Jump to content
SAU Community

Recommended Posts

My name is stuart and i have a issue with my r32gtr,

2 weeks ago the car just stoppeed and i believed either the cas or the ignition module was faulty,i borrowed both parts off a mates car and found it to be ignition moduel.

I bought a new unit and that has fixed that origional problem.I now have another

If i stand on the load pedal at 5000 rmp the car gets a flutter[like rev limit but softer]and the car still boosts fine,but if i squeeze the load pedal the car revs to 8000 rpm with out any flutter.

i have regaped plugs,cleaned and insulated coil packs[super sparks 2 years old,14,000km's]removed amm and resoldered,plus undone all elec plugs and cleaned with electronic spray.i have also looped out boost controller and checked rev limit on power fc.all sensor are working onthe car corectly.

Has any one else had similar problem and found the answer it would greatly appreciated.Thank you for your time

stuart 0409135950

Link to comment
https://www.sau.com.au/forums/topic/364486-r32-gtr/
Share on other sites

I take off and nail it and at 5000 to rev limit 8000 there it is the fluffy off tone hesitaion,but the car still pulls hard,damo of sau tassy thought it may be fuel pump so i clamped off fuel return line last night still has same issue.

I also lowered the rev limit on power fc then back to the 8000 as set made no difference,thought maybe a computer glintch.

I have also disconected battery for 1 day to reset power fc.

stuart

Link to comment
https://www.sau.com.au/forums/topic/364486-r32-gtr/#findComment-5816511
Share on other sites

If the coil packs and plugs dont fix,i am going to borrow a feul pump gauge and a nother power fc and amm,

all the parts i a borrowing are off a mate gtr that has same tune as mine.so i wont have to change any peramaters in fc

stuart

Link to comment
https://www.sau.com.au/forums/topic/364486-r32-gtr/#findComment-5817698
Share on other sites

Stu, you go into the sensor output screen on the pfc, this is a good way to test the afms. If they put out a different voltage (noticable diff) you have a problem. Are you running an aftermarket fpr?

Link to comment
https://www.sau.com.au/forums/topic/364486-r32-gtr/#findComment-5817871
Share on other sites

Hi rbnt

It looks like i have found the problem,one coil pack seems to be the issue,i have fitted my mate new units this morning and the issue has gone,so what i am going to do is keep putting min e back in one by one till i find faulty one.

A good call on the fuel pump i think i will buy a new unit as this one is 5+ years old.

A BIG THANKS TO EVERY ONE WHO HAVE GIVEN ME ASSISTANCE,AND I WILL HAVE TO UPGRADE PARTS.

STUART

Link to comment
https://www.sau.com.au/forums/topic/364486-r32-gtr/#findComment-5818369
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...