How To Get All 4 R35 Rear Lights To Be On

[baby34]

Hi,

Just wondering anyone know where i can buy the kit to keep all 4 of my R35 Rear Lights on instead of the two..

Noticed that my R34 has all 4 lights on but the GTR Doesnt.

Thanks

[SlipR35]

  On 03/06/2011 at 5:16 PM, baby34 said:

Hi,

Just wondering anyone know where i can buy the kit to keep all 4 of my R35 Rear Lights on instead of the two..

Noticed that my R34 has all 4 lights on but the GTR Doesnt.

Thanks

The Zele 4 light kit is the best way to go. It's an off the shelf kit and easy to hook up yourself. Did it on my R35 and it worked perfectly. Instructions here: Zele 4 light kit install instructions

I purchased the kit from "Matty32" who is on the thread linked above. Direct link to his site: New Era Parts store

Great service and the kit arrived within the week.

[mattyneweraimports]

hi im "matty32"

if you want the kit just PM me

we have stock

[g35me]

How much for the kit. Nengun do the MCR harness for $185 but they take 4 weeks to post. Can you match that and get it out to me quicker? I don't want the Zele kit as the inner lights end up brighter than the outers which is crap.

[domino_z]

I went with the mcr harness

I had it ready to go before I even picked up the car

You connect it inline with the existing harness, no black box, no splicing, too easy

G35 the Zele may look brighter in pics because of the tighter packed LEDs on the inner vs outer

They both do the same thing, basically send constant power and ground. You could diy if you had a voltmeter and some time to kill

Edited July 16, 2011 by domino_z

[zamnap]

  On 03/06/2011 at 5:33 PM, SlipR35 said:

The Zele 4 light kit is the best way to go. It's an off the shelf kit and easy to hook up yourself. Did it on my R35 and it worked perfectly. Instructions here: Zele 4 light kit install instructions

I purchased the kit from "Matty32" who is on the thread linked above. Direct link to his site: New Era Parts store

Great service and the kit arrived within the week.

Thanks

[R-PWR]

If any1 has an mcr one ill buy it. pm me

[domino_z]

http://www.nengun.com/mcr/4-tail-harness-kit

[skiids]

Hi,

Has anyone whos installed these kits have the issue of having the LEDS on the rear wing illuminated all the time also, so it looks as if your driving around with your foot on the brake?

MCR says their kit dimmley illuminates all 4 tail lights, does the zele kit do the same or is it runnIng full power all the time?

[N/A®]

Not with MCR. Its a 2 minute plug in wiring kit.

[Jonny_r35]

  On 14/01/2012 at 12:45 AM, skiids said:

Hi,

Has anyone whos installed these kits have the issue of having the LEDS on the rear wing illuminated all the time also, so it looks as if your driving around with your foot on the brake?

MCR says their kit dimmley illuminates all 4 tail lights, does the zele kit do the same or is it runnIng full power all the time?

I fitted the Zele kit tonight and the inner tail lights are now illuminated with the same brightness as the outer ones. When you push the brake pedal, only the inner lights are brighter, as normal and the rear wing leds come on, as normal. The rear wing leds are not illuminated until the brake pedal is applied.

It works perfectly and looks much better. There is a switch on the unit to change it back to original spec if needed.

[skiids]

Ok great thanks for the tip..

Who supplied the zele kit to you

[Jonny_r35]

Just Jap in Sydney

http://justjap.com/store/home.php?cat=403

[EuroDB]

Valuable information! Looking forward to seeing your notes posted.

[ossie cossie]

im also looking at doing this. Whats the cheepest way of doing it? I am a sparkie so i could do it myself is this recomended?

[ossie cossie]

Started to make up a home made harness for this on mine, took a couple of diodes and so far got all 4 lights on now, but the small ones seem brighter than the outer ones, probably need some voltage regulators now to dim them down a bit.

JUST A NOTE TO BEWARE OFF.

When i first started to do this i came accross a problem, that with the inner lights on i could start the car without putting my foot on the brake pedal, didnt like that so had to fit 2 other diodes to sort that out.

will let you know as i go along.

[ossie cossie]

All done, diodes and voltage regs. Home made harness, easily removed.

[hzrdus]

Anthony, dont suppose u wanna make some and put them up for sale? id be interested in a set if you ever did consider. looks so much more nicer when all the lights appear to have the same brightness.

[ossie cossie]

brake lights only.

brake and park lights.

4 park lights.

I need to make sure that they work ok first before i decide what to do, i didn,t do it to make money, just wanted too see how hard it was to do, as on other GTR sites, the kit looked like a small box. If anybody wants i can post up the wiring diagram, and some pics of the harness,s but not till next week as i am not neer the car till then.

Tony.

[g35me]

The MCR is literally just a harness. No box at all, just a loom. It's a 10nin install, all 4 lights are the same brightness and no issue with the spoiler light.