Jump to content
SAU Community

Recommended Posts

Complete lock and key set for the R34 Skyline (2 door) - thus for both the ER34 and BNR34. To remove these out from the vehicle took a massive amount of work and labour. This lock and key set will be perfect to replace your unit for:-

1) Security if you've bought your vehicle from the dealers/unknown person

2) Replace faulty units that may have been damaged during break-ins

The key and lock set consist of the ignition barrel, boot lock, glove compartment lock, RHS door lock, LHS door lock and also 2 set of keys.

AUD 190.00

600x450-2010110100166.jpg

Link to comment
https://www.sau.com.au/forums/topic/364398-r34-lock-key-set/
Share on other sites

kenjz, when I said "Security if you've bought your vehicle from the dealers/unknown person", the scenario is like this.

A person buys a R34 from a dealer or a private seller. The new owner are afraid that the previous owner may have a copy of the key and it poses a risk in terms of security. Thus the reason to change all the locks. Similar to when you buy a house from another chap and changes all the lock.

If you're no interest in this pls stop polluting my thread. Thanks.

my point is. You can have a previous copy of the key.

i was just trying to point out somthing for anyone who may be interested in this.

if you still dont understand that, then forget about it.

good luck with your sale.

He may have another copy of the key, but he is in Malaysia/Singapore, so I don't think he will be coming to Australia to steal your car :P

Thanks Charles. Yes, I will not take a flight and try to locate your car. And if I do manage to find it, either take it for a joy ride or flick some of your guages and fly back.

It's sold anyway. Thank you.

:rofl: :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As strange as this sounds (as they are fixed back), my Bride Xero CS seats are the most comfortable seats I've used.  I vote go genuine.  The only downside I've found is on very long drives, you can't reposition your body while driving. So even though its comfy, being locked in the same position eventually becomes uncomfortable. I find myself stopping every 3 or so hours to stretch my legs on long drives. 
    • You don't have to be bored driving a Camry. Not based on the way that a couple of f**king Ubereats/Didi/othersortofmethaddlednightshiftattheservicestationrecentimmmigrants were piloting them on the way to work this morning. f**k me dead!
    • FWIW, the Bride reps are really nice to sit in. The only complaint I have, other than the tear in my bolster, is that the velcro used to hold the backrest cushion in place, up under the headrest, is a little obvious and intrusive and could probably be done better. I don't know if that is a "feature" on the genuine ones also though. I haven't looked at a genuine one like the ones I have, only some of the older models. The other thing is, even though I bought the CF ones, I think the CF is really just decorative, over the top of the same FG as the normal seats. And so they really aren't light. Between the solidly built CF/FG seat, the steel frame in the recliner mechanism, and the solid-arse seat rail, they are probably heavier than even the stock seat. They are a serious lift to get in and out of the car.
    • Yes, and so the barest minimum power target is the one that makes the most sense. Massive power is fun, but you can only use it for 1.5s at a time, and only every now and then. Medium power levels allow you to enjoy the car far more often and for longer. 500 engine HP is just below 300 rwkW which is about the maximum that is sensible for any street car really. And for a 2.6L six, it will still leave you with a decent boost response and some sort of linearity of power delivery. As you get up towards 400rwkW the onset of power tends to be increasingly like a cliff and you need drag radials to keep the ground in proper contact with the car, and.... it's just not a car for driving around any more.
    • I already reached that conclusion myself after reading up a whole bunch and watching various videos from multiple sources. Don't know yet how I'd best manage that with the least amount of headache. Probably pulling the sump and just welding on a AN10 adapter or something. I also think it's healthy to take most opinions with a grain of salt, because experiences differ wildly and especially Aussies - when talking about RBs - don't know a world below 600whp drag builds. Personally I doubt I will ever take my R33 racing, so it's going to be a street car with the occasional spirited drive. Hence why I am (so far) under the impression that I'm going to be fine with a stock-ish engine for a while.
×
×
  • Create New...