Jump to content
SAU Community

Recommended Posts

Car: 1996 Series 2 R33 Skyline Gtst

Milage: 140,000kms

Transmission: Manual

Colour: Silver

Location: Sydney - Liverpool

Currently registered?: June 2012 (full year)

Price: $10,000

Contact: Brendan 0425 810 533

Comments / Modifications:

The usual...standard turbo(reconditioned), fmic, boost, turbo back exhaust, Safc, pod, exedy heavy duty clutch, Splitfire coilpacks (brand new)...recently tuned 11psi and 205rwkw.....whilst tuning pushed it to 13psi for a few runs....212rwkw. tuned at unigroup. car is surprisingly economical, get 550kms off a tank easy. been to the drags twice and ran a best of a 13.0 @ 108mph on street tread, get some slicks and you will see a 12.....

it has all the creature comforts like rhino alarm, turbo timer, hi/lo boost trigger switch, boost guage, cd player, aftermarket speakers. Air con recently re-gassed.

Serviced every 4,000kms as my company pays for service, brand new sparkies.

I have owned the car for 3 years, bought it off a fellow SAU NSW member. Car has been a daily its entire life, literally only taken to the drags once and ran it 2 times, dyno'd only for tuning. It has really has a soft life in my hands.

Reason for sale is im looking for a change....been in a skyline now for 5 years....

post-30446-0-72977300-1307504884_thumb.jpg

post-30446-0-13433300-1307504901_thumb.jpg

post-30446-0-04317600-1307504919_thumb.jpg

post-30446-0-72742000-1307504934_thumb.jpg

  • 3 weeks later...
  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • These are small points I should actually add to my original post. GKtech makes an extended slave line for this conversion. It's what I use, and it works well. You'll also need a CD009 slave cylinder.  S/R Chassis Z33/Z34 Conversion braided clutch line As for transmission sensors, you'll need to both extend the wiring and replace the connectors. I can't recall which is which, but one is your neutral switch and the other the reverse switch. As they are just switches, just test for continuity with your transmission in neutral or reverse to figure out which is which. Connectors:  VQ35 neutral Switch Connector | Wiring Specialties VQ35 Reverse Switch Connector | Wiring Specialties 
    • I’ll try and see it could be the release bearing. As for the 4th gear grind maybe clutch doesn’t disengage properly cause it is slightly like very slightly hard to go into first could be due to the slab cylinder pin being short uni clutch is a twin plate.   Ive attached some assembly photos hopefully you can open the link and see maybe detect what’s wrong https://share.icloud.com/photos/0dc2YvW__Hl6jl-l2_0jejjpg https://share.icloud.com/photos/09e0jkWOK-vP48c1cfY6u3ViA https://share.icloud.com/photos/0b4rDmh5R7pK7fb1VtND73a3g https://share.icloud.com/photos/05eeUi_6dC4DVi80jOUYDgb0g https://share.icloud.com/photos/06335TgY1XxyIJal_wkdQLhzw
    • Yeah for sure that is peddle adjustment 
    • What are your thoughts on this after having it for a while, worth getting?
    • Downshifts are harder on transmissions than upshifts, the input shaft naturally slows down once disconnected from the engine so the synchros aren't doing all the work. There's no "natural" tendency for an input shaft to increase RPM. Something is not right there, I don't have a great answer on what. You can try a dedicated GL4 75W90, I plan to switch to Motorcraft XT-M5-QS which is supposedly a very good 75W90 for NB Miatas which have a weirdly sensitive transmission from the factory. I would chase down why your clutch is making a hissing noise, that's not normal. It might be no big deal but in the absence of anything else to investigate I would look at that.
×
×
  • Create New...