Jump to content
SAU Community

Recommended Posts

Parts are located in Glenhaven (Next to Castle hill for those who dont no), Sydney

Contact me on 0415611553, Txt or call. If i do not answer please text me

SAU did not allow me to post all photos so if you would like to see them they can be found on this thread on nissan silvia.com http://www.nissansil...1

Wrecking s15 - Alot has gone but are still remaining bits

Car cannot be registered (repairable write-off) but can be fixed, no chasis rail damage, just damage down right side and drivers side floor pan, behind were floor pan is. Currently the car is still together and can be rolled but it is up on jackstands ready to pull everything out.

WHOLE CAR IS IMMACULATE apart from damage - Car is painted in standard gunmetal grey colour

Number of things under the bonnet still remain like all the abs, wiring, standard bov, fuse box, etc.

PLEASE PLEASE PLEASE if people can organise there own postage i would prefer it, im am very busy and dont really have time to organise it. If you can organise somewhere i can drop it to then i will

Im not going to name everything but the most common things that are left and the havent been damaged include:

- Five Stud Conversion front and rear $600 (includeds lines, hubs, bearing, brakes, everything)

- Cross Member - $150

- Front Left Control Arm $50

- Front left tie Rod/end $30

- Rear Subframe - (Includes all arms, diff, 50,000k's on it) $350

- Rear bar(slightly marked from accident, easyfix) $100

- Front Bar (slightly marked from accident, easyfix) $100

- Drivers Mirror $60 (Door if need but damaged)

- Passenger door complete with glass $250

- Passenger front guard $150

- Bonnet, immaculate $250

- Rear left tail light $75

- S15 wheels and good tires $300 (Check photos further down the page, Hankook and Potenza tires, one tire will need replacing and one wheel has been marked in accident

- Sunroof (Whole thing) $350

- got All Windows $$$?

- Carpet, immaculte!!! $100

- Immaculate Steering wheel (airbag) $150 (Is missing one cover off the back)

- I also have another REAR s15 5stud Conversion with hub, disks, brakes, all thats needed $250

There are more small parts so message me and ill let you no if i have them, but from the pictures you can get an idea of whats there and what isnt

255103_10150207897558654_811108653_6914293_3865724_n.jpg

249452_10150207897618654_811108653_6914294_4797136_n.jpg

254355_10150207897953654_811108653_6914301_7734537_n.jpg

247448_10150207898098654_811108653_6914305_8008428_n.jpg

180SX/S13

$50 - 180/s13 front reo

$50 - 180/s13 rear reo

$50 - Brake Booster

$250 - Chromoly Cusco Saftey 21 Full Roll Cage (Missing 2 rear legs and cross over bar, Was qouted around $150 to complete the cage which would be an EXTREMELY cheap roll cage)

$650ono - 5 speed turbo SR Gearbox - been out of car for a week - works perfect - was told it was reconditioned by previous owner about 20,000 ago, car has 72,293ks on it when pulled out - bit dirty needs a clean

$40 - 180SX/S13 front strut brace

$150 - Redtop SR20 Engine Wiring Loom/Harness

$250ono -180sx/s13 AC Condesor/Lines/Pump all the shit needed

$offers - Standard S13/180sx hubs,disks,calipers front and rear

$20 - Dash 10 sandwich plate adaptor (for oil coolers or oilfilter relocators, has one speed flow fitting still on it)

$20 each - 2x Redtop Sr20 Coilpack looms

$80 - 'Sand Blasted' STANDARD sr20det Intake Manifold (Looks brand new)

$20 - Standard sr20 sump

$50 - sr20de Headgasket

$100 - Redtop Injectors with Fuel rail - Speedflow fitting on the end

$30 - Passenger and Center air vents

$40 - Ac braket and tensioner

$40 - Cefiro AFM , Identical to a Z32, no plug

$200 - Z32 AFM

$60 - S13/180sx Gearbox Crossmember and gearbox Mount

$40 - cefiro thermo fan off condensor, will fit anything

$30 - 180sx/s13 window wipers with red new wiperblades

$10 - cefiro window washer bottle and motor

$70 - 180sx/s13 front seat and rail - wear on right of seat, needs vacuum, no stains

$150 - 180sx/s13 front 4stud hubs,knuckles,calipers,disks plus control arms - Good for ke70 or r31 upgrade - give some better stopping and nice camber?

