Hid Lights Into R32 Projrceors?

[Rev limmiter basher]

Hi

My projectors in my 32 arnt realy good for visability at night time so i was thinking of getting some h3c HID Lights to go in behind the projector lenses. has this / can this be done.

All help would be appreciated

thanks all

[NYTSKY]

Just take the halogens out and put the HID bulbs in. Find a place for the ballasts.

Job done.

Been covered before, do a search.

[R.3.2.G.T.R]

don't put hid into 32, it will still be crap and u will oncoming cars

I'm using Phillips xtreme power 80% and it's bloody good, I could barely see anything at night prior, it cost more than other bulbs, still cheaper than hid but great improvement

[Rev limmiter basher]

Just take the halogens out and put the HID bulbs in. Find a place for the ballasts.

Job done.

Been covered before, do a search.

ok thanks for the help but i have searched and cant find a H3C made by vega Diamond so will H3 Work??

[nme032]

hey I had the same issue in not finding any bulbs to fit H3C,

I think stuffed up, I just bought a H1 adapter plate, it simply replaced the plate/bracket where the bulb sits in, and I bought a H1 HID kit.

It could be a general issue with having the H1 or any other longer bulb than that is the same length as the H3C, is that as I have speculated tonight it will spread the beam more wider then pissing off other oncoming drivers, and so on.

If your chasing a HID kit, I reckon:

dont get something that is no different length than the H3C,

and if you need an adapter plate that'll hold your new bulb, get it from importmonster or something

cheers

[NYTSKY]

Normal H3 fit fine.

[MrWindsurf]

Normal H3 fit fine.

except you will have to modify the wiring to get it to work

[bubba]

I made the H1 HID's I got for the wagon fit the H3C bulb holders. Was a fair bit of fking around, drilling and cutting but they fit nice now. When I get a new battery I'll fire them up and see what it looks like.

[nme032]

http://www.skylinesaustralia.com/forums/topic/93963-xenon-hid-lights-conversion-for-r32/page__st__60

[GLau]

Normal H3 fit fine.

Yes.... PnP bascially.... but that's for HID =)