Jump to content
SAU Community

Recommended Posts

OK so as my screen is pretty much useless with the Nismo dash, i want to use it purely for the VTR input of the TV function.

Everyone time i open it, it opens to the GPS. Any way to force it to TV all the time?

I understand grounding some wire in the rear forces the AUX input of the tuner, but this isnt an issue for me. I just dont want to press 'TV' every time i open the screen.

Yes i could leave it up all the time, but i dont want it on all the time.....

I should try removing the disc from the DVD drive, but i think this will just leave an error up on screen and ill have to press TV anyway

Link to comment
https://www.sau.com.au/forums/topic/366884-m35-tvgps/
Share on other sites

yeah no i dont wanna swap

i have a screen override thingo installed. works fine.

when i push the screen down and pop it back up. it doesnt go back to the last used function (ie TV)

anyway, ill try turning the override off and see if that changes its operation

Link to comment
https://www.sau.com.au/forums/topic/366884-m35-tvgps/#findComment-5851937
Share on other sites

Is it translated?

Before I got the TV sorted I always used the leaf screen, and every time I got back in the car it had switched back to TV. But I've noticed since I did the translation and TV it stays on TV.

Link to comment
https://www.sau.com.au/forums/topic/366884-m35-tvgps/#findComment-5852039
Share on other sites

nope no point in translating. my instrument cluster doesnt supply the information to the screen anymore. not that i used it

anyway, i was wrong. with the stock deck you cant have radio/cd playing on and tv on the screen. i just tested it then, as soon as you hit the TV button, it puts the head unit into the AUX input for the tv sound. if you click anything else on the head unit, it would stop tv showing on the screen. now that i dont have that communication happening, i can have the TV showing on the screen, but whatever i want from the head unit as its an aftermarket one. so this works out perfectly for me!

i have all the cables from jaycar now, so ill be able to run the video to the rear for ipod video to the tuner, and audio from the tuner to the aux input to the tuner :)

i was gonna do it tonight, but CBF really. got 1 month free foxtel on xbox so ill make the most of it haha

Link to comment
https://www.sau.com.au/forums/topic/366884-m35-tvgps/#findComment-5852128
Share on other sites

now that i dont have that communication happening, i can have the TV showing on the screen, but whatever i want from the head unit as its an aftermarket one. so this works out perfectly for me!

i have all the cables from jaycar now, so ill be able to run the video to the rear for ipod video to the tuner, and audio from the tuner to the aux input to the tuner headunit :)

That's what I found with my setup, & I love it. I can watch TV on 2 screens (why? I don't know lol) or what I normally do is have GPS running on the head unit with TV playing on pop up screen & TV sound coming from the headunit. With a switch (the earth on C1 mod) I swap instantly between TV & (say) the leaf screen or whatever I was last on. Too easy.

Also, I edited your post to what I think you meant :rolleyes:

Link to comment
https://www.sau.com.au/forums/topic/366884-m35-tvgps/#findComment-5852200
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...