Jump to content
SAU Community

Recommended Posts

Hey guys im thinking of buying a r34 from NSW. The guy initially bought the skyline from Melbourne

HKS bolt on turbo

Apexi N1 pod

Nismo fly wheel

3.5' full except dump which is stock

hks front adjustable coilovers

koni rear coilovers/shocks

Cusco rear sway bar

when the guy bought it from Melbourne he had to get a engineer certificate to get the car register in NSW, so now when i need to get this registered back in Victoria do i need to get any engineer certificate or anything?

do i just need a roadworthy certificate and just take it to vicroads and register it??

does vicroads also inspect the car?

and one last thing, most the mods above are unroadworthy is that right?

any help would be much appreciated, cheers

Depends on your luck if vicroads will look through the car and depends how much the guy checking knows. But I know when vicroads to check skylines there getting on top of coilovers now and mainly cut hole for intercooler so thats something to keep in mind other than that I would put the stock airbox if you have a cooler.

Your turbo and pretty much everything you listed has to be swapped for stock. Vicroads will inspect any vehicle being brought in for initial registration...ie. Anything not already registered in Victoria. The only real legal modification is a pod provided you haven't also changed the intercooler.

nor me or the seller has any stock parts, wat if i get a appointment at a vicroads in the bush where no one has ever seen a skyline... like lylidale areaish haha

ive registered plenty of VIV vehicles and all they check is the engine number that's it.

Viv is different. You're not bringing in a car from an entirely different state. They have a full history of Victorian repairable write offs up to the point where the write off was entered.

For the record, lilydale tmu are well trained, so why wouldn't the vicroads who have to put up with all their canaries be as well?

Don't be an idiot about it im just giving you the honest truth. All of those items are defectable and unroadworthy. If you find someone to do a dodgy rwc and then they inspect the car and see all that shit on there not only will they tell u to gtfo and pay another booking fee when you come back, you'll get your mechanic in shit for providing a fraudulent document.

They went over my currently registered skyline with a fine toothed comb for a height defect. How do u think they're going to react to what is essentially a foreign car to them?

Stop kidding yourself and be realistic.

nsw engineers certs mean as much to vicroads as nsw roadworthies.

f*ck all.

IF for some reason they let it past on an engineer's, itd have to be victorian. but buckleys chance on that too usually. cuz they'll just send you an EPA. and you cant tell them its ok that your emissions are higher than everybody elses cuz some guy in a workshop said it was safe to drive.

welcome to victoria, where registering, insuring, and in general owning a car is the most painful experience known to man.

  On 30/05/2011 at 1:13 PM, KamikazeNinja34 said:

nsw engineers certs mean as much to vicroads as nsw roadworthies.

f*ck all.

IF for some reason they let it past on an engineer's, itd have to be victorian. but buckleys chance on that too usually. cuz they'll just send you an EPA. and you cant tell them its ok that your emissions are higher than everybody elses cuz some guy in a workshop said it was safe to drive.

welcome to victoria, where registering, insuring, and in general owning a car is the most painful experience known to man.

i just swapped a mazda rx4 from sydney to vic reg car had a nsw engineers report for a ford 9 inch disc brake diff,series 5 turbo engine and change of front brakes.....i didnt even have to take the car there

I bought my car from qld. Fuel rail, injectors turbos, exhaust power fc, cam gears etc etc and they didn't even want to look at it. Just call up, tell them you bought a car from nsw and ask whats needed to be done..they most likely won't check it unless its been in an accident before or was a defect machine in melbourne

in my experience,

if you can keep it Regoed in NSW, Get a Vic RWC attend Vicroads and Transfer the NSW rego to Vic rego. (Give them the NSW plates)

Job done.

we just did it with a VIV registered 34 and that was the advice from Vic roads,

  On 31/05/2011 at 1:21 AM, mastadd said:

in my experience,

if you can keep it Regoed in NSW, Get a Vic RWC attend Vicroads and Transfer the NSW rego to Vic rego. (Give them the NSW plates)

Job done.

Yep, exactly what happened with me :)

  On 31/05/2011 at 2:03 AM, GTS-T_Sedan said:

Yeah its not as hard as people think

Cass you had a defect its completely different to an interstate transfer

Of course they will go over the car when u take it to vicroads clearing a defect

Also depends on what vicroads you go to and who's working there. I've been defected twice for height and once for tyres. They only ever checked the car once and that was for tyres. My most recent was height in the gtr, guy at vicroads basically said the cops were kents for giving me a major just for height. He then he stamped it and i went on my way, didn't check it at all.

Edited by topher_
  On 31/05/2011 at 2:03 AM, GTS-T_Sedan said:

Yeah its not as hard as people think

Cass you had a defect its completely different to an interstate transfer

Of course they will go over the car when u take it to vicroads clearing a defect

also, when we got my first car which was unregistered they also had to inspect it. from what i was led to believe at the time they did, do or can treat an interstate car the same way

  On 31/05/2011 at 6:48 AM, topher_ said:

Yep, exactly what happened with me :)

Also depends on what vicroads you go to and who's working there. I've been defected twice for height and once for tyres. They only ever checked the car once and that was for tyres. My most recent was height in the gtr, guy at vicroads basically said the cops were kents for giving me a major just for height. He then he stamped it and i went on my way, didn't check it at all.

my boyfriend took my car to Burwood when it gone done with a major for height given theyre usually pretty lax about checking it. they also sympathised at having a major put on for height. but said to him, they dont need to check the car for a major defect. unless its for height.

hmmm very interesting on different experiences. Im transferring my license to south australia o be able to drive it on my p plates and going to keep the nsw plates on it for a while and before it expires ill just get the plates to transfer to melb. :D

and oh did i say i use to own this car before in melb

Hey mate I bought a modded GTR (turbo, injectors, fuel pump, ECU etc) from NSW a year or so ago. it still had NSW rego, so all i needed to do was to get a RWC and then just hand the details into VicRoads, because it was already registered under NSW they basically just swapped the details over and there was no need for an inspection. I was also worried I would get reamed if it was to go through an inspection but all was fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...