Jump to content
SAU Community

Recommended Posts

Ben, who is feeding you this rubbish............try running -5's (with or without stock boost) and see how they run without a tune....they def have different trim and comp size hence your AFR's will be all over the shop

You're requirement for a tune is based on AFR"S (in this case) not just boost.........I'm not even referring to boost

Cam gear adjusting will affect your valve timing.............a good tune will give you a nice balance between correct AFR's and ignition timing

well this is what ive gathered from the nistune forums and a few other sources

I'd be the first to admit I dont know what Im talking about, which is why imma spend the next 18 months figuring out what I want to do when the time comes - I want to do the brakes/rims/rubbers/suspension and interior over the next year and a bit - performance is not a concern atm

that said, when it does become a priority, it would be good to know wtf is and wtf isnt.

simply telling me that ive been fed rubbish isnt helpful tho.

-D

  • Replies 3.6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

That's fine, and that's why I said, based on your sentiments towards your current setup, you'd be happier IMO with a -5 setup which is pretty much the next step up from where you are now.

Spending $$ on -7's will not see much (maybe a smidge) difference to your current setup.................R34 N1's are a different story again though (they sit somewhere in between your current setup and the -5's if my memory serves me correctly)

Hope that helps a little............good night all :D

That's fine, and that's why I said, based on your sentiments towards your current setup, you'd be happier IMO with a -5 setup which is pretty much the next step up from where you are now.

Spending $$ on -7's will not see much (maybe a smidge) difference to your current setup.................R34 N1's are a different story again though (they sit somewhere in between your current setup and the -5's if my memory serves me correctly)

Hope that helps a little............good night all :D

further truth would be even to say that perhaps the next upgrade just would not be worth it for its purpose.

how often does a daily need 300kw in any case?

-D

-7s are the same as 34 n1s

33 n1s are laggy pos

If you're happy with 300kw then you want -9s as they are basically an updated -7, they make more power but have extremely similar spool times. They are however slightly more expensive. -5s need something to help wake them up. Lots of boost is ideal but obviously not for a standard motor. I use poncams. E85 would help massively too. -5s+E85 would be the perfect street setup on a gtr IMO.

-7s or -9s are the turbos you want.

Just go dash 5s... In my opinion they are the perfect compromise between power and response. My 26 with poncams and 18psi makes a nice 320awkw with nice response and fantastic power delivery. Sure the turbos have a lot more left in them but when i build my motor then ill push for more. Until then Im more than happy with my setup

Congratulations to the f**king retard silver skyline owner who was involved in the hit and run death of a motorcyclist this morning. You have held up 100% of the traffic from anywhere in Adelaide to Wingfield.

yeah its pretty bad, i dont understand how its possible to not even realise you hit someone. the news was quick to mention that police are searching for a silver nissan skyline

http://www.adelaidenow.com.au/news/south-australia/serious-crash-halts-salisbury-hwy/story-e6frea83-1226063866676

"silver or maroon nissan skyline" what? they arent similar colours haha

-7s are the same as 34 n1s

33 n1s are laggy pos

If you're happy with 300kw then you want -9s as they are basically an updated -7, they make more power but have extremely similar spool times. They are however slightly more expensive. -5s need something to help wake them up. Lots of boost is ideal but obviously not for a standard motor. I use poncams. E85 would help massively too. -5s+E85 would be the perfect street setup on a gtr IMO.

-7s or -9s are the turbos you want.

Just go dash 5s... In my opinion they are the perfect compromise between power and response. My 26 with poncams and 18psi makes a nice 320awkw with nice response and fantastic power delivery. Sure the turbos have a lot more left in them but when i build my motor then ill push for more. Until then Im more than happy with my setup

Dohmar, if you're wondering what turbo's to get then you should listen to people with them and they probably would all tell you that any boost level under 18psi is probably not worth your while. its a too laggy setup for between 250-280rwkw. they start coming alive with 18psi. because then when they spool up they go hard!!

i had my 2860's for ages, started on a stock motor and they were crap, laggy as full boost by 5000rpm and only made 210rwkw on 14psi. this was with all stock ecu fuel pump and injectors.

with a rebuild motor the comp was much better cos it wasnt so tired. it managed 250rwkw with still std ecu and 14psi

it wasnt until i got my nistune and injectors and fuel pump that i could push 18psi into it and thats when they came alive. i ran 320rwkw on boostworx dyno.

IMO they're a good turbo for the compromise between a mid 300kw car that you still want to use on the street.

so if you want response and are not looking to be in the 300 club then don't buy them, stick with your N1's or go for -7's or -9's

Okay the ARC intercooler didnt make any difference!

Damn!!

it probably cools better but obviously wasnt the thing causing the flow restriction.

the only things left could be the STD cams or the 3in exhaust.

i'd love the car to have a lumpier idle, but i think with possibly being a home owner in 4 weeks time is going to put a serious halt on getting cams.

looks like i'll have to be satisfied with 365rwkw for a while.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Late to this party but here is your go to shop in perth - https://www.facebook.com/gsautoworksau GTSBOY is on the money cost wise, drive in and out will cost you 15-30k or more.    Some items that will save you money  - plug in link ecu g4x is much cheaper than haltech.   -Pulsar turbo, seem to be "OK" now, never used one myself You really don't have to build the motor, E85, headgasket, studs and a good RB26 will live for ever.    Swapping over the twins won't save much as you still need ecu, tune, fuel system etc.          
    • Welcome back to the scene! Godzilla Motorsports were well regarded back in the day.  My GT-R had work done there prior to my ownership.   SRS (Street Race Solutions) in Toowoomba worth a look.  They've built some pretty wild Skylines. Their YouTube channel is comedic to watch!  I'm sure they're all on the glass BBQ but they get shit done! 🤣
    • Hard to say what the extra connector is, it looks a bit like a coax type connector, so possibly a separate radio/GPS antenna, or even another camera input?  The V37 series (including the Q50), did go through a model refresh in 2020, since Australia didn't get any Q50s newer than 2019, we didn't get any of the refreshed models, so there could also be other unexpected problems to overcome to swap an older Q50 head unit into a new model V37. There probably aren't too many people around that have made these sorts of changes to a Q50/V37, so you might end up being the first if you do decide to go ahead. ACP is Apple Car Play and AA is Android Auto, they are roughly the same thing for the 2 major phone operating systems (Apple's iOS and Android), it allows you to connect your phone and access a number of your phone applications on your car system.  With Nav apps included, so you could use google maps/Waze or whatever your favourite navigation app is, instead of using the built in navi system.  I think this would be a better solution if it is only Navigation that you are looking as swapping the head unit for. GPS signals are the same around the globe as the GPS satellites continuously circle the globe, but it is the head unit that doesn't allow you to load Australian maps, or at least no-one had made an Australian map that will load up on the JDM head unit. Regarding the TV standards, I assume you are referring to the AV inputs?  I haven't ever tried to use them, Japan used a slightly modified version of the US NTSC system, and Australia uses PAL for composite video, that said, I wouldn't be surprised if a video input could work with either system.  That is mostly irrelevant here though, unless you plan to use those inputs for something?
    • If you've got bucket loads of $. Go single. If not, just upgrade the twins, Garrett -9's or whatever the current equivalent is for a healthy 350awkw and leave it at that. Will probably still cost you 10k to do in this day and age.
    • When you looking to buy injectors?? I could possibly sell you my 1d1700s for decent price. Done little work I just need bigger again 😫 
×
×
  • Create New...