Jump to content
SAU Community

Recommended Posts

Hey guys,

I brought my car into a panel beaters after a minor rear quarter accident. Basically he fixed it all up and looks awesome; however there is a slight mismatch in colour and now my door panel sticks out. The door was untouched and one can see it is a different colour. I have returned to the beater and shown him this and has only offered to paint the door for a couple hundred. Isn't he liable for his work? Shouldn't he be able to repaint what he did? He told me it was hard to match the colour and he could never get it perfectly right. What are your suggestions?

Thanks guys

Edited by Mr.Massive
Link to comment
https://www.sau.com.au/forums/topic/364418-panel-beater-mismatch-paint/
Share on other sites

What colour is it? some colours are harder to match than others

Did you get it done through insurance? If so most insurance company's state that the work has to be to a factory standard, so take it back to him and if he argues call your insurance company and get an assessor to come have a look at it

If it was a cashie he is still liable for his work but it will be harder to fight

Umm...

what's to say that after the door has been done, the front quarter won't then stick out?

You got the rear quarter done/repaired > the door could be next > you're then chasing every panel around the circumference of the car.

Like the post above, some colours are harder to match than others; especially with pearl and more so with chromemulsion.

Some colours will change after being in sunlight for extended periods, so perhaps the door/foof/bonnet/boot is now lighter perhaps?

The bumper bars and skirts can tend to be slightly more dark due to the manufactured base colour.

Did you get some leftover touchup paint? This can be compared through another painter (at your cost).

Did this go through insurance as the post above mentioned/asked?

did the panel beater give the car a polish? if not, it might be worth getting the car professionally polished and see if that makes the door closer to the colour of the freshly painted panel, as old paint usually has a different colour to freshly cut and polished paint.

Who ever painted it should have polished the undamaged panels first, sprayed out a few colour cards and matched it in direct sunlight.

Best possible way to get a match even with the paint code, because paint fades/slightly changes colour and they would have to play with the tinters, pearl, etc to get it right.

The whole door shouldn't need to be painted, it should have been blended in when they did the quarter panel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Personal experience. Those f**kers burn. And are actually a PITA to put out. Next time I walk down the back, I'll snap a photo of what the inside of the bonnet looks like when that thing ignites. PS, powder fire extinguishers are useless on that stuff too as it's fibrous and when it ignites, it starts to pull apart. And you end up just blowing powder through a sieve effectively.   Like the big thing is, if it's fire resistant, it's job is to stop what burning? The METAL above it? It's just to try keep heat off the bonnet paint work.
    • Oh man, sorry, $60.00000000... 😛
    • That's more or less what he meant. What it really means is that you do not have to go full crazy on the build. Don't need the best oil pump, expensive rods & pistons, big cams, etc. You can upgrade whatever you want instead of using stock level items, but you don't have to. Having said that - any time an RB is opened up, if anything is getting replaced, I think the opportunity should be taken to do all the sensible upgrades. Pistons, rods, pump, etc.
    • February update 🙂 We managed to get the very last 1/18th "Extra Scale" cars stock available from bookstores in Kyoto. These are actually the last ones and will not be restocked again! Hachette Collections Japan have not decided on a release date for these or other models in the series, so for the time being these are all there are available new.  These are showing up on Yahoo auctions at inflated prices already (especially the Celica and NSX) so get yours now at a very reasonable price before they disappear! Stock quantities: NA1 Honda NSX - 1 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1990-na1-honda-nsx 1973 Toyota Celica LB 2000GT - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1973-toyota-celica-lb-2000gt 1968 Mazda Cosmo Sport - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1968-mazda-cosmo-sport 1970 KPGC10 Nissan Skyline 2000GT-R - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1970-kpgc10-nissan-skyline-2000gt-r
    • When you say basic rebuild, you mean an oem rebuild?
×
×
  • Create New...