Jump to content
SAU Community

Recommended Posts

Rays Engineering/Volk Racing TE37, 18 x 9JJ +20, 114.3 x 5 PCD, forged monoblock

Great overal condition minus some minor rash on the lip on 3 wheels. One wheel is practically flawless. $2900

001.jpg

002.jpg

003.jpg

004.jpg

005.jpg

006.jpg

010.jpg

011.jpg

012.jpg

013.jpg

014.jpg

015.jpg

016.jpg

017.jpg

LE37, 18 x 9.5JJ +22, 114.3 x 5 PCD, forged monoblock

Slight markings along the lip, VGC. $2800 ono

img076.jpg

img077.jpg

img078.jpg

Yokohama Advan TC II 18x8.5J +25 front/18x9.5J +29 rear, PCD 114.3 x 5

These rims are brand new - fronts are still in plastic wrapping, along with 2 small boxes (not sure what's in them - nuts/valves?). Rears have wheel covers. One of the rim has a minute scratch which is really unnoticable. These rims are made by some special casting process which makes them super light. Holding them side by side I'd say these rims are slightly lighter then the LE37's (which are forged). These rims are no longer made by Advan.

Price: $3000 ono

img079.jpg

img080.jpg

img081.jpg

img082.jpg

Feel free to PM me or sms me on 0410343738

Pickup from 3166, also able to courier them Australia Wide for a small cost.

Link to comment
https://www.sau.com.au/forums/topic/365363-hi-end-wheel-sale-redux/
Share on other sites

He can think what he wants! Notice the 'ONO' on the end!

ROFL!....big diff between thinking and knowing Jethro.

I wont poo poo you!

anyway...good luck with the sale...lol

Edited by Jetwreck
  • 3 weeks later...
  • 2 weeks later...

Few quick questions :)

First, do you know if the Advan's are at all paintable ? I love the rim, but the colour isnt really 'my thing' lol. Secondly, how much of a rush to sell the last set of rims?

:)

Hmm not sure about the paintable part - I'd assume they would be...aren't all rims paintable? You might have to ask elsewhere...

Not really in a rush...since the Ray's wheels are gone I've recouped enough space and $$$ to ward off the missus...haha

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have a 6 boost manifold and it has loads of bends etc. turbo has a cover however manifold doesn’t so I started to wrap what I could without taking turbo off. Very restricted area   are you stating wrapping could lead to cracking weld? Is that because heat is retained?    i have a exhaust gas temp right after turbo and it hits 700degree or 800 at times.   there are areas which is impossible to reach with fibre glass cloth. Is there anything I could apply such as the photo shared earlier which would formulate around exhaust pipe in difficult to reach areas, sort of like aluminium foil flexible to shape it in place?   i think from earlier reply you mentioned acl? Is this what you meant?   https://www.nstparts.com/product/acl-heat-shield-700x275     photo of my engine bay   https://ibb.co/9grHsMN https://ibb.co/bXC8KRM https://ibb.co/KV3kGZc   I am trying to cover bottom of the exhaust manifold which joins the turbo. Only way is to take turbo and possible manifold out as it also touches the engine mount which I don’t fancy doing
    • So....I managed to fix the belt coming off problem, but unfortunately i destroyed my oil pump. While testing and hitting my rev limiter a bunch, my oil pump took a shit. I actually heard it break. In my great wisdom i decided to hit redline 5 times (original plan). Lowered it to 7500 for the soft limiter. Normally it would come off on the first go. The 6th time I hit the limiter the pump broke and as i began accelerating again and hit it the 7th time, oil pressure dropped and the protection kicked in. It actually made a "tink" as if i dropped something hollow.   The motor is pulled and should be rebuilt and put back in 3 weeks. No bearings were spun and i could have gotten away with simply replacing the pump, but since i had to pull the motor....might as well build it   I made a billet tensioner and the belt stayed on without getting frayed. I also made one for a friends R33, but I was thinking of using a hydraulic unit to keep constant pressure on it when the belt stretches.
    • Yeah 98 for me, and 6.7/100 was my actual usage. On the downside the bloody thing still isn't running properly but at least they hybrid system is happy now. It starts but missfires like a bastard, and isn't throwing any code except "missfire". Thanks scoop. I did notice the AFMs are reading quite different at idle 1.33v and 1.67v so 25% variance (and have both changed and swapped them, the issue stays on the driver's side afm) so I'm looking for exhaust restriction (mouse nest?), compression issue or (hopefully not, no physical damage seen) wiring issue. Throttle might also be an issue but that is harder because you can't swap them side to side and not cheap to fire the parts cannon at.
    • I hope you're right and it somehow justifies it's existence!
×
×
  • Create New...