and will be due for a change soon.

Yep, Carlton. "Melbourne Business School".

Hangman's Tour at the Gaol tonight. Gonna bag me a ghost!

BTW I did actually as a question related to this thread, that got lost in the bullshit... does the HKS oil filter have a magnet in it? I'm running the Nismo at the moment and will be due for a change soon.

ghost tour is awesome!

yeh the HKS has a magnet in it..

  • 2 weeks later...

got around to fixing my oil leak yesterday.

drained the oil, pulled off the filter.

used a 22mm deep socket to get the plate off.

I dunno if it is just mine, but it was close to being blocked with a whole bunch of gunk. as if the oil have become almost greasy mud. to be honest i dont how oil was actually travelling through..

any way.. cleaned it all up ended up talking almost half a palm full of gunk out.. put it all back together with a new Greddy filter. and filled it with sougi.

once the car was warm enough after about 10-15min of driving, i gave it some Gas.. and found out my tunes is all over the place again and lean? didnt think it would make this much of a difference..

being cleaned i know ive free'd up the oil flow alot and the engine obviously. and at Idle, the car sound 200% better than it did 3 days ago.. and every other time i've done a service...

this could also be half the reason my turbo kept blowing lol

what is everyones thought? perhaps you should all check yours???

Cam/Craig/Iain: Please dont take the piss out of this my uncle just died so im really not in the mood.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for that.... If only I could do something once and be happy with that, like some people do....
    • I had no transmission at all so I managed to find a big box manual gearbox from an R34 GTT for an insanely good price in EU. I converted it to push type which cost more than the transmission almost, with parts from Amayama! These engines are very strong and can put out decent power with a properly sized turbo. You can save on money from parts like pistons and rods, and invest those in the transmission and other parts. I suggest you join the RB20 Enthusiasts facebook group, plenty of info and almost daily posts there about 20DE/DET/Neo+T builds. (I hope I'm not breaking any forum rules by mentioning third party platforms, just trying to help the buddy out)
    • Yeah, having tried all of those methods including BBQ+recipro/hacksaw, I ended up buying a bush press kit under $150 that works well, like this: https://www.ebay.com.au/itm/355967727167?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=sfmmuhxgqhm&sssrc=2047675&ssuid=dJvnaZ11TB-&widget_ver=artemis&media=COPY It basically has a range of pushers and cups with threaded rods between to press out a range of large bushes. The problem with any sawing solution is minimising damage to the subframe side, although it probably needs a quick sand afterwards no matter what solution you try due to damage
    • Hi. Thanks for the answer. I do not have instagram 😄 I too considering turbo the RB20DE NEO 🙂 But i think i upgrade the gearbox first or at least buy new.  
    • Just pulled the passenger apart so got a good idea, also the side bracket that pivots the top half is completely cooked.. how I don’t know.. haha and paid $400 also included a photo of the passenger seat! She is mint
×
×
  • Create New...