Jump to content
SAU Community

Recommended Posts

hi guys, have trouble starting my 32 GTS-t (RB20DET) when its cold and runs poorly till its warmed up a bit, took out the sensor with the yellow top ,near front of manifold ,and its broken! is this the cold start sensor and where can i get a new one in perth?

Link to comment
https://www.sau.com.au/forums/topic/364342-cold-start-problem/
Share on other sites

if its the one in top radiator hose (solid section that bolts to the motor) then its the coolant temp sender for the ecu and will cause some problems if its farked. not sure where you can get a new one but could try a second hand one, they're pretty reliable

if its the one in top radiator hose (solid section that bolts to the motor(YEP IT IS THAT ONE)) then its the coolant temp sender for the ecu and will cause some problems if its farked. not sure where you can get a new one but could try a second hand one, they're pretty reliable

yar,very cautious bout using secondhand 20 yo sensors ,mite be as borked as mine but looks like that might be the way i hafta go

thanks for that guys, will give repco a go as they are just up the road from me

Don't bother with repco, I work there, we don't stock such a part for an import. Each store would be 10x the size it is if we stocked something specific as a coolant temp sensor for an imported skyline!

+1 for nissan.

Don't bother with repco, I work there, we don't stock such a part for an import. Each store would be 10x the size it is if we stocked something specific as a coolant temp sensor for an imported skyline!

+1 for nissan.

i tried repco joondalup and they dont stock tridon stuff BUT he cross referenced it with another catalog and reckons a pulsar N15 one is the same and costs $43, will compare that price with DVG parts in bassendean when i givem a call monday

I have one that I no works u can have for 20 if u come pick if up txg or call 0411698969 cheers brenno

hi brenno, thankyou for the offer but i will try the new option first and give you a call if that falls through, thanks mate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...