Jump to content
SAU Community

Wtd: Dr30 Front Bumper

OUTATIME
 Share

Recommended Posts

mastadd Proficient

mastadd

Posted
Posted

Shoot A PM to "Cazz" with your VIN i have heard that they may still be available ex Nissan Japan,

That may have changed tho,

Worth looking in to it if your really keen

Link to comment
Share on other sites
OUTATIME Community Regular

OUTATIME

Posted
  • Author
Posted

i got a new genuine s2 fr bar skin thru nissan aust maybe 2yrs ago. the reo is the more expensive part.

jon.

just out of interest, can you remember what they charged?

and yeah really after a dr bumper but can just cut a hole and reuse the washer pods if need be

Link to comment
Share on other sites
Factory 5 Mentor

Factory 5

Posted
Posted

If your into experimenting....

I have seen teh R31 (series 2) fit quite nicely. alot more of them on the ground too. You can pickup an R31 wreck (even pintara( for like $300/

Sorry for funny typing, have fuzzy eyes frm working too much

Link to comment
Share on other sites
R34 Mentor

R34

Posted
Posted

I fitted a R31 front bumper to my R30 project car about 15 years ago and from memory I had to cut an inch out of the middle for it to fit correctly.

Did look good though

Link to comment
Share on other sites
  • 2 weeks later...
cazz Rising Star

cazz

Posted
Posted

I have a JDM one, Series 1, I rckon the bumpers are the same between the models tho, doesn't look any different to my Ironmask.

Link to comment
Share on other sites
Ghostrider Grand Master

Ghostrider

Posted
Posted

I have a JDM one, Series 1, I rckon the bumpers are the same between the models tho, doesn't look any different to my Ironmask.

I think you will find the S1 model is quite a bit narrower than the S2 on your Iron Mask DR30.

D

Link to comment
Share on other sites
OUTATIME Community Regular

OUTATIME

Posted
  • Author
Posted

thanks 4 the offer mate, but yea fair bit different. s2 go all the way to the wheel arch where s1's are thinner all round and stop about half way to the wheel arch.

cheers

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      GReddy Injector Help!

      By Duncan · Posted

      Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • RB25inside
      Compatible rear drive shafts R34 N/A?

      By RB25inside · Posted

      Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • GTSBoy
      Compatible rear drive shafts R34 N/A?

      By GTSBoy · Posted

      They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Dose Pipe Sutututu
      GReddy Injector Help!

      By Dose Pipe Sutututu · Posted

      Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
×
×
  • Create New...