Jump to content
SAU Community

Dead Battery

LotusGTR

By LotusGTR,
in General Maintenance

 Share

Recommended Posts

LotusGTR Veteran

LotusGTR

Posted
Posted

One of my 32 GTRs sits around a little - say 6 months since last started. Tried to fire it up the other day using jumper leads from GTR II and she wouldn't turn over. Ended up swapping batteries in the end. I grabbed the dead battery and hooked her up to a jigger I've got that maintains the batteries charge, and it won't charge. If I hook the jigger to any other battery I've got either the red light comes on the charger indicating it needs a top up or the green light comes on telling me the battery is 'full'. So the battery from my oft not used GTR seems to be stuffed. I didn't disconnect it whilst it was sitting around, which in hindsight I probably should have done. So my questions are:

Is my battery stuffed or do I need to hook it up to a proper trickle charger to breath some life into it?

What stuffed the battery? It just sat there after all. Why can't I charge it up? It was new a couple of years ago and gets little use.

How should you store your battery in a car with very infrequent use? (this car is not parked where the jigger can be used). Out of car hooked up to the jigger? Just disconnect and charge up the night before you need to use it?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/
Share on other sites
Piggaz Grand Master

Piggaz

Posted
Posted

Is my battery stuffed or do I need to hook it up to a proper trickle charger to breath some life into it?

What stuffed the battery? It just sat there after all. Why can't I charge it up? It was new a couple of years ago and gets little use.

Thanks.

Thats what killed it... not using it. Get yourself a trickle charger plug it in and leave it. I have one on mine. If I dont put it on charge my car will not start after one week of sitting in the garage!

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5849143
Share on other sites
LotusGTR Veteran

LotusGTR

Posted
  • Author
Posted

Yeah, I know lack of use killed it, but killed it for good? I'd have thought I could bring it back from the dead but it doesn't look that way as it won't charge on my charger / charge maintenance jigger. Is it a chuck out job?

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5849193
Share on other sites
StevenCJR31 Veteran

StevenCJR31

Posted
Posted

Thats what killed it... not using it. Get yourself a trickle charger plug it in and leave it. I have one on mine. If I dont put it on charge my car will not start after one week of sitting in the garage!

+ 1. . .batterys that are allowed to go flat frequently will shit themselves and wont recharge, suggest you get a new battery and when its not in use take it out of the car and put it on charge (away from the car) once every couple of weeks, also makes it harder if some f@#ker is trying to steal your car
Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5849195
Share on other sites
t_revz Grand Master

t_revz

Posted
Posted

your charger may not kick in if the charge in the battery has fallen below a certain voltage. but then if your batt voltage is that low and has been sitting for a while its prob not recoverable.

a sitting battery usually wont die if it still has a charge but a flat battery will die quickly if left sitting

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5851712
Share on other sites
LotusGTR Veteran

LotusGTR

Posted
  • Author
Posted

your charger may not kick in if the charge in the battery has fallen below a certain voltage. but then if your batt voltage is that low and has been sitting for a while its prob not recoverable.

a sitting battery usually wont die if it still has a charge but a flat battery will die quickly if left sitting

Prolly should have said there is a voltage leak somewhere and the battery normally goes dead after 2 weeks. It sat in the car subject to the leak for 6-8 months. Sounds like I've killed it. So new battery needed and this time I'll keep it out of the car (not on concrete) and on a top up charger.

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5852238
Share on other sites
SargeRX8 Grand Master

SargeRX8

Posted
Posted (edited)

Change the water in the battery see if that helps... But seriously it cost no more than $60 for a good century battery, just get a new one.

My battery goes shit after a week or two of not driving. Turns over very slowly, not fast enough to fire the engine so needs to be jumped.

Edited by SargeRX8
Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5853504
Share on other sites
89CAL Grand Master

89CAL

Posted
Posted

Change the water in the battery see if that helps... But seriously it cost no more than $60 for a good century battery, just get a new one.

My battery goes shit after a week or two of not driving. Turns over very slowly, not fast enough to fire the engine so needs to be jumped.

You should never "change" the water In a battery. Just buy some distiller water and top it up with that

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5853561
Share on other sites
SargeRX8 Grand Master

SargeRX8

Posted
Posted

You should never "change" the water In a battery. Just buy some distiller water and top it up with that

Ah lol should have phrased my self a little better but yeah, just get that distilled water from woolies or kmart or something and top her up.

Cheers for pointing it out!

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5855472
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      HY51 Fuga Hybrid

      By MBS206 · Posted

      find it funny everyone claims different fuel chains, do different things with their fuel blah blah blah. We don't have that many fuel terminals in Australia. The fuel tanker trucks drive into the terminal, fill up, and drive directly to the service station and dump out. The majority of fuel you get, is coming out of the same terminals. The variation is actually at the individual service stations and how good their tanks are, as well as how much turn over they actually have. Older fuel stations, that haven't had their tanks replaced are going to end up with the worst fuel. Also a lot of older stations have shit design, and shit maintenance, and end up with more water absorption into the tank. This is when you then get a bad batch of fuel. Other shit things happen, like tanker drivers have a f**k up, and starting to unload the wrong compartment on their truck into the wrong tank. 
    • r32-25t
      MLR's Bogan cruise ship

      By r32-25t · Posted

      Yeah go with that one 
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      This one?? In other news: I cannot tell the difference between my red MX5 with the silver grey hard top......... and the Ferrari 599XX EVO, they might as well be twins, well.......apart from the big wang hanging off the back of the Ferrari...🤔🤣, without the wing they are identical   
    • r32-25t
      MLR's Bogan cruise ship

      By r32-25t · Posted

      Turn it into the pride flag 
    • GTSBoy
      RB26 Block Filler rigidity/deflection test

      By GTSBoy · Posted

      I think you'll find we're confused about what you were trying to do and how you were doing it. I would have thought that block rigidity was something you measured while loading the block in beam or in torsion, and that you would do so before and after grout filling, to see if putting material in there created a "composite" construction with the expected rigidity increase. Notwithstanding that the true function of grout is less about gross rigidity than local (ie preventing bore deflection/splitting and tying the bores to the main bearing locations a little better, etc etc). It is nearly impossible to follow your description of what you've done without closing ones eyes and making "aliens" hand shapes in front of oneself to try to follow the manipulations you've made. It's still unclear to me what you were trying to prove.
×
×
  • Create New...