Jump to content
SAU Community

Recommended Posts

yes but modern cars include indicators in the main headlight assembly... which is what R33's and R34's do. R32's are pretty much the last of the OG jap muscle...

ah well, at the end of the day its your car.

But to be honest I've entertained ideas of getting clear indicators too. In the end I've decided that I'm gonna go the whole hog n replace em with drag style headlamps which were all the rage in japan's street scene a few months ago as far as R32's went.

Its basically a clear headlamp (no diffusers) with twin xenon headlights and the park light converted to an indicator. The indicator housing is cleared and then painted black on the inside to match the paint of the car. the orange bubble is left unpainted tho with a clear bulb that lights up orange in it, which I find wierd. However the street value of this convesion is about $1000 + shipping... which I couldn't justify on a device that works perfectly fine as it is.

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Its basically a clear headlamp (no diffusers) with twin xenon headlights and the park light converted to an indicator. The indicator housing is cleared and then painted black on the inside to match the paint of the car. the orange bubble is left unpainted tho with a clear bulb that lights up orange in it, which I find wierd. However the street value of this convesion is about $1000 + shipping... which I couldn't justify on a device that works perfectly fine as it is.

i doubt that included the 2 xenon (HID) kits required for the conversion, i scoured with local guys high and low every up(py) garage, and other similar shops in osaka on my last trip to satisfy my hunger for hid. 1000 bucks bought me three kits and no light assy. H4 kit for kawasaki zx7, H4 li/low for 180sx and

H1 for GTR.

if you can hook me up with this kit for approx 1000 i will take one....for sure.

pm me with details.

This is getting off topic, but I highly recommend you don't use "HID conversion" kits as they rely on the pre-exisitng projectors which were never designed for HID/Xenon. If you are serious about HID, you need to retrofit Xenon projectors such as those from the Merc E55, BMW 3/5/7 series, Audi A6/S6, etc, and also get yourself a set of ballasts, wires and bulbs.

LW.

bugger..... HID probaly the best mod ive made to all my rides. turns the hills into daylight, no stretch of the truth, you have to drive with it to believe it.

It may well be better than the original, but unless the projector was specifically designed with a HID setup in mind, its probably less than optimal.

Retrofitting is not that hard if you have the time, inclination and do the research. I will be attempting to retrofit a set of Merc E55 bi-xenon projects/ballasts/etc into an R32 GT-R setup as soon as I can locate some R32 GT-R headlights for a decent price.

To buy all the necessary bits will cost you anywhere from $400-700.

LW.

It may well be better than the original, but unless the projector was specifically designed with a HID setup in mind, its probably less than optimal.

Retrofitting is not that hard if you have the time, inclination and do the research. I will be attempting to retrofit a set of Merc E55 bi-xenon projects/ballasts/etc into an R32 GT-R setup as soon as I can locate some R32 GT-R headlights for a decent price.

To buy all the necessary bits will cost you anywhere from $400-700.

LW.

the three modes (bike and two cars) ive converted are still 100 times better than any globe upgrade......ive tried every brand at every price point still no comparing. i have tested them using a special h/lamp HELLA aiming machine (most good crash/service shops will have one) for car light setup, not too much stray light, and keeps pretty close to original beam projection. may not work optimally but youve got soooo much extra light a small loss is of little concern, even sold a couple of bike conversion kits (reflector ballast globe etc) very popular just cant get my hands on enough S/H HID kits.

the three modes (bike and two cars) ive converted are still 100 times better than any globe upgrade......ive tried every brand at every price point still no comparing. i have tested them using a special h/lamp HELLA aiming machine (most good crash/service shops will have one) for car light setup, not too much stray light, and keeps pretty close to original beam projection. may not work optimally but youve got soooo much extra light a small loss is of little concern, even sold a couple of bike conversion kits (reflector ballast globe etc) very popular just cant get my hands on enough S/H HID kits.

Sorry, re-reading my last post it sounds a bit confrontational -- it wasn't meant too. What I meant was: I don't doubt its better than standard halogen, but if you want the best possible result, you need the right projectors.

Just so you know, reflectors are less effective than projectors. I will be attempting to retrofit a kit like so -- http://cgi.ebay.com/ebaymotors/ws/eBayISAP...ssPageName=WDVW -- into R32 GT-R headlights. By using Hella projectors (from an E55 Merc), ballasts, and high quality Philips D2S bulbs, the output should be as good as possible.

funkymonkey: you can have it -- the glass has ugly lines in it, not totally clear :)

LW.

Um guys, I know you all want it.. but there's a set of clear R32 GTR indicators goin for 13000Y on yahoo auctions :)

http://page4.auctions.yahoo.co.jp/jp/auction/d46798015

gtr32blue-img600x450-1082191660dsc02915.jpg

gtr32blue-img600x450-1082191665dsc02917.jpg

gtr32blue-img600x450-1082191670dsc02918.jpg

Comes with everything you need... get it while its hot fellas.

Briefly describubg it: Its a D Speed indicator, been used for 4 months and it dun come with all the sockets etc, its up to you to use the sockets from your old indicator (which shouldn't be a problem). Ends in 1 day n 1 hour from now.

Hope one of you guys end up with it. if anyone wants me to get it then PM me. Also its best if you guys decide who's gonna get it instead of all of you bidding on it, since its just gonna make it more expensive for all of you.

yeah i saw em last night... btw I've got the cost for the headlights for you dude, I'll email it to you soonish, can you PM me your email addy?

You have PM :( (BTW, did you get my PM about the wheels?)

These ones seem a bit clearer than the d-speed ones you posted a few days ago.... tempting :) I can't quite understand the comment for this one though -- are they aftermarket or OEM ?

http://page6.auctions.yahoo.co.jp/jp/auction/f20785115

LW.

I'd take a gamble n say... different angle dude, it refracts n diffuses more when you look at it from the top. As for wheels, yup got PM, told my agent to look into it :(

you haven't seen clear yet guys... until you see THESE! Unfortunately only for GTSt's so :) to all you GTR fellas :rofl:

I'd take a gamble n say... different angle dude, it refracts n diffuses more when you look at it from the top. As for wheels, yup got PM, told my agent to look into it :(

you haven't seen clear yet guys... until you see THESE! Unfortunately only for GTSt's so :) to all you GTR fellas :rofl:

Yeah, I thought it might be angle, but I have looked quite closely and I am not so sure.

Those clear ones are just standard ones that have had the ribbing sanded off -- you can still see the ribbing around the edges so ha! :rofl:

Edit: Atleast that is my guess :)

LW.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Convert to dual filament bulb   FWIW, it will look odd - I dare say a bit dumb as it looks like your flasher relay has shit the bed.
    • If the RB29 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
×
×
  • Create New...