Jump to content
SAU Community

Recommended Posts

My r32 recently became very hard to steer, the steering wheel will not centre once let go either, i checked the power steering fluid and it is not dropping in fluid level at all. the steering is heavy as soon as the car is turned on. can anyone help me please?!?

Link to comment
https://www.sau.com.au/forums/topic/365268-r32-heavy-steering/
Share on other sites

There's a good chance you have suffered the same problem that I had on my R32 a few years back. The wiring loom for the oxy sensor heater shorted, killing the oxy sensor and coincidentally killing the power steering. Took a bit of finding.

try checking the hicas fuses too, hicas is linked with power steering

-D

there is a speed sensor somewhere in the dash , my brother just went through this and i am now experiancing the same prob replaced the sensor and now runs fine

its a steering angle sensor and its located in the steering column

the speed sensors are located on each wheel

-D

hey i just noticed im missing a belt but im not sure what it is, there's the belt on the far left which is fan belt i think, then the middle belt which is power steering, then down the bottom on the far right bout where the intercooler and air intake box are theres pulleys for a belt but my belt is missing, anyone know what this belt is ??

Pretty sure the speed sensor for a r32 is at the back of the dash, connected to the speedo cable. If you've had the dash out recently there is a chance that it wasn't clipped in properly. Having said that, if your speedo is working it's probably not the case.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...