Jump to content
SAU Community

Recommended Posts

Hi guys. I have a 2004 350GT Premium. I'm not too happy with the BOSE sound system so I decided that I'm gonna change the setup.

-New Head unit.

-New Speakers

-Amp

-Subwoofer

I've had a look around the forum but I can't really find anyone who has done a complete audio revamp of their V.

Can anyone recommend someone or a place in Sydney that will be able to do the job?

Is it better to replace the control panel to accommodate the head unit? or should I just

place it inside the glove box?

any suggestions would be great.

Link to comment
https://www.sau.com.au/forums/topic/365036-not-satisfied-with-the-bose/
Share on other sites

I wasn't satisfied with it either :)

A pillars

post-59606-0-21627300-1306163779_thumb.jpg

head unit (when a work in progress)

post-59606-0-78209300-1306164455_thumb.jpg

I purchased the separate AC controls from Infinity USA and fitted them to the stock fascia which has been modified for the single DIN Head Unit.

Boot

post-59606-0-74595500-1306163901_thumb.jpg

post-59606-0-07938700-1306163935_thumb.jpg

that there is $3.5k worth of installation (labour & materials only

Edited by mosoto

I wasn't satisfied with it either :)

A pillars

post-59606-0-21627300-1306163779_thumb.jpg

head unit (when a work in progress)

post-59606-0-78209300-1306164455_thumb.jpg

I purchased the separate AC controls from Infinity USA and fitted them to the stock fascia which has been modified for the single DIN Head Unit.

Boot

post-59606-0-74595500-1306163901_thumb.jpg

post-59606-0-07938700-1306163935_thumb.jpg

that there is $3.5k worth of installation (labour & materials only

Great setup there Mark.

Would I be right in saying those A pillar splits are something from the top-shelf brands? - Looks like Morel to me but could be wrong. Do you mind walking us through your setup? Or if you've detailed it in another post could you kindly link us up?

Cheers

I wasn't satisfied with it either :)

A pillars

post-59606-0-21627300-1306163779_thumb.jpg

head unit (when a work in progress)

post-59606-0-78209300-1306164455_thumb.jpg

I purchased the separate AC controls from Infinity USA and fitted them to the stock fascia which has been modified for the single DIN Head Unit.

Boot

post-59606-0-74595500-1306163901_thumb.jpg

post-59606-0-07938700-1306163935_thumb.jpg

that there is $3.5k worth of installation (labour & materials only

very nice.. though i wont think i'll be spending that much.. i'll be spending more on the range of $1.5K-2K

just started shopping around ebay for the dash conversion. strathfield car radios is selling the dash conversion for $500 :|

massive rip off.

Great setup there Mark.

Would I be right in saying those A pillar splits are something from the top-shelf brands? - Looks like Morel to me but could be wrong. Do you mind walking us through your setup? Or if you've detailed it in another post could you kindly link us up?

Cheers

Thanks Tarun. The system is as follows:

Speakers - Hybrid Audio Technology or HAT. 7.1" midbass, 3" midrange and 1" tweeter.

Amps - Zed audio Leviathan 6x150w one for left side one for right.

Head Unit is the Pioneer P99.

Subs are Image Dynamics IDQ12's

All speaker cabling is Canare.

Signal cable is 8 channel Mogami snake cable w/- stinger bullit ends.

I've got a 160GB hardrive in the centre console connected to the HU via USB so I rarely use the CD.

A link to my build thread on MEA is here. Sorry, it's a members only section so the link will be no good unless you join MEA. :) but well worth it if you are into car audio

Edited by mosoto

Mark i would sugest checking out ebay and getting a din replacement from ebays, you can get em for like 100 bucks for just the face, also i have a non prem v 2003 are the speakers in front and rear the same size? im thinking i might get some pioneers installerd.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Also, at that point if the engine support stand slips I hope you can bench press 200+kg of RB26. Considering the oil pan has to be RTVed on as well which has like a 15 minute working time between the first drop coming out of the tube to fully torqued to spec I would probably never attempt pulling the oil pan unless the engine is on a proper stand.
    • It’s a gtr, has an alloy sump and will not stick to it obviously 
    • Just wait until R31s catch the contagion.
    • As you can tell from updates....I haven't had a lot of shed time lately. When I'm on this though, I feel like I'm reliving Neil's last days. Everywhere I go on the car I seem to come across something he was working out. When I went up to his place just after he passed, I noticed he had a RB starter motor in the vice. And sure enough, this was my shed today So, last episode I mentioned the battery had 12.4ish volts but when I turn on the kill switch it drops to 9ish volts. Even with the stater main power removed, same. Matt said above: And yep, when I removed the solenoid power from the starter, the voltage jumped from 9 back to 11.7ish. Thus my testing the spare starter this arvo. Spare is good to go, just need to throw it in tomorrow. I'm not convinced that is the only issue as the voltage still drops from 12.4 to 11.7 when I turn the kill switch on, but first things first
×
×
  • Create New...