Jump to content
SAU Community

Recommended Posts

hi,

im new to skylines, (had mine a week) and have a few questions someone wiser could hopefully answer;

was wondering if i will damage the front diff setup by removing the fuse from the engine bay and making it full time rwd? (untill i finish my awd/rwd switch)

my car is a 1992 r32 gtst-4 with r33 (vg30?) highflow turbo, big front mount, 15psi, 3" straight pipe, brass button clutch + lightened fly wheel etc etc. its just had a dyno tune and only makes 144rwkw at all 4 wheels? i was thinking the power figure would have been much higher than that? it had a blow off valve of some description but i took it off because im not a fan, has given slightly earlier boost but still drops down to about 10psi by the time im in high revs.

the next thing im thinking of doing is a nistune ecu, bee*r rev limiter and an eboost 2. thoughts?

cheers guys.

Josh,

Link to comment
https://www.sau.com.au/forums/topic/365677-r32-gtst-4/
Share on other sites

nope. common mod. get used to driving it in 4wd. it will feel a lot different than the RWD car you had,

as for modding it. search GTS4 on here . dropping another engine in is a bit different as a normal skyline motor will not fit. a stagea 4wd one does though. check my sig for a bit more info (I own a 89 2 door GTS4.)

Link to comment
https://www.sau.com.au/forums/topic/365677-r32-gtst-4/#findComment-5838906
Share on other sites

First and foremost, welcome to the club of skyline ownership.

To answer a few questions;

A VG30 turbo is infact off a 300ZX, so it' either an r33 T3 turbo or a vg30 turbo. Your power figure does seem a little low, but keep in mind the awd system. You get a massive amount of drivetrain loss in terms of power (20-30%). Nistune is a good modification; it will tidy up your tune and unlock some more power. Also, you can get it retuned easily everytime you make a larger modification. As far as electronic boost controllers go, they're good but not essential and you can get by on a bleed valve without trouble. a greddy prospec was one of the first purchases I made for mine and I regret buying it before more important parts - like new coilpacks.

Anyway, enjoy skyline ownership.

Link to comment
https://www.sau.com.au/forums/topic/365677-r32-gtst-4/#findComment-5842776
Share on other sites

Mine - fairly stock - produced 115 awkW (145 rwkW), so your 144 awkW is a pretty fair improvement.

You are probably not aware that the GTS4 does not run permanent AWD, unlike Subarus and Lancers. It only engages the front drive wheels under certain conditions - do a search to discover how the Nissan ATTESSA system works.

I don't understand this desire to disable the front drive. Frankly, if you don't want the AWD, why buy a car with it.

Link to comment
https://www.sau.com.au/forums/topic/365677-r32-gtst-4/#findComment-5842835
Share on other sites

Welcome to gts4 ownership! I like them and am biased. I think the front diff and transfer case are fine removing the fuse. Why? You've now got posts from 3 different gts4, to stagea rb25 engine up graders. If you stay with the rb20, there is a sticky on turbos and upgrades in "forced induction performance".

Link to comment
https://www.sau.com.au/forums/topic/365677-r32-gtst-4/#findComment-5842981
Share on other sites

  • 1 month later...

thanks for all the welcomes :)

*under closer inspection, its an r33 highflowed ballbearing turbo. so a bit of moneys been spent on it.

and to answer a feq questions, i like disconnecting the FWD setup when i want to slide it, and just bought and installed an Apexi AVCR, sooo much better! couldnt be happier with how the car drives now! no boost drop off in high rpms, more stable boost, comes on earlier and smoother etc etc. took a while to tune but well worth the money.

and why wont a normal skyline engine fit!? what about r32 gtr? they use the same awd setup yeh?

aannnddd, thats all the questions i can remember :) thanks for the help/inputs guys.

in the coming weeks im getting nistune ecu, 16psi, forward facing intake plenum, HKS adjustable cam gears (any one know much about driveability changes/performance *if any* from cam gears with stock cams??) catch can, bigger injectors and putting in my bosch 909 fuel pump (anyone know how many horsies a 909 will handle in an rb20?)

hopefully she'll boogie then :) been told to expect around 220-230RWKW? currently making around 180-190 i believe.

Link to comment
https://www.sau.com.au/forums/topic/365677-r32-gtst-4/#findComment-5896248
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah the issue here is that we have a lot of topics, unless we matched on the exact word & phrase we'd get a million topics and the one you want will not likely be in the top 20 or so.
    • Yeah great idea, I have already added R32 Wiring Diagram but we can add as many as we want. 100% ! This has been something I've wanted to do for a while. I thought we could have a way for people to 'suggest' a link be added to the library when they come across something good.  We could kick this along by allowing members (maybe a subset) to tag threads they find to allow us to more easily find/locate/use good content, ie a tag 'for-library' which can then be added to the library and maybe have the tags reviewed and updated to better match the content. This would make it easier then to find the content when not using the library. We can also create pages that have lists of content with specific tags. That would allow us to add a tag and then have it automatically added to a page. We could have a page just for the 'for-library' content that we could then moderate and put wherever.  This excites me, the lack of structure with the amount of content is a little overwhelming.
    • Of course you can. That was a waste. Straight down one oil drain gallery and out the sump hole. Could at least have run the engine a little (obviously with at least minimum oil level on the stick).
    • Oh really? Maybe I'm being silly. I'll get some more shots. I had it higher but found that it went too high after a drive, I never knew this but exhausts can move around a bit when hot (makes sense, just never knew) and when it was higher it would make nice cooking plastic smells. That said, I could put some heat tape on a'la 90's R33 exhausts     Ha, I've spent a lot of my life in castle hill waiting for cars to be done. I think I'd prefer something closer but thanks D. 
    • @Duncan Yes, changed filter every time. I don't have the service manual for the car yet (Car was imported and they removed everything when importing). I've been using the oil change threads in the forum as reference.   @Milkmun The second oil change was after ~4 months after the first months and I wasn't sure about reusing engine oil that was opened. The third oil change happened within 3 weeks of the second oil change and I used the previous leftover oil to just "clean up" the system. (Poured it through while the sump plug was open")
×
×
  • Create New...