Jump to content
SAU Community

Recommended Posts

Item Summary: 1988 NISSAN CEFIRO a31,

Location: QLD: Gold Coast

Asking Price: $14,000

Condition: Used

Reason for Selling: want something more sensible

Delivery Methods: PickUp

Contact Info: 0403557352

Extra Information:

I've decided to get rid of my Cefiro.

I am the first and only owner in Australia (have all import papers still) and have owned it for about 5 years now.

Reason for selling/swapping is I've started going to uni and need something more practical for the next few years.

$14,000 or swaps for a Manual, IS200 with the luxury interior or 3rd Gen Honda Odyssey

(or some similar jap/euro styled car)

Please no commodores etc, I don't care how hektic the sound system is or how good it bakes that one tyre.

Specs are bellow.

1988 Nissan Cefiro

Engine/Drivetrain:

S13 Blacktop SR20DET conversion (has done under 3000k's since rebuild)

20 though oversized Wiseco Forged Pistons

Eagle H-Beam Rods

Fully rebuilt head

Cosworth Metal Head Gasket

Rocker Arm Stoppers

8 Brand new Rocker Arms (genuine nissan)

Tomei Poncams 256/256 11.5mm lift

Denso 550cc injectors

HKS GT2530 (Purchased new)

Nismo Engine Mounts

SR20DET 5-Speed Box (Freshly Re-Co'd)

Apexi Power FC D-Jetro

Custom 3" metal intake

Greddy Dump Pipe

Modified Midmount Hybrid intercooler

Custom intercooler piping

Mechanical 2way LSD

HKS Remote Mount Oil Cooler with Trust Core

Alloy Radiator

Extra Capacity Sump

Exedy 5 Puck Brass Button (5000km old)

Custom 3" Dump Back Exhaust (tucked up nice and high)

High flow 3" cat

Bosch 023 Fuel pump

All heater hoses etc were replaced when rebuilt (or removed if unnecessary)

Suspension & Bracing:

Racing Logic Coilovers 9F/8R

Ikeya Formula Tie Rods

Ikeya Formula Lock Spacers

KTS Adjustable Toe Arms

KTS Adjustable Castor Arms

R32 GTR rear sway bar

Unknown Jap Adjustable Camber Arms (gold colouring makes me suspect ikeya formula)

Full 5 Stud Conversion

R32 Skyline Front Brake Upgrade

Solid Cradle Spacers

All traces of HICAS removed.

Cusco Front Strut Brace

KTS Rear Strut Brace

Aesthetics:

Late model interior (suede instead of carpet stuff)

Late model Tail Lights

Late model non projector headlights

VIP Tint all round

New weather shields

Recaro Reclinable Drivers side Bucket seat

HKS boost gauge

Nismo Shift knob

Pivot fan controller (used to read water and oil temps)

Autech Edition Bodykit

White Work Emotion CRKai's 17x9 front

White Work Emotion CRKai's 18x9.5 rear

Engine is making 200rwkw at 16psi

I had this engine built with maximum torque and response in mind.

Full boost by 3000rpm and pulls until limiter

I wanted to have it tuned for 22psi+ but the HKS wastegate would only support 16psi safely

should crack 220+kw with a decent EBC

w0pegi.jpg

IMG_1012.jpg

IMG_1014.jpg

IMG_1015.jpg

IMG_1017.jpg

IMG_1018.jpg

Link to comment
https://www.sau.com.au/forums/topic/365051-a31-cefiro/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I'm thinking that this is such a small part of the problem that you could easily forego the vac pump and just achieve 90% of what you need, which is keeping the gate open when off boost. It's not as if there are not already techniques to keep a gate fully closed under boost. After all, you have boost. Just use a wastegate actuator that will allow you to apply the boost on the appropriate side, just like every external gate out there.
    • Heres another fitment photo. redrilled the pattern to 5x112, and threw my audi´s rims on. had to touch the upper control arms with grinder, because the "sharp corner" was sticking about 2-3mm on the tire path. i have the "fender lip" mostly cut off, otherwise these (too) would contact with it. 20x9.5 ET25 rear    265/30 20x8.5 ET20 front    255/30 they are temporary, and look too big for the chassis. searching for 19s to it.
    • From experience, it will come back to bite you haha.
    • Background: my BMW 225i hatchback (rebodied MINI/X1) came with 3x RE003 and 1x Goodyear Asymmetric something. The RE003 roared and slid around, the Goodyear side was quiet and grippy. Definitely my car was thrashed before it got sent to dealers. My brother also got RE003 all round on his old VA WRX STI, I wasn't impressed with them, car was loud so can't comment on noise. Anyway, Hankook stopped making/updating V12 Evo2. So bought S1 Evo3 runflats. Great daily duties tyre and not that harsh ride. Tyre reviews site/youtube rated them as best stopping in the rain and I believe them. Next set, Goodyear Asymmetric 5 non-RFT. It beat PS4 in tests and is like $100 cheaper, so put them on. Great tyre, more grip then S1 Evo3 but a tad noisier as expected, still rocking them. Next set I am looking to go runflats, probably the new Hankook Evo. Although the new Pirelli PZ5 did well in tyrereviews test. Or go Goodyear Asymmetric 6 which was top tyre last year. The V12 Evo2 on my gen5 Liberty GT wagon did great in cold condition (drove to snowy mountains for a day so my husky can feel his ancestor's roots). Super impressive performance for $120 each lol. Never skimp on tyres, brakes, suspension. There's old pics of my R31's crappy random brake pads bending in the caliper at Oran Park track day somewhere around here. Anyway, my 2 cents.
×
×
  • Create New...