Jump to content
SAU Community

Intercooler Piping Keeps Blowing Off Help Plz

SYC-033

By SYC-033,
in Engines & Forced Induction

 Share

Recommended Posts

SYC-033 Contributor

SYC-033

Posted
Posted

whilst driving the other day i accellerated from first to second and the intercooloer piping on the right side blew off from the silicone hose as did the vaccum hose from the blowoff valve to the plenum have recently brought new vaccum hose and new stronger hose clamps but the intercooler piping still seems to blow off any ideas on what would be happening? any help would be great

Trozzle Grand Master

Trozzle

Posted
Posted

Take all the joiners apart and give them a good wash and degreasing! It's not about how tight you clamp it back together, if there's oily residue between the rubber joiner and metal piping it will still slip off!

I learned the hard way too :P

zoidbergmerc Mentor

zoidbergmerc

Posted
Posted

also if the piping does not have a lip or little weld tacs on the end get these done that way the clamp cant slip over the edge also

The Ebay IC cooler kit I got for my VL didn't have this either, I just made a cone out of wood and bashed that into the pipes to put a flange on it...

Good times...pirate.gif

Cheddle Enthusiast

Cheddle

Posted
Posted

as above, give it a good clean with brake cleaner or such to ensure no residues and then have a crack on the pipes with some heavy grit glass-paper to scuff it up and give the pipes something to hold on to. other wise take them to an exaughst shop and get a bead of weld tacked around it.

WYTSKY Veteran

WYTSKY

Posted
Posted

As other have said, but instead of finding something to bash the pipe to make a lip, I got one of those adjustable wrenches and slowly worked my way around the edge and flared it out, worked perfectly since because that was the pain in the ass one I had to keep half pulling off my front bar to get to.

horrace Rising Star

horrace

Posted
Posted

The Ebay IC cooler kit I got for my VL didn't have this either, I just made a cone out of wood and bashed that into the pipes to put a flange on it...

Good times...pirate.gif

f**k yeah backyarding like a BOSS!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R32gtr sputtering and stalling

      By MBS206 · Posted

      Diagnosing with and without is mostly the same. You need to know, as Duncan asked, and what conditions. Car hot, cold, idling, driving, if while driving what rpms, is when you're varying, or is it when held constant.   From there it's understanding what can be causing it. Starting with pretending all of the sensors are correct. Which means if it's going rich, why would it be thinking more air is going in than it is, and under what conditions. So things like if only when under boost, it could be be a loose intake piping joint. It's just understanding the system, and understanding when/how the problem occurs, and then if it's only occuring in specific scenarios, what can be causing it.   ECU specifically, if it's aftermarket, it'll have software you can use, for the Skylines on factory ECU, there is Nissan Consult you can use. Most ECUs have a way to get data from them.
    • silviaz
      R32gtr sputtering and stalling

      By silviaz · Posted

      How do you go about diagnosing ecu's that don't have data logging, is it more experience at that point and just trying out things that you think will fix the issue?
    • MBS206
      R32gtr sputtering and stalling

      By MBS206 · Posted

      Stock O2 are basically useless beyond anything at stoich. Any misfire will also be seen as lean. The stock O2 also read a collective exhaust gas volume, not each cylinder. Sputtering and missing means not each cycle is firing, and some are. Which means even if rich, as shit, on cylinders as they miss, they'll read lean, but the cylinders that did fire will read rich, and combined, well, they can read anything from rich to lean.   Start with the basics before even going looking at sensor values.   Edit: I say the above, and that's coming from the guy with a few thousand dollars worth of scan tools sitting right beside me right now that I use frequently for my job.
    • sk8boy204
      Auto GTS4/Stagea transfer case.

      By sk8boy204 · Posted

      I just finished up a manual swap and I have a 1999 S2 AWD automatic in my garage, depending on where you are located. I'm in the the midwest of the US.
    • r32-25t
      R33 GTR N1 REO on an r32 ?

      By r32-25t · Posted

      I’ve heard it can be done, you need to redrill the holes where they bolt to the chassis and apart from that they are the same. I’ve never done it or know anyone personally that has, it’s just something I’ve heard 
×
×
  • Create New...