$50 - standard sr clutch and pressure plate , about half worn id say

$40 - Radiator Adaptor Pipe for top radiator hose. Good for mounting sr20 in a datsun ute or similar, so the pipe isnt facing forward like it does standard

251173_10150208075038654_811108653_6915611_2480057_n.jpg

246704_10150208174928654_811108653_6916816_6243953_n.jpg

255162_10150207973688654_811108653_6914871_7162034_n.jpg

255082_10150207973928654_811108653_6914875_7189219_n.jpg

254243_10150207974023654_811108653_6914876_1187154_n.jpg

252465_10150207974123654_811108653_6914878_2293259_n.jpg

249423_10150207898353654_811108653_6914312_4585246_n.jpg

$150 - 180sx altezza tail lights (Basically brand new, were barely used)

253749_10150207898508654_811108653_6914315_5136200_n.jpg

$120 ono - Brand New adjustable suspension coilover springs, comes with coilover keys ( Fit on any type of shock absorber, can be adjusted 2 to three inches in height. For people who dont wanna spend the money on coilovers)

179833_492991676190_565421190_6440498_4546564_n.jpg

$300ono - Recaro Bucket Seat (Swade, Red Stitching, good Condition)

255761_10150207897388654_811108653_6914291_4385780_n.jpg248819_10150207897503654_811108653_6914292_6439993_n.jpg

If your interested please PM or TXT 0415611553

Edited by one_eighty_sx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Gday, Due to not finding much up to date info on this topic I thought I'd make a thread to get peoples latest opinions/recommendations. Background info -  I've got a S1.5 R33 GTST as a fun project car, mainly for street use and occasional drag strip, apart from all the cosmetic things I'll be doing a full rebuild of the engine with forged internals. Since it'll be getting new cams (kelford) and springs to match I thought I might as well get new lifters and valves while I'm at it, the dash says 160k KMs but the engine seems pretty tired, compression measures about 130psi across all cylinders so I'd like to freshen everything up. This is where I'm tempted to just fork out the extra and go solid lifters while it's all apart, aiming for 400-450kw atw with a flex tune. Assuming all supporting mods (oiling, fuel and all bolt ons) with a lightly ported head and turbo to match (yet to make a decision possibly gtx3582r or similar from Hypergear) I've seen the Tomei kits with just the buckets getting around, Supertech sells most things - Supertech High Performance Cam Followers | Trusted Racing Cam Followers Questions -  Has anyone found the Hydraulic lifters to limit them at this power level? Is it usually found that you can just clean the stock lifters and find they work fine?  Does going solid lifters save any headaches/issues with hydraulic lifters in the future? Any recommendations on other things that will need to be replaced, I know I'll need to get the solid profile cams but can you use the same type of valves and springs/retainers and is it recommended to change the guides and stem seals?    Summary -  Basically looking for pros/cons and wanna know if I'll actually need the extra RPMs from solid lifters or it'll just be bragging rights to say it ReVs OvEr 8000 Cheers
    • Ha ha ha, this stuff they had was installing Toshiba PLCs that were made some time in the 1990s, and they were replacing GEM80 PLCs. To let those two talk (staged upgrade along a ~1.2km long building that was split into 4 sections), was a bunch of WinXP machines running Java gateways... There was no way to put something like ProfiSafe in... Most of the HMI machines were WinXP, with Java program, with a custom button board emulating a keyboard... About the only buttons in the operator stations that went direct to the PLCs was the eStop. There was some interesting design stuff in that place...
    • Stock bypass valves are good for plenty of boost.
    • Check for fuel flow out of the outlet end of the rail. Check for spark. Try to start with aerostart (or pressure can brake cleaner or similar solvent in a car) prayed in through TB. If you have fuel and you have spark and it will fire on substitute fuel, then seriously suspect that E85 sitting for ages in your fuel system has destroyed something and put it in your injectors.
    • Nissan stock oil pressure is typically about 1 bar at 1000 rpm plus about 1 bar per thousand revs on top.
×
×
  • Create New...