Jump to content
SAU Community

Recommended Posts

Have just bought a HR33 GTS-t and have had to put a new heavy duty clutch in. I took it down to my mechanic for the reason that it kept on stalling when I started slowing down only to find that I needed a new clutch. Anyway, it keeps stalling!!!! Some times it doesn't do it, other times I find that it drops to about 100-200 and then picks it self back up to about 900 rpm. I have taken this problem to two different mechanics and no one seems to be able to help me!!!! Can anyone help????

Not happy - it is F@#%ing annoying!!!!! Every time I pull up to a set of lights the F@#%ing thing dies on me.

Link to comment
https://www.sau.com.au/forums/topic/3667-stalling/
Share on other sites

You'll know if its got an atmo-venting BOV - they're the stupid things doing the pssshhh noise on gear changes.

If the engine stalls from running to idle, check:

1. the idle speed is correct

2. AAC (Auxilliary Air Control) valve is functioning correctly. One check is to disconnect the plug, see if anything happens.

3. Air-fuel ratio. Probably a crook AFM (Air Flow Meter), but try disconnecting O2 sensor, see if that changes anything.

4. Ignition components.

Link to comment
https://www.sau.com.au/forums/topic/3667-stalling/#findComment-60152
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Murray, appreciate the advice, a few things to think about now 😀 
    • After my million questions, I'll throw in my 2c now.  If I was in your shoes, I would buy the best/most modern ECU available. A Nexus S3 would fit the bill. It is highly likely that this ECU will last the life of the car, regardless of whatever ECU manufacturers develop in the future. Modern ECU's are amazing and will still be amazing in 10 or 20 years time. If you can get e85 relatively close to where you live, I would buy a flex sensor and size the injectors to run e85. I'd go a Walbro 525 fuel pump with relay wiring kit.  Turbo wise, I'd hit up HyperGear and get a pair of the biggest bolt on turbos.  Now for the safety side of things, I'd have the tuner setup the tune to be very soft/safe on 98. Then on the flex tune, a lot of the timing can be put back in on the top end (I'd run full boost on both tunes, but manipulate the power with the timing). This also has the benefit of hopefully delaying the, "bored now, need more boost" that comes with owning a modified turbo car. If you spend most of your time on the 98 tune, the few times your on e85 will hopefully stay special/fun.  The bad news. As your paying for labour and tuning, I don't think this will happen with $10,000. This might be the motivation to learn to do it yourself though, that way instead you'll have the built car and change from the $10,000
    • Cheers Duncan, on club reg and very much a weekender, don't drive it all that hard and don't intend to go overboard at any point in the future too. In my 40's and quite mature driver, just want that little bit more from it 😉 Sounds like, after ensuring everything is in good condition, ECU, Injectors, Fuel Pump and a set of turbos is likely to be my path forward. 
    • 15 years is not too long to hold onto something like that, right?
    • Hey man,   By any chance you still have sunroof for sale ?   Thanks
×
×
  • Create New...