Jump to content
SAU Community

Recommended Posts

I havent read the whole thread but send it to Unigroup Engineering in Girraween. Yavuz tuned our link G4 and was very impresed with it. Add to that the fact he really knows his shit :D I have been ising them for years and woldnt take my car to anyone else. And i use to work for another big name GTR workshop in Sydney

I am actually going to speak to him about using this Ethanol sensor in our car this weekend as Sydney only has a handfull iof servos with E anything and to do away with the laptop on the back seat would be awesome :D

Did you end up speaking to Yavuz about doing it?

We are setting up my car in the next few weeks using this sensor and a G4.

Just wait for a Eflex car to get written off then find it in the local scrap yard then harvest the sensor.

very limited flex fuel cars here in Oz though, U.S. has heaps of GM flex models

that's the cheap option as i have mentioned previously, you can get them for around $50 from the wreckers in the states (and given there's a lot of flex-fuel GM cars, you'll find one pretty easily) but i wasn't going to risk it - $250-$300 for piece of mind is pretty cheap really.

You'd be an idiot to buy something as vital as that second hand. Well maybe if it was a stock engine and it didnt matter but to do it with a built engine is lunacy.

I'd still like to see what Link have to say about which sensor

It either works or it doesn't. Most the sensors are going to have some sort of offset error so you'd need to calibrate it each time anyway.

Regardless if you do the tune from scratch surely it it won't matter, I can't see it giving different values for the same ethanol content, might vary between sensors but as long as you don't tune with one and then change it shouldn't be an issue.

Did you end up speaking to Yavuz about doing it?

We are setting up my car in the next few weeks using this sensor and a G4.

Havent bothered as he said he was already doing one and i have other more inportant things to put my cash into at the moment. We have just bought land so the car wont have anything done to it for some time now :D

  • 6 months later...

98 was 356, E70 (but it might have been mid 60's) was 385, E85 was 400

so at a guess, E40 ~375

Filled up a couple times with United now, and the sensor was flicking between E84 and E85 (it was reading E83 before fill up and was very low) - would be nice if they stay consistent on E85 like Caltex stays consistent on E70 - otherwise i'll have to go back for a tune if it goes into the 90's

I thought with your setup you could anything and it would adjust or does it only map up to 85 percent ethanol?

i can.... up until E85 :D - the E85 tune was done on drum E85 so i knew it was spot on (which it was) and there was only Eflex available at the time, so if i wanted to do a true E85 tune i had to buy a drum. With hindsight though, i should have bought/ordered a drum of E100 and done it that way... i wasn't thinking about United or Fueltown coming back on line, which i should have.

We'll see how it goes, but United in Vic at least seems steady and Caltex has been been rock steady on E70 - i'll probably do an E100 one day just to cover all possibilities :D

Both United and Caltex vary an unacceptable amount. After seeing it with the display it is a little concerning.

Its not as bad you think tuner said b/w 70 and 85 worse case the af mixtures leaned out half a point and if the tunes safe with a few degrees timing left out of max power itll be fine.

Its not as bad you think tuner said b/w 70 and 85 worse case the af mixtures leaned out half a point and if the tunes safe with a few degrees timing left out of max power itll be fine.

I don't really care as that's the sensors problem :D. Either way in United's case, if you're going to sell 'E85' then make sure it's that. Not whatever some drongo thinks is 'sweet' on the day.

My last lot was E77. Another member tested a United elsewhere in Sydney and it was E93 from memory.

  • 7 months later...

Ive been testing United E85 every day or two for the last 2 months and its been spot on, very consistent. United E85 is every bit as good as Drum.

in tank nismo has got me there, and no fueling issues (using too much fuel! hahaha)

but the new 400 Walbro's seem to be the way to go now for big power E85 setups

I don't really care as that's the sensors problem biggrin.gif. Either way in United's case, if you're going to sell 'E85' then make sure it's that. Not whatever some drongo thinks is 'sweet' on the day.

My last lot was E77. Another member tested a United elsewhere in Sydney and it was E93 from memory.

as long as its over 70 its gonna make sweet fk all difference, your tuner would tune it to be safe on both as its only minimal fueling adjustment and should not need a ignition adjustment on a street car for only a 10% ethanol change.
Ive been testing United E85 every day or two for the last 2 months and its been spot on, very consistent. United E85 is every bit as good as Drum.

Awesome news...

Is link g4 still the best bet if going for eflex?

United has been very consistent the whole time i've been using... i guess almost a year now. Never seen it below 82 or above 85 - that is absolutely no issue what-so-ever for the tune

quite a few ecu's are capable to be flex-fuel (to be pedantic 'eflex' is Caltex's high ethanol % fuel, not the ability to run any mixture) - with a 5v signal maybe even a pfc could? who knows...

but the G4 is still a proven piece of kit regardless if you have it set for flex-fuel or not, it's still a great ECU. It's a good choice, but not your only choice if you want to go flex-fuel (which of course you want to! :D) Trent's your man too, easily has the most experience with E85 in Melbourne (poss in the country) and was the first flex-fuel (my car) and done quite a few since. Also very familiar with GTR's as well... obviously :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
×
×
  • Create New...